• Energy Research
• 2016-2025close
• 6. Clean water close
• 4. Education close
• Aurora Universities Network close

Dolomite-based binders are characterised by interesting technical and environmental features. For their synthesis, sources of both CaO and MgO are required. The idea developed in this work is to couple the synthesis of dolomite-based binders, starting from a natural dolomite, through the concept of concentrated solar energy (needed to drive the endothermal dolomite calcination process) in fluidised bed reactors. To this end, a fluidised bed system, where the concentrated solar radiation is mimicked by the use of Xe-lamps (short-arc), has been set up and operated. Natural dolomite (sieved in the 420-590 ?m size range) was calcined at a nominal temperature of 850 °C, and bed temperature profiles during solar-driven calcination were investigated. Then, four binders were prepared by mixing slaked dolomite (obtained from the hydration of solar calcined dolomite) with either blast furnace slag or coal fly ash as supplementary cementitious materials. The binders were hydrated for curing times ranging from 7 to 56 days. X-ray fluorescence, X-ray diffraction and combined differential thermal and thermogravimetric analyses were employed as characterisation techniques both to analyse the chemical composition of starting materials and to investigate the evolution of the hydration in the four systems.

Domestic (household) biogas plants constitute a growing sub-sector of the anaerobic digestion industry worldwide but have received low interest for improvements. The Chinese dome digester (CDD 1), a major type of domestic biogas plants, is a naturally mixed, unheated and low technology reactor mainly used in rural and pre-urban areas for cooking using animal manure. In this study, a multiphase Computational Fluid Dynamics (CFD) model was applied to evaluate an optimized CDD design and outcomes were compared with results of pilot scale experiments. The optimized digester (CDD2) under goes self-agitating cycles created by the pressure variation from the produced biogas with the aid of a baffle at the top of the reactor, whereas the blank (CDD 1) does not self-agitate. The optimized digester has two pressure zones to improve mixing viz. the self-agitation cycles. The optimized digester is characterized by more, stable and improved hydraulic characteristics and mixing.

The effect of trace elements (TEs) addition and NaOH pretreatment on the anaerobic digestion of rice straw was investigated in batch tests. Co, Ni and Se were added to the raw rice straw at different dosages. The NaOH pretreatment was applied to the rice straw both alone and in combination with the addition of TEs, in order to evaluate potential synergistic effects of the pretreatment and the TEs supplementation on the biogas production yields. The results obtained showed that the alkaline pretreatment was more effective than the TEs addition in increasing the cumulative biogas production, causing a 21.4% enhancement of the final biomethane yield, whereas the increase due to TEs dosing was not statistically significant. The analysis of volatile fatty acids (VFAs) confirmed that the NaOH pretreatment resulted in a higher production of VFAs, indicating an increased hydrolysis, while TEs addition did not cause significant changes in the VFA concentrations.

With reference to a classical wet tank equipped with a wastewater submersible pump, in this research, an advanced numerical model has been used in order to obtain the optimal pump scheduling of on/off operation and variable pump speed. Then, in order to evaluate the time decay of pump performances, the mechanical wear has been artificially simulated and the performance curves have been experimentally obtained for different rotational speeds. Finally, the benefits, as well as the feasibility, of pump scheduling have been evaluated for differing operating conditions. According to the results, the optimal pump scheduling achieves large energy savings up to 43%, for soft mechanical wear. If the mechanical wear is considered, the energy savings are large as well, between 35.60% and 26.70%, for medium and hard mechanical wear, respectively. On the other hand, the limitation of such a strategy has been highlighted: the feasibility of pump scheduling is limited by the elevation of the downstream tank. According to the results, energy savings can be achieved until the elevation of the downstream tank is 67% of the pressure head at the best efficiency point, whereas such percentage decreases to 50% for hard mechanical wear. Finally, the results show that plant efficiency is strongly affected by the mechanical wear: an accurate maintenance of the pumping system is therefore recommended in order to attenuate the time decay of pump performances.

We combined profiling of the bloom-forming and potentially toxigenic cyanobacterium Planktothrix rubescens using a multiparameter probe equipped with a phycoerythrin sensor (in vivo fluorometry, IVL) in Lake Mondsee, Austria, with flow cytometric live analyses of discrete samples taken from several depths in the upper 20 m of the water column. Results obtained by IVL and acoustic flow cytometry (AFC) were compared to microscopic analyses of integrated (0-21 m) water samples using fixed material. This comparison was made because the integrated samples are used for the Austrian monitoring programme according to the EU Water Framework Directive. We demonstrate that AFC provides quantitative analyses of the filaments of P. rubescens that are significantly correlated to IVF and microscopic analyses, allowing rapid (within hours) and more precise calculation of P. rubescens biomass than estimates derived from IVL. Our analysis shows that vertically integrated water samples provide unreliable information on the concentration of P. rubescens in the upper surface waters and on the peak concentration of P. rubescens within the water column. We conclude that the protocol that we developed is superior to the current monitoring practice.

Several studies evaluated the feasibility of using residues to compose asphalt mixtures. However, the demand for treatments are often neglected in determining the environmental impacts. This study ...