• Energy Research
• 12. Responsible consumption close
• 1. No poverty close
• CN close
• Netherlands Research Portal close

With the aim to fully exploit the by-products obtained after the industrial extraction of starch from sweet potatoes, a cascading approach was developed to extract high-value molecules, such as proteins and pectins, and to valorize the solid fraction, rich in starch and fibrous components. This fraction was used to prepare new biocomposites designed for food packaging applications. The sweet potato residue was added to poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in various amounts up to 40 wt % by melt mixing, without any previous treatment. The composites are semicrystalline materials, characterized by thermal stability up to 260 °C. For the composites containing up to 10 wt % of residue, the tensile strength remains over 30 MPa and the strain stays over 3.2%. A homogeneous dispersion of the sweet potato waste into the bio-polymeric matrix was achieved but, despite the presence of hydrogen bond interactions between the components, a poor interfacial adhesion was detected. Considering the significant percentage of sweet potato waste used, the biocomposites obtained show a low economic and environmental impact, resulting in an interesting bio-alternative to the materials commonly used in the packaging industry. Thus, according to the principles of a circular economy, the preparation of the biocomposites closes the loop of the complete valorization of sweet potato products and by-products.

To fix CO2 emissions efficiently from flue gas of coal-fired power plants, the culture medium, light intensity and bioreactors were comprehensively optimized in the process of CO2 fixation by Chlorella PY-ZU1. To make up for relative insufficiency of nutrients (except for the carbon source) resulting from continuous bubbling of 15% CO2, three chemicals were added into the culture to optimize the molar ratios of nitrogen to carbon, phosphorus to carbon, and magnesium to carbon in culture from 0.17 to 0.69, from 0.093 to 0.096, and from 0.018 to 0.030, respectively. Such adjustments led to a 1.25-fold increase in biomass (from 2.41 to 5.42 g L(-1)). By enhancing light intensity from 4500 to 6000 lux, the peak growth rate of Chlorella PY-ZU1 increased by 99% and reached to 0.95 g L(-1) day(-1). Use of a multi-stage sequential bioreactor notably improved the peak CO2 fixation efficiency to 85.6%.

The rapidly evolving global warming is triggering all levels of actions to reduce industrial carbon emissions, while capturing carbon dioxide of industrial origin via microalgae has attracted increasing attention. This article attempted to offer preliminary analysis on the carbon capture potential of microalgal cultivation. It was shown that the energy consumption-associated with operation and nutrient input could significantly contribute to indirect carbon emissions, making the microalgal capture of carbon dioxide much less effective. In fact, the current microalgae processes may not be environmentally sustainable and economically viable in the scenario where the carbon footprints of both upstream and downstream processing are considered. To address these challenging issues, renewable energy (e.g., solar energy) and cheap nutrient source (e.g., municipal wastewater) should be explored to cut off the indirect carbon emissions of microalgae cultivation, meanwhile produced microalgae, without further processing, should be ideally used as biofertilizer or aquafeeds for realizing complete nutrients recycling.

Accurate modelling of agricultural management impacts on greenhouse gas emissions and the cycling of carbon and nitrogen is complicated due to interactions between various processes and the disturbance caused by field management. In this study, a process-based model, the Soil-Plant-Atmosphere Continuum System (SPACSYS), was used to simulate the effects of different fertilisation regimes on crop yields, the dynamics of soil organic carbon (SOC) and total nitrogen (SN) stocks from 1990 to 2010, and soil CO2 (2007-2010) and N2O (2007-2008) emissions based on a long-term fertilisation experiment with a winter-wheat (Triticum Aestivum L.) and summer-maize (Zea mays L.) intercropping system in Eutric Cambisol (FAO) soil in southern China. Three fertilisation treatments were 1) unfertilised (Control), 2) chemical nitrogen, phosphorus and potassium (NPK), and 3) NPK plus pig manure (NPKM). Statistical analyses indicated that the SPACSYS model can reasonably simulate the yields of wheat and maize, the evolution of SOC and SN stocks and soil CO2 and N2O emissions. The simulations showed that the NPKM treatment had the highest values of crop yields, SOC and SN stocks, and soil CO2 and N2O emissions were the lowest from the Control treatment. Furthermore, the simulated results showed that manure amendment along with chemical fertiliser applications led to both C (1017 ± 470 kg C ha(-1) yr(-1)) and N gains (91.7 ± 15.1 kg N ha(-1) yr(-1)) in the plant-soil system, while the Control treatment caused a slight loss in C and N. In conclusion, the SPACSYS model can accurately simulate the processes of C and N as affected by various fertilisation treatments in the red soil. Furthermore, application of chemical fertilisers plus manure could be a suitable management for ensuring crop yield and sustaining soil fertility in the red soil region, but the ratio of chemical fertilisers to manure should be optimized to reduce C and N losses to the environment.

Exorbitant substrates for Schizochytrium culture result in the high cost of docosahexaenoic acid (DHA) production. In order to develop a feasible approach that is expected to reduce DHA production cost, Schizochytrium sp. S31 cultivation with a mixture of saline wastewater (SWW) and tofu whey wastewater (TWW) was investigated in this study. Using glucose as the carbon source, the maximum biomass and DHA yield in cultures using mixed wastewater containing 5% SWW reached 19.08 and 2.66 g/L, respectively, which were 2.29 and 2.66 times higher than those of cultures using control medium. Moreover, a good wastewater treatment performance was achieved as approximately 60% of the COD, TN, and TP were reduced in the cultures using mixed wastewater with a SWW ratio of 5%. The mixed wastewater presented better performance on DHA production than control medium using all tested carbon sources including glucose, fructose, and pure and crude glycerol. The components of control medium can be completely replaced by the mixed wastewater and crude glycerol. It is expected to effectively decrease the medium cost for DHA production and reduce the environmental risk of food processing wastewater.

Pyrolysis, one of the most promising thermal conversion technologies for biomass conversion, can decompose biomass into solid bio-char, liquid bio-oil, and combustible gas to meet different energy needs. However, pyrolysis efficiency and product quality are not as good as expected when raw biomass is used owing to the properties of raw biomass (e.g., high moisture, oxygen, and alkali metal contents). Torrefaction is an emerging biomass pretreatment technology that can improve the physical and chemical properties of raw biomass, and pyrolysis efficiency and final product quality can therefore be improved by using torrefied biomass. We review several advantages of pyrolysis of torrefied biomass in terms of the conversion process and final product quality.

Multiple techniques for soil decontamination were combined to enhance the phytoremediation efficiency of Eucalyptus globulese and alleviate the corresponding environmental risks. The approach constituted of chelating agent using, electrokinetic remediation, plant hormone foliar application and phytoremediation was designed to remediate multi-metal contaminated soils from a notorious e-waste recycling town. The decontamination ability of E. globulese increased from 1.35, 58.47 and 119.18 mg per plant for Cd, Pb and Cu in planting controls to 7.57, 198.68 and 174.34 mg per plant in individual EDTA treatments, respectively, but simultaneously, 0.9-11.5 times more metals leached from chelator treatments relative to controls. Low (2 V) and moderate (4 V) voltage electric fields provoked the growth of the species while high voltage (10 V) had an opposite effect and metal concentrations of the plants elevated with the increment of voltage. Volumes of the leachate decreased from 1224 to 134 mL with voltage increasing from 0 to 10 V due to electroosmosis and electrolysis. Comparing with individual phytoremediation, foliar cytokinin treatments produced 56% more biomass and intercepted 2.5 times more leachate attributed to the enhanced transpiration rate. The synergistic combination of the individuals resulted in the most biomass production and metal accumulation of the species under the stress condition relative to other methods. Time required for the multi-technique approach to decontaminate Cd, Pb and Cu from soil was 2.1-10.4 times less than individual chelator addition, electric field application or plant hormone utilization. It's especially important that nearly no leachate (60 mL in total) was collected from the multi-technique system. This approach is a suitable method to remediate metal polluted site considering its decontamination efficiency and associated environmental negligible risk.

As one of the most abundant biomass resources, crop stalks are great potential feedstock available for anaerobic digestion (AD) to produce biogas. However, the specific physical properties and complex chemical structures of crop stalks form strong barriers to efficient AD bioconversion. To overcome these problems, many efforts have been made over the past few years. This paper reviewed recent research in the evolving field of anaerobic bioconversion of crop stalks and was focused on three critical aspects affecting AD performance: various pretreatment methods and their effects on the improvement of crop stalk biodegradability, determination of specific AD operation parameters for crop stalks, and development of AD technologies. Finally, recommendations on the future development of crop stalk AD were proposed.