• Energy Research
• Closed Access close
• Restricted close
• AU close
• GB close
• BE close
• Transport Research close

The private motor vehicles are significantly important means of transportation in modern lifestyle, however, these also contribute to a large proportion of the total air pollution and primary energy consumption. In order to develop green transportation system, it becomes imperative to use integrated technologies to achieve reduced emissions and utilize renewable energy. Electric vehicles (EVs) have been considered as one of these technologies to transform the traditional vehicle mix. However, the uptake of EV has been debated on factors like cost, performance (autonomous mileage), charging point infrastructure construction, energy saving, policy and end users’ adaptation. Present study investigates the technology feasibility (which usually refer to EVs’ cost, EV charging, supplier’s customer services quality, EV travel performance) and users’ adaptation of EV in Beijing, which is a key driver for the EV uptake into the Beijing transportation system. The relevant data have been collected and analyzed in the form of questionnaire survey around all of these factors. While considering the user perception and satisfaction, safety of charging and energy bills have also been investigated. According to the data analysis, it has been found the policy of ‘No traffic restrictions for EVs’ (the traffic restrictions means for certain date, from Monday to Friday the motor vehicles with the last register number of 1 and 6, 2 and 7, 3 and 8, 4 and 9, 5 and 0, are restricted to travel, respectively), the availability of the charging infrastructure and technical support are the most significant factors affecting the users’ opinions on using EVs.

Plug-in electric vehicles can potentially emit substantially lower CO2 emissions than internal combustion engine vehicles, and so have the potential to reduce transport emissions without curtailing personal car use. Assessing the potential uptake of these new categories of vehicles requires an understanding of likely consumer responses. Previous in-depth explorations of appraisals and evaluations of electric vehicles have tended to focus on ‘early adopters’, who may not represent mainstream consumers. This paper reports a qualitative analysis of responses to electric cars, based on semi-structured interviews conducted with 40 UK non-commercial drivers (20 males, 20 females; age 24–70 years) at the end of a seven-day period of using a battery electric car (20 participants) or a plug-in hybrid car (20 participants). Six core categories of response were identified: (1) cost minimisation; (2) vehicle confidence; (3) vehicle adaptation demands; (4) environmental beliefs; (5) impression management; and, underpinning all other categories, (6) the perception of electric cars generally as ‘work in progress’ products. Results highlight potential barriers to the uptake of current-generation (2010) plug-in electric cars by mainstream consumers. These include the prioritization of personal mobility needs over environmental benefits, concerns over the social desirability of electric vehicle use, and the expectation that rapid technological and infrastructural developments will make current models obsolete. Implications for the potential uptake of future electric vehicles are discussed.

Abstract This paper presents a study of the combined influence of battery models and sizing strategy for hybrid and battery-based electric vehicles. In particular, the aim is to find the number of battery (and supercapacitor) cells to propel a light vehicle to run two different standard driving cycles. Three equivalent circuit models are considered to simulate the battery electrical performance: linear static, non-linear static and non-linear with first-order dynamics. When dimensioning a battery-based vehicle, less complex models may lead to a solution with more battery cells and higher costs. Despite the same tendency, when a hybrid vehicle is taken into account, the influence of the battery models is dependent on the sizing strategy. In this work, two sizing strategies are evaluated: dynamic programming and filter-based. For the latter, the complexity of the battery model has a clear influence on the result of the sizing problem. On the other hand, a modest influence is observed when a dynamic programming strategy is followed.

Abstract This paper describes a new approach to estimate accurately the battery residual capacity (BRC) of the nickel–metal hydride (Ni–MH) battery for modern electric vehicles (EVs). The key to this approach is to model the Ni–MH battery in EVs by using the adaptive neuro-fuzzy inference system (ANFIS) with newly defined inputs and output. The inputs are the temperature and the discharged capacity distribution describing the discharge current profile, while the output is the state of available capacity (SOAC) representing the BRC. The estimated SOAC from ANFIS model and the measured SOAC from experiments are compared, and the results confirm that the proposed approach can provide an accurate estimation of the SOAC under variable discharge currents.

Abstract This study developed a geographical information system-based methodology to maximize the environmental and economic efficiency of large-scale energy plants using different types of biomass. As a precursor to the optimization modelling, multi-criteria spatial analyses and then transport cost optimization are applied taking into account spatial biomass availability and existing road networks, in order to identify optimal biomass energy plant sites for different combinations of biomass types. A geographical information system integrated with a capacitated maximal covering location problem model was employed to assign biomass supply points to biomass energy plants. Capacity limits of the plants and a defined maximum transportation distance were taken into consideration. The resulting information was used to examine major challenges in establishing a large-scale biomass energy plant, biomass supply logistics, environment cost and anticipated traffic congestion. A sensitivity analysis was also carried out to review the influence of plant capacity and maximum transportation distance on economic and environmental sustainability. The proposed methodology was employed utilizing agricultural and forest residues for bioelectricity generation in Queensland, Australia. It was found that 100% bagasse had the highest eco-efficiency for bioelectricity generation from multiple biomass combinations. In contrast, the combination of 70% sawmill residues and 30% forest harvest residues showed the lowest level of traffic congestion (2 trucks per hour). In addition, the impact of traffic congestion of bulky sugarcane residues can be reduced by adding forest residues to the biomass supply. The advantages of the resulting solution are further enhanced when social impacts such as energy security, new income opportunities and job creation are taken into account in addition to the sustainability aspects.

In Bangladesh, prawn (Macrobrachium rosenbergii) farming remains dependent on the capture of wild postlarvae as hatchery production is still inadequate. However, prawn postlarvae fishing has been accompanied by concerns over recent climate change. Different climatic variables including cyclone, salinity, sea level rise, water temperature, flood, rainfall, and drought have had adverse effects on coastal ecosystem, thus determining a decline in the availability of prawn postlarvae and thereby catch. The households of postlarvae fishers also face a variety of socioeconomic constraints due to climate change. Considering extreme vulnerability to the effects of climate change, an integrated approach needs to be introduced to cope with the challenges.

Available methods for measuring the impact of ocean acidification (OA) and leakage from carbon capture and storage (CCS) on marine sedimentary pH profiles are unsuitable for replicated experimental setups. To overcome this issue, a novel optical sensor application is presented, using off-the-shelf optode technology (MOPP). The application is validated using microprofiling, during a CCS leakage experiment, where the impact and recovery from a high CO2 plume was investigated in two types of natural marine sediment. MOPP offered user-friendliness, speed of data acquisition, robustness to sediment type, and large sediment depth range. This ensemble of characteristics overcomes many of the challenges found with other pH measuring methods, in OA and CCS research. The impact varied greatly between sediment types, depending on baseline pH variability and sediment permeability. Sedimentary pH profile recovery was quick, with profiles close to control conditions 24 h after the cessation of the leak. However, variability of pH within the finer sediment was still apparent 4 days into the recovery phase. Habitat characteristics need therefore to be considered, to truly disentangle high CO2 perturbation impacts on benthic systems. Impacts on natural communities depend not only on the pH gradient caused by perturbation, but also on other processes that outlive the perturbation, adding complexity to recovery.

The envisaged de-carbonization of power systems poses unprecedented challenges enhancing the potential of flexible demand. However, the incorporation of the latter in system planning has yet to be comprehensively investigated. This paper proposes a novel planning model that allows co-optimizing the investment and operating costs of conventional generation assets and demand flexibility, in the form of smart-charging/discharging electric vehicles (EV). The model includes a detailed representation of EV operational constraints along with the generation technical characteristics, and accounts for the costs required to enable demand flexibility. Computational tractability is achieved through clustering generation units and EV, which allows massively reducing the number of decision variables and constraints, and avoiding non-linearities. Case studies in the context of the U.K. demonstrate the economic value of EV flexibility in reducing peak demand levels and absorbing wind generation variability, and the dependence of this value on the required enabling cost and users’ traveling patterns.