• Energy Research
• Closed Access close
• US close
• CN close
• Aurora Universities Network close

Abstract In recent years, distributed energy systems (DESs) have been recognized as a promising option for sustainable development of future energy systems, and their application has increased rapidly with supportive policies and financial incentives. With growing concerns on global warming and depletion of fossil fuels, design optimization of DESs through economic assessments for short-run benefits only is not sufficient, while application of exergy principles can improve the efficiency in energy resource use for long-run sustainability of energy supply. The innovation of this paper is to investigate exergy in DES design to attain rational use of energy resources including renewables by considering energy qualities of supply and demand. By using low-temperature sources for low-quality thermal demand, the waste of high-quality energy can be reduced, and the overall exergy efficiency can be increased. The goal of the design optimization problem is to determine types, numbers and sizes of energy devices in DESs to reduce the total annual cost and increase the overall exergy efficiency. Based on a pre-established DES superstructure with multiple energy devices such as combined heat and power and PV, a multi-objective linear problem is formulated. In modeling of energy devices, the novelty is that the entire available size ranges and the variation of their efficiencies, capital and operation and maintenance costs with sizes are considered. The operation of energy devices is modeled based on previous work on DES operation optimization. By minimizing a weighted sum of the total annual cost and primary exergy input, the problem is solved by branch-and-cut. Numerical results show that the Pareto frontier provides good balancing solutions for planners based on economic and sustainability priorities. The total annual cost and primary exergy input of DESs with optimized configurations are reduced by 21–36% as compared with conventional energy supply systems, where grid power is used for the electricity demand, and gas-fired boilers and electric chillers fed by grid power for thermal demand. A sensitivity analysis is also carried out to analyze the influence of energy prices and energy demand variation on the optimized DES configurations.

Bioelectrochemical systems (BESs) are hybrid systems using electroactive bacteria and solid electrodes, which serve as electron donor or acceptor for microorganisms. When forming a biofilm on the electrode, bacteria secrete extracellular polymeric substances (EPSs). However, EPS excretion of electroactive biofilms in BES has been rarely studied so far. Consequently, the aim of this study is to develop a routine including the electrochemical cultivation, biofilm harvesting, fractionation, and biochemical analysis of the EPS secreted by Geobacter sulfurreducens under electroactive conditions. G. sulfurreducens was cultivated in microbial fuel cell mode on graphite-based electrodes polarized to +400 mV versus Ag/AgCl for 8 d. A maximum current density of 172 ± 29 μA cm-2 was reached after 7 d. The EPS secreted from the biofilms were harvested and fractioned into soluble, loosely bound, and tightly bound EPS and biochemically analyzed. Electroactive cultures secreted significantly more EPSs compared to cells grown under standard heterotrophic conditions (fumarate respiration). With 116 pg per cell, the highest amount of EPSs was measured for the soluble EPS fraction of G. sulfurreducens using anodic respiration, followed by the tightly bound (18 pg cell-1) and loosely bound (11 pg cell-1) fractions of the EPS. Proteins were found to dominate all EPS fractions of the biofilms grown under electrochemical conditions. To the best of the authors' knowledge, these experiments are the first approach toward a complete analysis of the main EPS components of G. sulfurreducens under anode-respiring conditions.

Energy supply is a global hot topic. The social and political pressure forces a higher percentage of energy supplied by renewable resources. The production of renewable energy in form of biomethane can be increased by co-substrates such as municipal biowaste. However, a demand-driven energy production or its storage needs optimisation, the option to store the substrate with its inherent energy is investigated in this study. The calorific content of biowaste was found unchanged after 45 d of storage (19.9±0.19 kJ g(-1) total solids), and the methane yield obtained from stored biowaste was comparable to fresh biowaste or even higher (approx. 400 m(3) Mg(-1) volatile solids). Our results show that the storage supports the hydrolysis of the co-substrate via acidification and production of volatile fatty acids. The data indicate that storage of biowaste is an efficient way to produce bioenergy on demand. This could in strengthen the role of biomethane plants for electricity supply the future.

Abstract Predicting heat transfer is a primary task in the design of open-cell foams. When a Local Thermal Non Equilibrium (LTNE) model is employed, convection heat transfer between the solid and fluid phases is considered, and a volumetric heat transfer coefficient needs to be defined. Some recent studies pointed out that the effects of developing convection heat transfer between the fluid and the solid in a foam are to be taken into account. The developing thermal flow of air through an open-cell foam, with a uniform heat flux solid/fluid boundary condition, is investigated numerically in this paper. The geometry is modeled with reference to Kelvin's tetrakaidecahedron foam model. A correlation among the porosity, the cell diameter and the ratio of heat transfer surface to volume is derived. Three regions are identified along the flow direction: an impingement region, a thermally developing region and a thermally developed region. Dimensional and dimensionless convection heat transfer coefficients have been predicted numerically as a function of the axial coordinate of the foam, for different values of the Reynolds number and the porosity. A correlation is presented among the predicted values of the volumetric Nusselt number, the porosity, and the Reynolds number in the thermally developed region, which is in good agreement with experimental data and numerical predictions by other authors. Finally, the analysis of the convection heat transfer through a single foam cell, at a local pore-scale, is presented.

We censused primate populations at three non-hunted ‘terra firme’ forests of south-eastern Colombian Amazonia. The aggregate biomass densities of diurnal primates at all sites were amongst the lowest recorded for any non-hunted forest in western Amazonia and elsewhere in the Neotropics. Densities of red howler monkeys were low, as is typical in Amazonian terra firme forests far removed from white-water rivers, and densities of woolly monkeys were 1.5–3.5 times lower than those estimated for this species in central-western Brazilian Amazonia. Densities of small to mid-sized primates except for brown capuchins (Cebus apella) and white-faced capuchins (Cebus albifrons) were similar to those of other oligotrophic Amazonian forest sites. Our results are in agreement with other studies showing that terra firme forests of lowland Amazonia typically sustain a low biomass density of primates and other mid-sized to large vertebrates. Large reserves are therefore required to assure the viability of primate populations in oligotrophic systems. Given the escalating negative impacts of human habitat disturbance and hunting in Colombian Amazonia, we urge that a baseline sampling protocol to quantify the abundance and distribution of the harvest-sensitive vertebrate fauna be established within protected areas and the large indigenous reserves so that conservation efforts can be defined and implemented.

Fusarium poae is one of the Fusarium species commonly detected in wheat kernels affected by Fusarium Head Blight. Fusarium poae produces a wide range of mycotoxins including nivalenol (NIV). The effect of temperature on colony growth and NIV production was investigated in vitro at 5-40 °C with 5 °C intervals. When the data were fit to a Beta equation (R2 ≥ 0.97), the optimal temperature was estimated to be 24.7 °C for colony growth and 27.5 °C for NIV production. The effects of temperature on infection incidence, fungal biomass, and NIV contamination were investigated by inoculating potted durum wheat plants at full anthesis; inoculated heads were kept at 10-40 °C with 5 °C intervals for 3 days and then at ambient temperature until ripening. Temperature significantly affected the incidence of floret infection and fungal biomass (as indicated by DNA amount) in the affected heads but did not affect NIV content in the head tissue. Inoculation of potted plants with F. poae did not reduce yield.

In this paper, statistical analysis of lightning-induced voltages on distribution lines accounting for lossy ground is proposed. The analysis is performed by means of a Monte Carlo-based probabilistic approach. It aims at deducing parametric distributions that best fit the probability density functions of the induced voltages. A lightning model based on step-function channel-base current is employed.

Livestock farming and its products provide a diverse range of benefits for our day-to-day life. However, the ever-increasing demand for farmed animals has raised concerns about waste management and its impact on the environment. Worldwide, cattle produce enormous amounts of manure, which is detrimental to soil properties if poorly managed. Waste management with insect larvae is considered one of the most efficient techniques for resource recovery from manure. In recent years, the use of black soldier fly larvae (BSFL) for resource recovery has emerged as an effective method. Using BSFL has several advantages over traditional methods, as the larvae produce a safe compost and extract trace elements like Cu and Zn. This paper is a comprehensive review of the potential of BSFL for recycling organic wastes from livestock farming, manure bioconversion, parameters affecting the BSFL application on organic farming, and process performance of biomolecule degradation. The last part discusses the economic feasibility, lifecycle assessment, and circular bioeconomy of the BSFL in manure recycling. Moreover, it discusses the future perspectives associated with the application of BSFL. Specifically, this review discusses BSFL cultivation and its impact on the larvae's physiology, gut biochemical physiology, gut microbes and metabolic pathways, nutrient conservation and global warming potential, microbial decomposition of organic nutrients, total and pathogenic microbial dynamics, and recycling of rearing residues as fertilizer.