• Energy Research
• UA close
• EE close
• Energies close
• Energy Research close

Long term stability is one of the decisive properties of solid oxide fuel cell (SOFC) as well as solid oxide electrolysis cell (SOEC) materials from the commercialization perspective. To improve the understanding about degradation mechanisms solid oxide cells with different electrode compositions should be studied. In this work, Ni-Zr0.92Y0.08O2-δ (Ni-YSZ)| Zr0.92Y0.08O2-δ (YSZ)|Ce0.9Gd0.1O2-δ (GDC)|Pr0.6Sr0.4CoO3-δ (PSC) cells are tested in the SOFC regime for 17,820 h at 650 °C, and in the SOEC regime for 860 h at 800 °C. The SOFC experiment showed a degradation speed of 2.4% per 1000 h at first but decreased to 1.1% per 1000 h later. The electrolysis test was performed for 860 h at 800 °C. The degradation speed was 16.3% per 1000 h. In the end of the stability tests, an electrode activity mapping was carried out using a novel 18O tracing approach. Average Ni grain sizes were measured and correlated with the results of the oxygen isotope maps. Results indicate that Ni coarsening is dependent on solid oxide cell activity. Strontium, chromium and silicon concentrations were also analyzed using the ToF-SIMS method and compared to the electrode activity map, but significant correlation was not observed.

Climate change has brought a compelling need for cooling living spaces to the attention of researchers as well as construction professionals. The problem of overheating enclosures is now exacerbated in traditionally affected areas and is also affecting countries that were previously less prone to the issue. In this paper, we address measurements of thermal comfort and cooling emission efficiency parameters for different devices: ceiling panels, underfloor cooling, fan-assisted radiators, and fan coil. These devices were tested in low and high cooling capacities of up to 40 W/m2 while also featuring heating dummies to imitate internal heat gains. Air temperatures were measured at different heights, allowing to evaluate the thermal stratification with high accuracy. Thermal comfort differences of the tested systems were quantified by measuring both air velocities and operative temperatures at points of occupancy. In summary, the best-performing cooling devices for the studied cooling applications were the ceiling panels and fan radiators, followed by underfloor cooling, with a limitation of stratification. Because of the strong jet, fan coil units did not achieve thermal comfort within the whole occupied zone. The results can be utilized in future studies for cooling emission efficiency and energy consumption analyses of the different cooling devices.

Biomass and renewable resources are becoming substitutes for fossil-based resources, providing opportunities for more sustainable environmental management and reductions in environmental damage. This paper studies the prospects for wood pellet production in Kazakhstan through the lens of business model adjustment in a microenterprise in Kazakhstan. This study focuses on answering the following questions: (1) How do microenterprises propose, create, deliver and capture value through business models in the wood industry? (2) What are the opportunities and challenges relating to these business models in the context of wood pellet production in Kazakhstan? Kazakhstan has a high potential for biomass production, providing a particularly interesting case for analysing how microenterprises can tap into this potential to create value. This paper combines an analysis of bioenergy and forestry trends with a qualitative case study. The analysis of the business model is based on Osterwalder’s business model canvas. The value proposition of the enterprise studied herein is to provide a local biomass-based alternative to fossil fuels. The overall growth of wood-based industries in Kazakhstan and the national movement towards renewable energy create favourable prospects for microenterprises engaged in the production of wood pellets; however, these industries are also characterised by high institutional and regulatory dependencies.

Recent trends in building energy systems such as local renewable energy generation have created a distinct demand for energy storage systems to reduce the influence and dependency on the electric power grid. Under the current market conditions, a range of commercially available residential energy storage systems with batteries has been produced. This paper addresses the area of energy storage systems from multiple directions to provide a broader view on the state-of-the-art developments and trends in the field. Present standards and associated limitations of storage implementation are briefly described, followed by the analysis of parameters and features of commercial battery systems for residential applications. Further, the power electronic converters are reviewed in detail, with the focus on existing and perspective non-isolated solutions. The analysis covers well-known standard topologies, including buck-boost and bridge, as well as emerging solutions based on the unfolding inverter and fractional/partial power converters. Finally, trends and future prospects of the residential battery storage technologies are evaluated.

The uneven load of the electric drive of sucker-rod pumping units causes an increase in the consumption of reactive power, which requires compensation. This article discusses the issue of calculating the processes in sucker-rod pumping units in the case of individual compensation of the reactive power. Mathematical models for calculating the process of changing the capacity of cosine capacitors for reactive power compensation in the starting and steady-state modes of the electric drive of the sucker-rod pumping unit, which are characterized by the periodically varying load and moment of inertia, have been developed. The calculation is based on a mathematical model of the induction motor that takes into account the saturation of the magnetic path and the skin effect in the bars of the deep-bar rotor. The created mathematical model can be used to regulate the capacitance of the capacitors connected to the induction motor in order to reduce the reactive power consumption.

The paper considers the transformation of human resource management processes in the healthcare settings of Ukraine in the context of war and the COVID-19 pandemic. It is noted that the unstable and hostile environment of a healthcare setting during times of crisis leads to the need to change the personnel selection and team formation model to increase the adaptability and resilience of human resources involved in the provision of medical care. The key features of the human resource management process in a turbulent environment are the high migration activity of personnel, which leads to the need to reallocate resources, the need to operate under severe financial constraints, and the need to consider personnel as a non-renewable resource when it is impossible to attract additional resources. To ensure the reliability of the functioning of a medical institution, the transformation of human resource management processes should be based on strategic agility and human resource management, organizational resilience as a resource-based capability, corporate sustainability, and transformation of enterprises’ resources, which can be achieved by applying methodological support for resource management in a multi-project environment. Considering a network of medical institutions as a multi-project environment will allow using the methodology of project-oriented resource management, forming adaptive teams in a multi-project environment, to ensure flexible redistribution of resources both within a single institution and within a network of institutions. It is proposed to use formal transformations to manage a medical institution’s human resources. Applying the proposed approach for managing the human resources of a medical institution is considered. The formation of a project team that satisfies the minimum requirements with the maximum value of the team’s qualification score is considered. It is shown that the use of this methodological support made it possible to choose the composition of the project team with a minimum number and a maximum value of the characteristic.

The ongoing amplification of climate change necessitates the exploration and implementation of effective strategies to mitigate ecological issues while simultaneously preserving economic and social well-being. Renewable power systems offer a way to reduce adverse anthropogenic effects without hindering economic growth. This study aims to conduct a comprehensive bibliometric analysis of renewable power systems to explore their historical context, identify influential studies, and uncover research gaps, hypothesizing that global contributions and policy support significantly influence the field’s dynamics. Following Preferred Reporting Items For Systematic Reviews And Meta-Analyses guidelines, this study utilized Scopus tools analysis and VOSviewer 1.6.20 software to examine the metadata sourced from scientific databases in Scopus. The outcomes of this investigation facilitate the identification of the most prolific countries and authors, as well as collaborative efforts that enrich the theoretical landscape of renewable power systems. The study also traces the evolution of research on renewable power systems. Furthermore, the results reveal key scientific clusters in the analysis: the first cluster concentrates on renewable energy and sustainable development, the second on the relationship between government policies and renewable power systems, and the third on the role of incentives that catalyse the advancement of renewable power systems. The findings of this meta-analysis not only contribute valuable insights to existing research but also enable the identification of emerging research areas related to renewable power system development.

This article considers the task of developing mathematical models and their computer implementation that would establish the dependence of pH (acidity of the environment) on the volume and structure of raw materials for daily loading, as well as on the operating parameters of temperature and humidity based on the interval analysis of experimental data obtained during BGP research of a given type. In the process of research, based on the developed interval models, it was established that this indicator depends on the volume and structure of raw materials, as well as on the temperature and humidity of the substrate in the bioreactor. To build this mathematical model, it is proposed to use the method of interval data analysis and the method of identification of model parameters based on multidimensional optimization. The results of experimental studies for a specific type of biogas plant are given, and interval models with guaranteed prognostic properties that characterize the pH of the environment depending on the specific type of bio-raw material of solid and liquid fractions, temperature, and humidity are obtained. Based on the use of different types of raw materials, the developed models, based on experimental data, describe different configurations of the structure and volumes of raw materials for daily loading. The obtained mathematical models are an algebraic nonlinear equation that can be applied to control the level of pH of the environment in the bioreactor by determining the optimal volumes of raw materials of each type during the loading period depending on the temperature and humidity of the substrate in the bioreactor.