• Energy Research
• Aurora Universities Network close

The presented article will describe an 'effect-cause' model for the purpose of simulating the energy consumption of DC fed light rail vehicles. The model will assess the advantages of hybrid vehicles in terms of energy consumption, network power and voltage variations, line current and losses; and will help sizing and designing a supercapacitor based energy storage system (ESS) for both on-board, and stationary applications. The proposed modeling needs to allow the ESS sizing according to the objective that needs to be achieved, being braking energy recovery, voltage drop compensation and peak power shaving the most common goals of ESS use in hybrid vehicles. The needed power and energy levels will vary in function of the vehicle features and the driving cycle followed. This all can be determined by the quasi-static simulation tool to ease the design process. Another objective of the modeling tool is to evaluate the behaviour of the vehicle power flow controller, which manages the power from/to the ESS in function of the state of several variables.

The ever-increasing demand of laccases for biodelignification, industrial oxidative processes and environmental bioremediation requires the production of large quantities of enzymes at low cost. The present work was carried out to reduce laccase production costs in liquid fermentations of the white-rot fungus Pleurotus ostreatus through two different approaches. In the first, screening of fungal spent media as natural laccase inducer was performed, eliminating the presence of potentially toxic/recalcitrant and expensive exogenous inducers in the culture broth. In the latter, breeding of different strains of P. ostreatus, screened for their laccase productivity, was performed by cross-hybridisation, avoiding genetic transformation and mutagenic treatments that could produce organisms not suitable for "natural or safe processes". A laccase production level close to 80,000U/L by combining the two approaches was achieved. Autoinduction and classical breeding represent promising tools for the improvement of fungal fermentation without affecting the disposable costs that also depend on the eco-compatibility of the whole process.

Metadata only record Within the last thirty years in the West African Sahel, farmers have started to implement agroenvironmental practices which have allowed them to improve the soil quality and increase crop yields. Using two examples of land rehabilitation in Africa, this paper examines the technical and institutional innovations and their impacts on the ability to meet food demand for the growing population. Agroenvironmental techniques incorporate trees into the agricultural landscape, which improves water retention in the soil, increases the supply of nutrients, reduces wind erosion, and provides other marketable tree products. This large-scale effort has created income opportunities for farmers, benefited women, and increased food supply for many African families.

AbstractCalorimetry and other on‐line techniques are used for the first time as complement to the traditional off‐line methods in order to follow the growth of the green Chlorella vulgaris microalgae. A 2‐L photo‐bio‐reactor was adapted from a commercial calorimeter used previously to study heterotrophic microbial growth. An external source of light was added to favor the photosynthesis of the autotrophic cells. Heterotrophic growth was also tested with external glucose in the broth. A third mode, mixotrophic, allowed faster autotrophic plus heterotrophic growth. Calorimetric measurements were performed considering the corresponding calibrations in order to consider only the energy involved during the microalgal growth. The three different modes of Chlorella cultures were energetically characterized. Besides calorimetry, the weight of diluted nitric acid added to maintain the pH of the culture was correlated with the cellular growth and the nitrogen composition of the algae. Additionally, the on‐line infrared spectroscopy proved to be an efficient technique to follow the composition of the broth in glucose, nitrates, and phosphates. These results were compared and complemented with some classic off‐line techniques used to track this kind of cultures. Biotechnol. Bioeng. 2007;96:757–767. © 2006 Wiley Periodicals, Inc.

Abstract In the present work, the hygrothermal behavior of a wall structure made of a novel biobased material, i.e. date palm fiber reinforced concrete was investigated. In this context, a specific setup was developed which allows simulating a bi-climatic environment with separate outdoor and indoor environments. This device made it possible to apply various scenarios of static / dynamic hygrothermal loading to the outer side of wall, involving variation/cycling of temperature (T) and /or relative humidity (RH). During these experiments, resulting variations of T and RH across the wall thickness were monitored with in-situ sensors. Outstanding thermo-hygric phenomena were highlighted, such as high coupling effect between heat and moisture transfers, resulting from evaporation-condensation and sorption-desorption processes. Besides, significant thermal and hygric inertia was observed through the Date Palme Concrete (DPC) wall. The response time of this DPC wall to temperature variations remains shorter than in the case of humidity variations. Even so, large damping effect is obtained compared to outdoor boundary conditions, which make this DPC wall a good candidate for mitigating overheating during summertime and reducing interstitial condensation as well.

In order to protect our health and the environment, numerous limit and guideline values have been laid down for substances and contaminants that need to be regularly monitored. In such cases, the result of an analytical measurement is compared with its corresponding limit value, and a conclusion is then drawn as to whether the given limit has been violated or not. A simple approach to this would be to simply check whether the measured value is higher than the limit value or not. However, this approach is only acceptable when the measured value is far from the limit value. In cases where the analytical result is close to the limit value, the measurement uncertainty must also be taken into account when deciding whether an observed limit value transgression is significant or not—as, for example, demanded in DIN EN 17025 [1]. Therefore, it is very important that chemical laboratories that perform routine tests for limit value transgression determine the measurement uncertainties associated with their methods by long-term validation [2, 3]. However, even in cases where a measurement result is presented together with its measurement uncertainty, clear rules should be established for comparing the measured value with a limit or guideline value [4, 5]. If such rules are misunderstood or ambiguous, feelings of insecurity can arise among the decision makers. If systematic errors are excluded, the measurement uncertainty can be reduced to random errors and dealt with statistically. Therefore, statistical concepts can be used to unobjectionably and reproducibly justify a decision made about whether a limit value has been violated or observed, and on the other hand to estimate the analytical effort required to achieve significant results. A test result leading to the statement that the limit value μ0 (in analogy to the terminology of clinical chemistry [7, 8]) has been transgressed will be called “positive,” while an inconspicious result will be termed “negative.” In this case, a test for a limit value transgression can lead to four possible outcomes, as listed in Table 1. Two types of erroneous outcome can occur, namely a false-positive (type I error) or a false-negative (type II error) result. The probability of a type I error is usually denoted α, and that of a type II error β.

This paper presents a comprehensive review of all correlations and experimental studies available in the literature to determine the heat transfer coefficient of supercritical CO2 flowing in heat exchangers. The different applications in which it is used are also reviewed and discussed. The correlations obtained from extensive experimental measurements are presented for different geometries (horizontal, vertical and inclined tubes, closed-loop circular pipes, and mini-channels) and dimensions. The review shows that there is a lack of a unique universal correlation for each geometry, suggesting the need for more work in this area. The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES), and the funds received by the Royal Society of New Zealand. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.