• Energy Research
• 7. Clean energy close
• EU close
• AT close
• Aurora Universities Network close

Abstract. Reliable quantification of the sources and sinks of greenhouse gases, together with trends and uncertainties, is essential to monitoring the progress in mitigating anthropogenic emissions under the Paris Agreement. This study provides a consolidated synthesis of CH4 and N2O emissions with consistently derived state-of-the-art bottom-up (BU) and top-down (TD) data sources for the European Union and UK (EU27+UK). We integrate recent emission inventory data, ecosystem process-based model results, and inverse modelling estimates over the period 1990–2018. BU and TD products are compared with European National GHG Inventories (NGHGI) reported to the UN climate convention secretariat UNFCCC in 2019. For uncertainties, we used for NGHGI the standard deviation obtained by varying parameters of inventory calculations, reported by the Member States following the IPCC guidelines recommendations. For atmospheric inversion models (TD) or other inventory datasets (BU), we defined uncertainties from the spread between different model estimates or model specific uncertainties when reported. In comparing NGHGI with other approaches, a key source of bias is the activities included, e.g. anthropogenic versus anthropogenic plus natural fluxes. In inversions, the separation between anthropogenic and natural emissions is sensitive to the geospatial prior distribution of emissions. Over the 2011–2015 period, which is the common denominator of data availability between all sources, the anthropogenic BU approaches are directly comparable, reporting mean emissions of 20.8 Tg CH4 yr−1 (EDGAR v5.0) and 19.0 Tg CH4 yr−1 (GAINS), consistent with the NGHGI estimates of 18.9 ± 1.7 Tg CH4 yr−1. TD total inversions estimates give higher emission estimates, as they also include natural emissions. Over the same period regional TD inversions with higher resolution atmospheric transport models give a mean emission of 28.8 Tg CH4 yr−1. Coarser resolution global TD inversions are consistent with regional TD inversions, for global inversions with GOSAT satellite data (23.3 Tg CH4yr−1) and surface network (24.4 Tg CH4 yr−1). The magnitude of natural peatland emissions from the JSBACH-HIMMELI model, natural rivers and lakes emissions and geological sources together account for the gap between NGHGI and inversions and account for 5.2 Tg CH4 yr−1. For N2O emissions, over the 2011–2015 period, both BU approaches (EDGAR v5.0 and GAINS) give a mean value of anthropogenic emissions of 0.8 and 0.9 Tg N2O yr−1 respectively, agreeing with the NGHGI data (0.9 ± 0.6 Tg N2O yr−1). Over the same period, the average of the three total TD global and regional inversions was 1.3 ± 0.4 and 1.3 ± 0.1 Tg N2O yr−1 respectively, compared to 0.9 Tg N2O yr−1 from the BU data. The TU and BU comparison method defined in this study can be operationalized for future yearly updates for the calculation of CH4 and N2O budgets both at EU+UK scale and at national scale. The referenced datasets related to figures are visualized at https://doi.org/10.5281/zenodo.4288969 (Petrescu et al., 2020).

Ambitious international targets are being developed to protect and restore biodiversity under the Convention on Biological Diversity's post-2020 Global Biodiversity Framework and the European Union's Green Deal. Yet, the land system consequences of meeting such targets are unclear, as multiple pathways may be able to deliver on the set targets. This paper introduces a novel scenario approach assessing the plural implementations of these targets. The Nature Futures Framework (NFF) developed by the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services aims to illustrate the different, positive ways in which society can value nature. It therefore offers a lens through which the spatial implementation of sustainability targets may be envisioned. We used CLUMondo, a spatially explicit model, to simulate plural land system scenarios for Europe for 2050. The model builds on current land system representations of Europe and explores how and where sustainability targets can be implemented under projected population trends and commodity demands. We created three different scenarios in which the sustainability targets are met, each representing an alternative, normative view on nature as represented by the NFF, favoring land systems providing strong climate regulation (Nature for Society), species conservation (Nature for Nature), or agricultural heritage features (Nature as Culture). Our results show that, irrespective of the NFF view, meeting sustainability targets will require European land systems to drastically change, as natural grasslands and forests are forecast to expand while productive areas are projected to undergo a dual intensification and diversification trajectory. Despite each NFF perspective showcasing a similar direction of change, 20% of Europe's land area will differ based on the adopted NFF perspective, with hotspots of disagreement identified in eastern and western Europe. These simulations go beyond existing scenario approaches by not only depicting broad societal developments for Europe, but also by quantifying the land system synergies and trade-offs associated with alternative, archetypal, interpretations and values of how nature may be managed for sustainability. This quantification exemplifies a means towards constructive dialogue, on the one hand by acknowledging areas of contention, and bringing such issues to the fore, and on the other by highlighting points of convergence in a vision for a sustainable Europe.

Abstract District heating dynamic models arise as an alternative approach to in-situ experimental investigations. The main advantage of dynamic modeling and simulation is the possibility to avoid technical and operational risks that might occur during in-situ experimental investigations (e.g. heat demand is not met, damages in the energy systems etc.). Within this study, the authors present two models for an existing district heating system in Cottbus, Germany. One model is developed using the tool EBSILON Professional, while the other one is developed using the Simscape toolbox for physical modeling in Matlab/Simulink. The models were experimentally validated against measured data from the considered district heating system. The results show that the Simscape model has a better fit and better response than the EBSILON model. Yet, some discrepancies were found between the measured and the simulated data and, therefore, the uncertainties of the models were addressed. A comparative study between both tools is presented. The EBSILON models permit only unidirectional flow, whereas the Simscape toolbox permits reverse flow. Nevertheless, the EBSILON model outperforms the Simscape model in computation time. In addition, this study presents an approach for dynamic thermo-hydraulic modeling of district heating networks. This approach is utilized to examine the role of district heating networks as heat storage as an optimization configuration. The numerical results show less start-ups for additional heat sources. Yet, higher heat losses from the network are observed due to the installation of unburied pipelines.

A thin layer of Al2O3nanoparticles has been deposited on top of a water-free PEDOT layer to modify wettability for obtaining pinhole-free homogenous tin-based perovskite films, resulting in better device performance.

Ethanol production from lignocellulosic biomasses raises a global interest because it represents a good alternative to petroleum-derived energies and reduces the food versus fuel conflict generated by first generation ethanol. In this study, alkaline-acid pretreated brewers’ spent grain (BSG) was evaluated for ethanol production after enzymatic hydrolysis with commercial enzymes. The obtained hydrolysate containing a glucose concentration of 75 g/L was adopted, after dilution up to 50 g/L, for fermentation by the strain Saccharomyces cerevisiae NRRL YB 2293 selected as the best producer among five ethanologenic microorganims. When the hydrolysate was supplemented with yeast extract, 12.79 g/L of ethanol, corresponding to 0.28 g of ethanol per grams of glucose consumed (55% efficiency), was obtained within 24 h, while in the non-supplemented hydrolysate, a similar concentration was reached within 48 h. The volumetric productivity increased from 0.25 g/L·h in the un-supplemented hydrolysate to 0.53 g/L h in the yeast extract supplemented hydrolysate. In conclusion, the strain S. cerevisiae NRRL YB 2293 was shown able to produce ethanol from BSG. Although an equal amount of ethanol was reached in both BSG hydrolysate media, the nitrogen source supplementation reduced the ethanol fermentation time and promoted glucose uptake and cell growth.

Energy supply is a global hot topic. The social and political pressure forces a higher percentage of energy supplied by renewable resources. The production of renewable energy in form of biomethane can be increased by co-substrates such as municipal biowaste. However, a demand-driven energy production or its storage needs optimisation, the option to store the substrate with its inherent energy is investigated in this study. The calorific content of biowaste was found unchanged after 45 d of storage (19.9±0.19 kJ g(-1) total solids), and the methane yield obtained from stored biowaste was comparable to fresh biowaste or even higher (approx. 400 m(3) Mg(-1) volatile solids). Our results show that the storage supports the hydrolysis of the co-substrate via acidification and production of volatile fatty acids. The data indicate that storage of biowaste is an efficient way to produce bioenergy on demand. This could in strengthen the role of biomethane plants for electricity supply the future.

The UN Sustainable Development Goals (SDGs) and the Paris Agreement have ushered in a new era of policymaking to deliver on the formulated goals. Energy policies are key to ensuring universal access to affordable, reliable, sustainable, and modern energy (SDG7). Yet they can also have considerable impact on other goals. To successfully achieve multiple goals concurrently, policies need to balance different objectives and manage their interactions. Refining previously contemplated design principles, we identify three key principles - complementary, transparency and adaptability - as highly pertinent for multiple-objective energy policies based on a synthesis of seventeen coordinated policy case studies. First, policies should entail complementary measures and design provisions that specifically target non-energy objectives (complementarity). Second, policy impacts should be tracked comprehensively in both energy and non-energy domains to uncover diminishing returns and facilitate policy learning (transparency). Third, policies should be capable of adapting to changing objectives over time (adaptability). These principles are rarely considered in current policies, implying the need to mainstream them into the next generation of policymaking by pointing to best practices and new tools.

AbstractThe already shown high potential of desiccant evaporative cooling (DEC) systems in full year operation by using the sorption rotor for temperature and humidity recovery is here further analyzed to investigate the potential of certain system configurations. First, the disadvantages of activating the supply air humidifier in full cooling operation regarding the indoor comfort and the reduction of evaporative cooling potential in the overall process are discussed. Secondly, different control strategies for solar thermal systems with triple use (cooling, heating support, domestic hot water preparation) for different applications and climates were analyzed. These scenarios were compared with reference systems using conventional air-conditioning technologies to evaluate the primary energy savings of each case.