• Energy Research
• 2021-2025close
• SA close
• EG close
• Energy Research close

Siderophores are low molecular weight secondary metabolites produced by microorganisms under low iron stress as a specific iron chelator. In the present study, a rhizospheric bacterium was isolated from the rhizosphere of sesame plants from Salem district, Tamil Nadu, India and later identified as Bacillus subtilis LSBS2. It exhibited multiple plant-growth-promoting (PGP) traits such as hydrogen cyanide (HCN), ammonia, and indole acetic acid (IAA), and solubilized phosphate. The chrome azurol sulphonate (CAS) agar plate assay was used to screen the siderophore production of LSBS2 and quantitatively the isolate produced 296 mg/L of siderophores in succinic acid medium. Further characterization of the siderophore revealed that the isolate produced catecholate siderophore bacillibactin. A pot culture experiment was used to explore the effect of LSBS2 and its siderophore in promoting iron absorption and plant growth of Sesamum indicum L. Data from the present study revealed that the multifarious Bacillus sp. LSBS2 could be exploited as a potential bioinoculant for growth and yield improvement in S. indicum.

The energy expended to cool the occupied areas by air conditioners represents a substantial share of the total energy exhausted in buildings. Therefore, developing strategies to reduce this energy is crucial. One of the preponderance strategies adopted to depreciate energy consumption in buildings is the occupancy-based strategy. In this research, an innovative model was established to achieve the goal of reducing cooling energy consumed in buildings based on occupancy-based combined with a constant temperature setpoint strategy in two phases, and each phase engrosses in 20 days. Phase one is to identify the extent of cooling energy employed according to the use of room occupants and its costs in consumption was 276.01 kWh after completion of this phase. Sequentially, constructing phase two intended to reduce cooling energy consumption by employing an automatic air-conditioner (AC) control strategy relying on an improved human detection algorithm with a 25℃ as temperature setpoint, resulting in 112.45 kWh of consumption. To complement the motives for elaboration, the human detection measurement using you only look once (YOLO) improved by applying pre-processing algorithms to reach an average human detection enhancement of 21.2%. The proposed model results showed that potential savings associated with the embraced strategy decreases by more than anticipated as the amount of reduced energy reached 59% savings.

As smart cities become a global topic, interest in smart mobility, the core of smart cities, is also growing. The technology that comes closest to general users is “autonomous driving”. In particular, the successful market entry and establishment of some private companies proved that “autonomous driving” is not technology of the future but imminent reality. However, safety in autonomous vehicles that rely on sensors instead of the driver’s five senses has been the focus of attention from the beginning and continues to be so. In this study, we attempted to counter this interest. Based on the actual data of thirty traffic accidents, assuming the AEBS (Autonomous Emergency Braking System) was installed to assist the driver in safe driving, it was reinterpreted through simulation to see what changes occurred in the accident. In the computer program, PC-Crash, the results were first analyzed through simulation using Euro NCAP (New Car Assessment Program)’s AEBS test standards. Subsequently, the other variables in the AEBS were controlled and the accident was reinterpreted by changing only the angle of the radar detection sensor. As a result, it was confirmed that a total of 27 accidents out of thirty accidents could have been prevented with the AEBS. In addition, it proved that the crash avoidance rate of vehicles gradually increased as the radar angle increased.

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.

Abstract The variation of properties with temperature have many practical applications in the area of chemical engineering and metallurgy, in the process of extrusion, the materials moving between a feed roll and on carrier belt. Here our intention is to explore the consequences of temperature dependent viscosity and variable thermal conductivity on flow of nanoliquid in a rotating system. Fluid between parallel plates is taken. Energy expression incorporates the exponential heat source. This analysis also explores the attributes of modified Arrhenius energy function with chemical reaction. Boundary layer problems have been computed via NDSolve approach. The obtained solutions are sketched for various estimations of embedded variables of interest. Results pointed out that both axial and transverse velocities show decaying behavior for higher rotation parameter. Thermal field boosts up with an enhancement of thermophoretic and space dependent heat source variables. Moreover the rate of mass transport decays through dimensionless activation energy.