• Energy Research
• natural sciences close
• EG close
• Energy Research close

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

The environmental control and management of municipal solid waste (MSW) dumping sites is considered one of the sensitive challenges faced by executive municipalities. This is especially true in Makkah due to the gradual increase in urban population and visitors, with an overall MSW generation of about one million tons per year. Consequently, the geo-environmental evaluation of the Kaakia dumping site shed light on the potential environmental threats, in terms of ambient air quality levels and meteorological parameters, in addition to geophysical inspection. An air quality survey discussed the major trends of ambient air pollutants (SO2, NO2, CO, O3, CH4, and PM10) downwind from the Kaakia dumping site. It indicated the presence of a significant increase in sporadic plumes of Methane concentration. The maximum hourly averages ranged between 22.9–26.6 µg/m3 for SO2, 44.4–64.0 µg/m3 for NO2, 0.86–1.38 mg/m3 for CO, 150.2–158.8 µg/m3 for O3, 5.09–5.9 ppm for CH4, and 955–994 µg/m3 for PM10. The ground penetrating radar (GPR) geophysical survey indicated the subsurface sequence of three geological layers, as confirmed by nearby bores of the investigated site: (1) a surface layer formed of alluvial sediments of sand, which were 2.5–3.1 m thick; (2) a second layer represented by sand and gravel, with a thickness of 4.6–6.5 m; and (3) a third layer equivalent to saturated alluvial sediments mixed with rock fragments that extended to a depth of 13 m. The signals of the GPR were attenuated at the base of the conducted profiles due to the percolation of generated leachate to the subsurface sequence and contaminated groundwater aquifer.

Abstract Simultaneous production of 3-biofuels (hydrogen, ethanol and methane) as by-products of the biodegradation of petrochemical wastewater containing MEG via anaerobic packed bed baffled reactor (AnPBBR), was extensively investigated. A four-chambered reactor supported by polyurethane sheets, was operated at a constant hydraulic retention time (HRT) of 36 h and different organic loading rates (OLRs) of 0.67, 1, 2 and 4 gCOD/L/d. The maximum specific H 2 and CH 4 production rates of 438.07 ± 43.02 and 237.80 ± 21.67 ml/L/d were respectively achieved at OLR of 4 gCOD/L/d. The residual bio-ethanol significantly increased from 57.15 ± 2.31 to 240.19 ± 34.69 mg/L at increasing the OLR from 0.67 to 4 gCOD/L/d, respectively. The maximum MEG biodegradability of 98% was attained at the lowest OLR. Compartment-wise profiles revealed that the maximum H 2 and ethanol production were achieved at HRT of 9 h (1st compartment), while the CH 4 production was peaked at HRTs of 27 and 36 h (last two compartments). Kinetic studies using Stover–Kincannon and completely stirred tank reactor (CSTR) in series models were successfully applied to the AnPBBR overall and compartment-to-compartment performance, respectively. The economic evaluation strongly revealed the potentials of using AnPBBR for simultaneous treatment and bio-energy production from petrochemical wastewater as compared to the classical anaerobic baffled reactor (ABR). Microbial analysis using Illumina MiSeq sequencing showed a diversity of bacterial community in AnPBBR. Proteobacteria (36.62%), Firmicutes (20.85%) and Bacteroidetes (3.44%) were the most dominant phyla.

Abstract Many organizations in the world are interested in waste management problems and their potential solutions. In order to solve these problems, a Japanese venture company has developed an innovative thermal decomposer for organic wastes called ERCM (Earth-Resource-Ceramic-Machine). The ERCM reactor employs electron injected air to promote the thermal decomposition reaction, while the effect of electron injection into air has not yet been clarified. An experimental work was performed using a fixed bed reactor to explore the effects of different parameters of electron injection into air, the reaction temperature and different feedstock on the syngas generation. The main purpose of this study is to clarify the phenomena occurring in the ERCM reactor where a direct current electric field is produced in the flame reaction zone to enhance the thermal decomposition of wastes. In this regard, a mathematical model for simulating the thermal decomposition of solid waste in the presence of an electric field have been developed. The equations of aero-thermochemistry are coupled to the balance equations for densities of charged species, and the Poisson equation for the electrical potential is solved. The model was validated by the experimental data and showed a good agreement. The results showed that the electric field significantly improves the stabilization of the flame. From the release behavior of CO and CO2, it is noted that the electron injection would affect the char combustion process significantly. Finally the effect of the flame reaction zone generated by the field induced ion wind on the thermal decomposition was investigated.

Abstract Pure and antimony-incorporated TiO2 thin films were prepared using a spray-CVD method. The method allows for convenient incorporation of foreign atoms into the oxide matrix during film growth. The foreign atoms in the oxide film affects both the photovoltaic and photoelectrochemical properties of the n-Si/oxide heterojunction. The characteristics of the prepared oxide films were affected significantly by the presence of antimony on the oxide matrix. The increased conductivity of the Sb-containing oxide layers is reflected in the improved photovoltaic properties of the prepared n-Si/TiO2-Sb heterojunctions, e.g. fill factor and solar conversion efficiency. The photoelectrochemical properties of the prepared devices revealed that the charge transfer step at the oxide/electrolyte interface leads to a deterioration of the cell quality. However, this drawback has been offset by the improved properties of the heterojunction.

Recent years have seen a rise in the frequency and severity of extreme rainstorm events, which have caused widespread damage and death in numerous cities. The manufacture and use of storm drainage materials result in numerous environmental concerns in the construction industry. Green materials for storm drainage networks are environmentally friendly compared to their traditional counterparts. Identifying and assessing sustainability criteria for green materials for storm drain networks has been challenging. This study aims to determine the critical criteria for selecting green materials for storm drainage networks using a stationary analysis approach. To this end, a questionnaire survey was administered to Egyptian storm engineers to assess their importance based on a selection criteria 29 green materials. From the results obtained, “Operation and maintenance cost” and “Use of local material” were seen to be the “stationary materials”. The obtained findings in this research pave the way for the Egyptian storm industry towards becoming environmentally friendly, which will in turn improve the functioning mechanism of sewer networks.

Agro-wastes, such as crop residues, leaf litter, and sawdust, are major contributors to global greenhouse gas emissions, and consequently a major concern for climate change. Nowadays, mushroom cultivation has appeared as an emerging agribusiness that helps in the sustainable management of agro-wastes. However, partial utilization of agro-wastes by mushrooms results in the generation of a significant quantity of spent mushroom substrates (SMS) that have continued to become an environmental problem. In particular, Shiitake (Lentinula edodes Berk.) mushrooms can be grown on different types of agro-wastes and also generate a considerable amount of SMS. Therefore, this study investigates the biotransformation of SMS obtained after Shiitake mushroom cultivation into biogas and attendant utilization of slurry digestate (SD) in tomato (Solanum lycopersicum L.) crop fertilization. Biogas production experiments were conducted anaerobically using four treatments of SMS, i.e., 0% (control), 25, 50, and 75% inoculated with a proportional amount of cow dung (CD) as inoculum. The results on biogas production revealed that SMS 50% treatment yielded the highest biogas volume (8834 mL or 11.93 mL/g of organic carbon) and methane contents (61%) along with maximum reduction of physicochemical and proximate parameters of slurry. Furthermore, the biogas digestate from 50% treatment further helped to increase the seed germination (93.25%), seedling length (9.2 cm), seedling root length (4.19 cm), plant height (53.10 cm), chlorophyll content (3.38 mg/g), total yield (1.86 kg/plant), flavonoids (5.06 mg/g), phenolics (2.78 mg/g), and tannin (3.40 mg/g) contents of tomato significantly (p < 0.05) in the 10% loading rate. The findings of this study suggest sustainable upcycling of SMS inspired by a circular economy approach through synergistic production of bioenergy and secondary fruit crops, which could potentially contribute to minimize the carbon footprints of the mushroom production sector.

Fungal biomass, Aspergillus terricola, was synthesized and employed for the biosorption of aqueous hexavalent chromium via batch technique. Insight into the nature of the surface chemistry and morphology of the fungal biomass was obtained via infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analyses, respectively. Also, the effect of selected process variables on the Aspergillus terricola biosorption capacity was elucidated. By employing isotherm and kinetic of varying parametric equations, the study investigated the effect of the number of parameters in a given model equation on their modelling performance. Marczewki-Jaroniec (4-parameter) and Fractal-like Pseudo-first order (3-parameter) model emerged as the best fit for isotherm and kinetics studies, respectively. The finding demonstrated the dependence of modelling accuracy on the inherent number of parameters of a given model. Meanwhile, the result of the mechanistic studies highlighted the superiority of the film diffusion mechanism during the hexavalent chromium biosorption, with a Langmuir maximum adsorption capacity (q max) of 87.3 mg. g-1. Notably, the biosorption efficacy of Aspergillus terricola biomass was succinctly demonstrated in the study.