• Energy Research
• 13. Climate action close
• 12. Responsible consumption close
• AT close
• TH close
• Transport Research close

Three data files are provided for Case Study 1 in the openENTRANCE project: Full_potential.V9.csv, metaData.Full_Potential.csv, and acheivable_NUTS2_summary.csv. The data covers 10 residential devices on the NUTS2 level for the EU27 + UK +TR + NO + CH from 2020-2050. The devices included are storage heater, water heater with storage capabilitites, air conditiong, heat circulation pump, air-to-air heat pump, refreigeration (includes refrigerators and freezers), dish washer, washing machine, and tumble drier. Full_potential.V9.csv shows the NUTS2 level unadjusted loads for residential storage heater, water heater, air conditiong, circulation pump, air-to-air heat pump, refreigeration (includes refrigerators and freezers), dish washer, washing machine, and tumble drier using representative hours from 2020-2050. The loads provided here have not been adjusted with the direct load participation rates (see paper for more details). More details on the dataset can be found in the metaData.Full_Potential.csv file. The acheivable_NUTS2_summary.csv shows the NUTS2 level acheivable direct load control potentials for the average hour in the respective year (years - 2020, 2022,2030,2040, 2050).

Project: GCOS Earth Heat Inventory - A study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory (EHI), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period from 1960 to present. Summary: The file “GCOS_EHI_1960-2020_Earth_Heat_Inventory_Ocean_Heat_Content_data.nc” contains a consistent long-term Earth system heat inventory over the period 1960-2020. Human-induced atmospheric composition changes cause a radiative imbalance at the top-of-atmosphere which is driving global warming. Understanding the heat gain of the Earth system from this accumulated heat – and particularly how much and where the heat is distributed in the Earth system - is fundamental to understanding how this affects warming oceans, atmosphere and land, rising temperatures and sea level, and loss of grounded and floating ice, which are fundamental concerns for society. This dataset is based on a study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory published in von Schuckmann et al. (2020), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period 1960-2020. The dataset also contains estimates for global ocean heat content over 1960-2020 for different depth layers, i.e., 0-300m, 0-700m, 700-2000m, 0-2000m, 2000-bottom, which are described in von Schuckmann et al. (2022). This version includes an update of heat storage of global ocean heat content, where one additional product (Li et al., 2022) had been included to the initial estimate. The Earth heat inventory had been updated accordingly, considering also the update for continental heat content (Cuesta-Valero et al., 2023).

Dynamics of societal material stocks such as buildings and infrastructures and their spatial patterns drive surging resource use and emissions. Building up and maintaining stocks requires large amounts of resources; currently stock-building materials amount to almost 60% of all materials used by humanity. Buildings, infrastructures and machinery shape social practices of production and consumption, thereby creating path dependencies for future resource use. They constitute the physical basis of the spatial organization of most socio-economic activities, for example as mobility networks, urbanization and settlement patterns and various other infrastructures. This dataset features a detailed map of material stocks for the whole of Germany on a 10m grid based on high resolution Earth Observation data (Sentinel-1 + Sentinel-2), crowd-sourced geodata (OSM) and material intensity factors. Temporal extent The map is representative for ca. 2018. Data format Per federal state, the data come in tiles of 30x30km (see shapefile). The projection is EPSG:3035. The images are compressed GeoTiff files (*.tif). There is a mosaic in GDAL Virtual format (*.vrt), which can readily be opened in most Geographic Information Systems. The dataset features area and mass for different street types area and mass for different rail types area and mass for other infrastructure area, volume and mass for different building types Masses are reported as total values, and per material category. Units area in m² height in m volume in m³ mass in t for infrastructure and buildings Further information For further information, please see the publication or contact Helmut Haberl (helmut.haberl@boku.ac.at). A web-visualization of this dataset is available here. Visit our website to learn more about our project MAT_STOCKS - Understanding the Role of Material Stock Patterns for the Transformation to a Sustainable Society. Publication Haberl, H., Wiedenhofer, D., Schug, F., Frantz, D., Virág, D., Plutzar, C., Gruhler, K., Lederer, J., Schiller, G. , Fishman, T., Lanau, M., Gattringer, A., Kemper, T., Liu, G., Tanikawa, H., van der Linden, S., Hostert, P. (accepted): High-resolution maps of material stocks in buildings and infrastructures in Austria and Germany. Environmental Science & Technology Funding This research was primarly funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (MAT_STOCKS, grant agreement No 741950). ML and GL acknowledge funding by the Independent Research Fund Denmark (CityWeight, 6111-00555B), ML thanks the Engineering and Physical Sciences Research Council (EPSRC; project Multi-Scale, Circular Economic Potential of Non-Residential Building Scale, EP/S029273/1), JL acknowledges funding by the Vienna Science and Technology Fund (WWTF), project ESR17-067, TF acknowledges the Israel Science Foundation grant no. 2706/19.

Abstract Background Personal transportation in urban areas is characterised by different transportation technologies with significantly varying properties regarding usability, infrastructural requirements and environmental impacts. This characterisation motivates the objective evaluation of mobility solutions, based on different criteria. State of the art evaluations in the scientific literature mainly focus on one specific criterion at a time. The most common criteria investigated are found in energy demand or equivalent fuel consumption. Other parameters include the traffic space demand or mean velocity as a reference for the user-related criterion “travel time”. Since different modes of transport show various potentials in different criteria, an interesting point for scientific research is consideration of the different criteria in a more comprehensive evaluation approach. To address this issue, the aim of this study is to present a new approach for an objective evaluation and comparison of different transport technologies under consideration of pre-defined range of criteria and defined boundary conditions and requirements for personal mobility in cities. Besides technical-oriented aspects like driving range, transport capability and life cycle-related consumption of resources, additional factors influencing user-behaviour and traffic density are reflected. The evaluation method is presented, based on a generated exemplary data collection regarding technical and in-use characteristics of different modes of transport, mainly investigated in the city of Graz, Austria. Methods The study focuses on different means of transport, in particular walking, bicycling, the use of powered two-wheelers, passenger cars with different propulsion systems and public transport systems. It is based on the determination of selected criteria, considering ecologic, infrastructural and user-related aspects. With respect to ecologic criteria, the study considers resources and energy consumption as also the resulting CO2 equivalent emissions. The mean velocity and transport capacity are considered in the context of user-related criteria. Traffic space demand is an important and limited resource, especially in urban areas. The present study thus includes the determination and comparison of the relative traffic and parking space demands for the different modes of transport. The evaluation is based on a specifically developed evaluation methodology, considering weighted traffic performance indices, which are also proposed and discussed. Results Within the present study, a database providing specific mobility-related criteria and parameters has been generated, representing technical characteristics and the effects of the use of different vehicles and means of transportation in urban areas. The illustrated results allow an objective evaluation of a broad range of different means of transportation and vehicles, based on introduced “weighted traffic performance indices” (WTPI). Conclusions The study contributes to a discussion of transportation technologies and allows a derivation of measures for further research topics to face future intra-urban mobility demands. This represents a basis for decision making on the priorisation of the most suitable transport systems for urban areas. It is shown that the motorised individual passenger transport as dominated by the use of private passenger cars in particular represents today the most inefficient form of inner-urban mobility.

AbstractMetro systems act as fast and efficient transport systems for many modern metropolises; however, enhancing higher usage of such systems often conflicts with providing suitable accessibility options. The traditional approach of metro accessibility studies seems to be an ineffective measure to gage sustainable access in which the equal rights of all users are taken into account. Bangkok Metropolitan Region (BMR) transportation has increasingly relied on the role of two mass rapid transport systems publicly called “BTS Skytrain” and “MRT Subway”, due to limited availability of land and massive road congestion; however, access to such transit arguably treats some vulnerable groups, especially women, the elderly and disabled people unfairly. This study constructs a multi-dimensional assessment of accessibility considerations to scrutinize how user groups access metro services based on BMR empirical case. 600 individual passengers at various stations were asked to rate the questionnaire that simultaneously considers accessibility aspects of spatial, feeder connectivity, temporal, comfort/safety, psychosocial and other dimensions. It was interestingly found by user disaggregated accessibility model that the lower the accessibility perceptions—related uncomfortable and unsafe environment conditions, the greater the equitable access to services, as illustrated by MRT — Hua Lumphong and MRT — Petchaburi stations. The study suggests that, to balance the access priorities of groups on services, policy actions should emphasize acceptably safe access for individuals, cost efficient feeder services connecting the metro lines, socioeconomic influences and time allocation. Insightful discussions on integrated approach balancing different dimensions of accessibility and recommendations would contribute to accessibility-based knowledge and potential propensity to use the public transits towards transport sustainability.

Sea level rise due to climate change affects beaches, which are a source of high recreational value in the economy. The tourism carrying capacity (TCC) assessment is one of the tools to determine the management capacity of a beach. Pattaya beach represents the character of well-known beaches in Thailand, while Chalatat beach represents the character of beaches that are the focus of domestic tourism. To evaluate beach area this study detected the shoreline position using Google Earth images with tidal correction. The Bruun rule was used for shoreline projection. TCC was calculated by using the beach area, correction factors, and management capacity. The results find that the current effective carrying capacity is approximately 200,000 for Pattaya beach and 49,000 for Chalatat beach. Although the Chalatat beach areas are larger than Pattaya, the effective carrying capacity of Pattaya beach is larger than the effective carrying capacity of Chalatat beach for all situations because TCC is affected by beach areas, correction factors, and management capacity. Because beach areas experience the effects of sea-level rise, protection against future beach loss should be considered for coastal management.

Transport can play a key role in mitigating climate change, through reducing traffic, emissions and dependency on private vehicles. Transport is also crucial to connect remote areas to central or urban areas. Yet, sustainable and flexible transport is among the greatest challenges for rural areas and rural–urban regions. Innovative transport concepts and approaches are urgently needed to foster sustainable and integrated regional development. This article addresses challenges of sustainability, accessibility, and connectivity through examining complementary systems to existing public transport, including demand-responsive transport and multimodal mobility. We draw upon case studies from the Metropolitan Area of Styria, Ljubljana Urban Region and rural Wales (GUSTmobil, REGIOtim, EURBAN, Bicikelj, Bwcabus, Grass Routes). In-depth analysis through a mixed-methods case study design captures the complexity behind these chosen examples, which form a basis for analysing the effects of services on accessibility for different groups, connectivity to public transport and usability as a “first and last mile” feeder. We further explore the weaknesses of complementary transport systems, including legal, organisational and financial barriers, and offer potential solutions to structure and communicate complementary transport systems to improve access and use. Looking ahead, we use the case studies to anticipate innovative, sustainable “mobility as a service” (MaaS) solutions within and between urban and rural areas and consider how future public policy orientations and arrangements can enable positive change. A main concern of our article and the contribution to scientific literature is through exploring the benefit of well-established multi-level governance arrangements when introducing smaller-scale mobility solutions to improve rural–urban accessibility. It becomes clear that not a one-size-fits-all model but placed-based and tailored approaches lead to successful and sustainable concepts.

Background: The correct design of electric vehicle (EV) charging infrastructures is of fundamental importance to maximize the benefits for users and infrastructure managers. In addition, the analysis and management of recharges can help evaluate integration with auxiliary systems, such as renewable energy resources and storage systems. EV charging data analysis can highlight informative behaviours and patterns for charging infrastructure planning and management. Methods: We present the analysis of two datasets about the recorded energy and duration required to charge EVs in the cities of Barcelona (Spain) and Turku (Finland). In particular, we investigated hourly, daily and seasonal patterns in charge duration and energy delivered. Simulated scenarios for the power request at charging stations (CSs) were obtained using statistical parameters of the Barcelona dataset and non-parametric distributions of the arrivals. Monte Carlo simulations were used to test different scenarios of users’ influx at the CSs, and determine the optimal size of an integrated renewable energy system (RES). Results: This study highlighted the difference between fast and slow charging users’ habits by analysing the occupancy at the charging stations. Aside from the charge duration, which was shorter for fast charges, distinct features emerged in the hourly distribution of the requests depending on whether slow or fast charges are considered. The distributions were different in the two analysed datasets. The investigation of CS power fluxes showed that results for the investment on a RES could substantially vary when considering synthetic input load profiles obtained with different approaches. The influence of incentives on the initial RES cost were investigated. Conclusions: The novelty of this work lies in testing the impact of different approach to design synthetic profiles in the determination of the optimal size of a photovoltaic (PV) system installed at a charging infrastructure, using the economic criterion of the net present value (NPV).