• Energy Research
• 2016-2025close
• engineering and technology close
• Aurora Universities Network close

This paper deals the study of the lead-acid behavior and its modelling based on the Kinetic Battery Model. Results of experimental tests are used to realize the analysis and to estimate the model parameters. These last can serve for prediction and estimation of the battery lifetime according to the actual operating conditions.

Abstract The combined production of electricity, heat and cold by a polygeneration system connected to a district heating and cooling network can provide high energy utilization efficiency. The inherent complexity of simultaneous production of different services and the high variability in the energy demand make combined cooling and heating systems performance highly dependent on the operational strategy. In this paper, an operational optimization method based on the moving average of real-time measurements of energy demands and ambient conditions is proposed. Real energy demand data from a district heating and cooling network close to Barcelona, Spain, are used to test the method. A complex polygeneration system is considered, consisting of an internal combustion engine, a double-effect absorption chiller, an electric chiller, a boiler and a cooling tower. A detailed modelling of the system is provided, considering partial load behavior of the components and ambient conditions effects. Results of the real-time optimal management are discussed and compared to traditional operational strategies and to the ideal optimal management achievable with perfectly accurate forecast of energy demands. Moreover, the optimal width of the window adopted for the moving average of real-time data is identified.

Light sources are being competitive in the current market. Several types of these products have been widely used in the last two decades. They play a major role on the low voltage network as they produce and inject undesired noise onto the transmission lines of the PLC channel. This noise can be of a serious and negative effect when using the power line communications system to control the automatic switching of lamps in residential areas and public places. The main colour low energy indoor light sources that exist in the market, such as, LEDs and CFLs have been tested for the noise generation on the PLC channel and the results are analyzed and shown in this study. A mathematical analysis of LED bridge rectifier is introduced in this study.

Abstract The 21st Conference of the Parties (COP21) of the United Nations Framework Convention on Climate Change (UNFCCC) marked a milestone in the course of international efforts on global climate action. As part of the COP21 side events, on December 4th the Lima Paris Action Agenda presented a half-day of presentations and round table discussions titled Focus on Private Finance. The event was supported by the Secretary-General of the United Nation, Caisse des Depots, and the I4CE Institute for Climate Economics. This conference report summarizes the findings of the session and the messages delivered by finance industry representatives. Significant investment in low carbon assets is required to maintain global temperature increases below 2 °C. The two resounding themes throughout the session were that in order to attract capital for low carbon investments fossil fuel subsidies must end and a higher carbon price is needed to incentivise investment. Furthermore, accounting and regulatory bodies need to implement more stringent disclosure and reporting requirements so that climate risk is properly understood by investors. There is significant appetite for investment in the low carbon sector which is demonstrated by the growth in the green bond market. Financial institutions have a role to play in aggregating, structuring and de-risking investments to facilitate private finance investment. Policy makers also need to improve the investment environment by creating consistent and stable long term policies which will give investors' confidence.

Renewable energy will be a crucial ingredient in the transition to a more sustainable future. The renewable energy sector requires a variety of financial support mechanisms in order to further consolidate and expand. Currently, the most prominent renewable energy support mechanisms are feed-in tariffs and renewable energy auctions. Although these mechanisms have been used and analyzed extensively in Western countries and, more recently, economies in transition, they have rarely been examined in the Arab Gulf region. Yet, particularly the Gulf Cooperation Council (GCC) states have undertaken important steps towards renewable energy adoption, which could be greatly facilitated with the use of financial support mechanisms. This paper analyzes the feasibility of feed-in tariffs and renewable energy auctions adoption in GCC. Based on an extensive meta-analysis of the literature on these two mechanisms in both developed and developing countries, the paper identifies a set of conditions necessary for success and evaluates the presence of favorable these conditions in the GCC context. Our findings reveal that while conditions that would ensure political feasibility are largely absent for both types of mechanisms, auctions could be a more successful strategy at the moment.

The EU has long pursued relatively ambitious climate and energy policies, often against the backdrop of what has been termed the EU ‘polycrisis’. This paper introduces a special issue which seeks t...

Abstract Coal energy landscapes have changed dramatically over the last decades, including geographic shifts in production and consumption, technological changes that have reduced labour demand and led to relatively new mining practices (e.g. invasive mountain-top approaches), changed economic footprints, a shutdown of capacities or a complete end of mining in many regions with massive impacts on regional and local economies, community well-being, social capital, et cetera. Then the Covid-19 pandemic and Russia´s invasion of Ukraine have fundamentally affected the global economy, disrupted energy markets, and shattered existing estimates about development trends, challenging the progress and speed of the low-carbon energy transition and coal phase-out. This article provides a brief reflection on the changing landscapes of coal and their possible futures, and serves as an introduction to the Special Issue of Moravian Geographical Reports on “The death of coal in the energy transition? Regional perspectives”.

The increasing demand for energy and commodities has led to escalating greenhouse gas emissions, the chief of which is represented by carbon dioxide (CO2). Blue hydrogen (H2), a low-carbon hydrogen produced from natural gas with carbon capture technologies applied, has been suggested as a possible alternative to fossil fuels in processes with hard-to-abate emission sources, including refining, chemical, petrochemical and transport sectors. Due to the recent international directives aimed to combat climate change, even existing hydrogen plants should be retrofitted with carbon capture units. To optimize the process economics of such retrofit, it has been proposed to remove CO2 from the pressure swing adsorption (PSA) tail gas to exploit the relatively high CO2 concentration. This study aimed to design and numerically investigate a vacuum pressure swing adsorption (VPSA) process capable of capturing CO2 from the PSA tail gas of an industrial steam methane reforming (SMR)-based hydrogen plant using NaX zeolite adsorbent. The effect of operating conditions, such as purge-to-feed ratio and desorption pressure, were evaluated in relation to CO2 purity, CO2 recovery, bed productivity and specific energy consumption. We found that conventional cycle configurations, namely a 2-bed, 4-step Skarstrom cycle and a 2-bed, 6-step modified Skarstrom cycle with pressure equalization, were able to concentrate CO2 to a purity greater than 95% with a CO2 recovery of around 77% and 90%, respectively. Therefore, the latter configuration could serve as an efficient process to decarbonize existing hydrogen plants and produce blue H2.

Hybrid electric propulsion in the aviation field is becoming an effective alternative propulsion technology with potential advantages, including fuel savings, lower pollution, and reduced noise emission. On the one hand, the aeroengine manufacturers are working to improve fuel consumption and reduce pollutant emissions with new combustion systems; on the other hand, much attention is given to reducing the weight of the batteries increasing the energy density. Hybrid electric propulsion systems (HEPS) can take advantage of the synergy between two technologies by utilizing both internal combustion engines (ICEs) and electric motors (EMs) together, each operating at their respective optimum conditions. In the present work, some numerical investigations were carried out by using a zero-dimensional code able to simulate the flight mission of a turboprop aircraft, comparing fuel consumption and pollutant emissions of the original engine with other two smaller gas turbines working in hybrid configuration. An algorithm has been implemented to calculate the weight of the batteries for the different configurations examined, evaluating the feasibility of the hybrid propulsion system in terms of number of non-revenue passengers.

Abstract District heating dynamic models arise as an alternative approach to in-situ experimental investigations. The main advantage of dynamic modeling and simulation is the possibility to avoid technical and operational risks that might occur during in-situ experimental investigations (e.g. heat demand is not met, damages in the energy systems etc.). Within this study, the authors present two models for an existing district heating system in Cottbus, Germany. One model is developed using the tool EBSILON Professional, while the other one is developed using the Simscape toolbox for physical modeling in Matlab/Simulink. The models were experimentally validated against measured data from the considered district heating system. The results show that the Simscape model has a better fit and better response than the EBSILON model. Yet, some discrepancies were found between the measured and the simulated data and, therefore, the uncertainties of the models were addressed. A comparative study between both tools is presented. The EBSILON models permit only unidirectional flow, whereas the Simscape toolbox permits reverse flow. Nevertheless, the EBSILON model outperforms the Simscape model in computation time. In addition, this study presents an approach for dynamic thermo-hydraulic modeling of district heating networks. This approach is utilized to examine the role of district heating networks as heat storage as an optimization configuration. The numerical results show less start-ups for additional heat sources. Yet, higher heat losses from the network are observed due to the installation of unburied pipelines.