• Energy Research
• 13. Climate action close
• 12. Responsible consumption close
• 8. Economic growth close
• UA close
• Transport Research close

Purpose. In modern conditions of energy consumption growth and a rapid increase in energy prices the actual problem is the development and implementation of energy efficiency programs and resource-saving conversion in to a source to provide the needs of industry and municipal power. The paper aims to solve the urgent problem of energy saving and efficient use of fuel-energy ones and heat supply system optimization on the basis of Uman National University of Horticulture (UNUH). Methodology. The work investigated the process of heating and hot water supply in the course of 2007-2015 years. Implementation of current problems of energy saving is grounded on the scientific-practical and efficient assurance of fuel and energy usage. At the same time energy-saving technologies are viewed as a priority direction of the energy sector development, reduction of man-induced impact on the environment and as a way of improving the competitiveness of the national economy. Findings. Statistical data acquisition and analyzing of gas flow and outside air temperature for nine years was carried out. On the basis of this analysis, the problem was identified and specific targets for its solutions were set. Originality. Scientific novelty lies in solving the problem of energy saving and efficient use of fuel resources in Ukraine through the use of a systematic approach, the methodology development of efficient use of different fuels and optimization of local heating operation, applying contemporary automation and control systems. Firstly it was in detail analyzed and conducted the comprehensive assessment of various factors influence on energy conservation. It takes into account the human factor, professionalism and responsibility of the operators of boilers and their superiors, as well as the relevant control services. Practical value. For UNUH campus hybrid use of solid fuel and gas boilers was carried out. Decentralization of the university heating system has been conducted through the restoration of 350 individual heating systems in residential buildings, remote departments and campus dormitories. The conclusions propose the list of activities upon the real economy of fuel and energy resources, and measures to overcome the economic and political crisis in the country.

The paper represents the analysis, which has helped to establish the usage of gas hydrate technologies in the methane conversion. This gas could be obtained in different ways. Possibilities and sources for the gas obtaining have been demonstrated. Use of other environmentally friendly sources to support operation in such systems in terms of joint energy complex has been considered. The necessary kinetic connections to provide operational sustainability of all the constituents have been given. The approach helps evaluate quantitatively the priority of its physicochemical transformations to obtain gas hydrates artificially. It is possible to transport methane at considerable distances when it is solidified. Actually, in this case there is no necessity to build costly compressor stations and pipelines for its transportation to consumers. The approach is extremely important for mining regions as it helps prolong the operating period and working out of the abandoned and off-balance coal reserves. In this case, it is proposed to apply special gasification technologies tending to maximum methane recovery. The proposed solutions give the possibility to define the trends of our further research. They will be highlighted in the following authors’ studies.

The article explores the problem of changing the worldview of mankind and the transition to the concept of sustainable development, which requires harmonization of the economic, environmental and social component to ensure the life of modern generations without prejudice to future ones. The conditions for the emergence of the concept of sustainable development and the progress of countries in achieving it using the index of achieving sustainable development goals are studied. A significant role in the process of studying the goals of sustainable development is given to ecologization of all life spheres, including the economy. The place of ecologization in the goals and objectives of sustainable development is determined, the interpretation of ecologization and the evolution of this concept are analyzed. The ecologization of economy has passed certain stages in its development and has led to the emergence of a new direction of science and practical activity − the ecological economy, which was formed at the intersection of economics and ecology. The main task of the ecological economy is to reduce the eco-destructive impact on the environment from human economic activity. Ecological economy adheres to the goals and objectives of sustainable development and is an integral part of a sustainable economy, reflecting its environmental aspect. Determination of the country's subsidiaries in ecologization of the economy is carried out using the green economy index, which reflects the degree of ecologization in various fields and has something in common with the index of achieving sustainable development goals. A comparative analysis of the indices of sustainable development and the green economy index, their values for Ukraine. The composition of the ecological (green) economy includes other ecologicallyoriented types of economy, each of which studies a certain direction of ecologization and reducing the eco-destructive impact on the environment. With the development of ecological thinking and a change in the worldview of mankind, the number of environmentally-oriented types of economy will increase as the number of scientific studies on environmental issues increases, which, in turn, will achieve the goals of sustainable development

Purpose. The scientific work aims to develop a new method for assessing the level of chemical air pollution in working zones located in open areas near highways using screens of different heights. Methodology. The analytical method for calculating the airflow velocity field near protective screens is based on the mathematical apparatus of the theory of complex variable functions, which allows obtaining the value of the velocity potential and the flow function, to calculate the velocity value at any point of the plane with a screen of different height. The obtained velocity field is used to calculate the level of carbon monoxide concentration in the numerical solution of the two-dimensional mass transfer equation. Findings. The developed program of numerical calculation allows conducting computational experiments on the effectiveness of the use of protective screens, taking into account changes in their geometry and meteorological conditions. The developed method based on the obtained concentration field makes it possible to carry out an assessment of the risk of chronic intoxication for the employees of the take-out trade, who are within the zone of the emission source (highway) for a long time. Originality. The regularities of changes in the concentration of carbon monoxide are established depending on the distance to the emission source at a height of 2 m from the ground in the presence of a screen of a certain height and in its absence. A risk assessment of chronic carbon monoxide intoxication has been carried out for take-out trade workers near the highway. It is shown that the presence of the screen reduces the risk of chronic CO intoxication by 10% as compared to its absence. Increasing the screen height to 1.8 m reduces the risk of chronic intoxication by 6% relatively to the situation when the screen height is 1.2 m. Practical value. The developed numerical-analytical method for calculating the level of chemical pollution in working zones in open areas and the program «Screen» created on its basis allow us to carry out a prompt forecast of atmospheric air pollution level with carbon monoxide taking into account the effectiveness of the screens. Quantitative results are necessary at the planning stage of trading places near highways, during the architectural-planned reorganization of adjacent developments.

Automobile industry is one of the most developed industries in Ukraine and in the world today. The ever-increasing demand for transportation leads to an increase in demand for fuel, which in turn increases its deficit and value. Therefore, the high cost of traditional hydrocarbon fuels and the constant reduction of their world reserves compels scientists to find renewable biofuels. The objective of this paper is to present results of a study aimed at investigating the possibility of using alternative fuels derived from the alcohol industry waste, in pure form and as additives to hydrocarbon fuels. According to the results, the main technical and operational properties of alternative fuels received on the basis of A-92 petrol and fusel oils, experimental values of density, viscosity, distillation temperature on the ENGLER machine, temperature of formation steam congestion, their optimal percentages in the mix for different types were obtained in internal combustion engines. The findings of the research also indicate that an addition of fusel oils to A-92 gasoline leads to improvement of the viscosity-temperature characteristics of formed mixtures and increase in the temperature of formation steam cork, which ultimately reduces the consumption of fuels by 10-12% and also contributes to solving the problem of recycling fusel oils.

Problem. Development and implementation of green technologies is both an urgent and a cost-effective scientific and engineering task. Therefore, the issues related to the study of renewable energy sources, which are used as the main sources of energy for electric vehicles, are quite relevant and promising. At the same time, an equally important question is how profitable is building solar charging stations in terms of both ecology and economy. Goal. The aim is calculation and analysis of technical and economic indicators of a solar charging station for electric vehicles (EV). Methodology. The analytical methods of studying the development and application of the ways and devices to transform the energy of the sun into electricity are used, as well as the methods of experimental research and mathematical methods of processing and modulation of the received results; methods of calculating technical and economic indicators. Results. The review of the literature on the development of renewable energy sources, in particular, solar power plants, and the spread of electric vehicles with the gradual displacement (replacement) of traditional cars working on internal combustion engines with electric vehicles (BEV and PHEV) was made. The main parameters and technical characteristics of the solar-powered charging station (SPCS) were studied. For the analysis and calculation of technical and economic indicators of SPCS for EV it is offered to take a SPP with a capacity of 20 kW as a basis. The calculation of SPCS electricity generation both for own consumption and for power supply of EV and the sale of surplus electricity to the general network at the “green tariff” was carried out. Originality. The technical and economic calculation of SCS was made taking into account the rise of electricity prices in Kharkiv region (Ukraine). Practical value. According to the analysis of the obtained results, it can be said that the payback period of SPCS for EV is about 7.9 years. If we consider the constant increase in the cost of electricity (approximately 15% per year), we can expect the payback after 6.8 years of operation.

The purpose of this paper is to present the results of an investigation as to the interconnection between main exterior factors which can influence the power consumption during the vehicle movement in the conditions of real operation. According to the results of theoretic researches, there was determined an influence of every factor on the power consumption during vehicle movement in the modes typical for Lutsk city. There was established a contribution of the factors into the total power consumption on micro and macro levels. As a result of the study it was evaluated that an influence of a driver on a power consumption is situated within 50…80 %, an influence of an air resistance is up to 10 %, an influence of a longitudinal profile and a road resistance varies within 20…35 %. According to the results of experiments, there were determined the bus driving modes in urban conditions, and according to their results, there was built an average graph of bus movement in Lutsk city. There was made a mathematic modelling of electric vehicle movement, along with that there was taken into account the most probable range of change of the exterior factors, namely vehicle acceleration, road resistance, air resistance. It was proved that while speed is growing, the influence of road resistance and of air resistance is growing up and has a parabolic character, along with that the contribution of a driver is decreasing. The contribution of the study consists in that, There were proposed the coefficients of taking into consideration the influence of exterior factors on the power consumption by the vehicle and there was built a mathematic model for their determination. These coefficients of taking into consideration the influence of exterior factors on the power consumption give a possibility to evaluate the critical influences and to make an operative decision about the minimization of power consumption as for some specific vehicles, and for an enterprise. Further researches will focus on the plotting of telemetric means of informing, in a mode of real time, of the drivers of the vehicles, of the controllers of an enterprise about the exterior influences, that will give a possibility to make the appropriative decisions instantly. Besides, the given results can be used in order to determine the level of qualification of a driver, the state of road pavement, will give a possibility to find some more rational layout of bus stops, traffic lights, to optimize the routes of vehicles movement.

The results of the research work on biofuel’s impact on the environmental and economic performance of marine diesel engines are presented. During the research, a fuel mixture was used that consisted of the diesel fuel RMA10 and FAME biofuel. The objective of the research was to determine the optimal concentration of biofuel mixed with diesel fuel. The research work was carried out on three of the same type of marine medium-speed diesel engine, 6N165LW Yanmar. One of the diesel engines only operated on diesel fuel, and the other two operated on a mixture of diesel fuel and 5–20% biofuel. During the experiment, the diesel engines operated at a load of 50–80% of the rated value. Experimentally, it was found that using biofuel improved the environmental friendliness of diesel engines: the emission of nitrogen oxides in exhaust gases was reduced by 8.7–23.4%, and the emission of carbon oxides in exhaust gases was reduced by 3.1–24%. However, when using biofuel, the economic efficiency of diesel operation decreased as the specific effective fuel consumption increased by 0.5–9.3%. The highest environmental efficiency was achieved when using a fuel mixture that included 10–15% biofuel in an 80% diesel load. In this case, the emission of nitrogen oxides was reduced by 21–23.5%, the emission of carbon oxides was reduced by 16.5–19.2%, and the magnification of the specific useful consumption of the diesel engine was 1–1.55%.