• Energy Research
• Closed Access close
• TH close
• AT close
• SDSN Greece close

Abstract Socio-technical transformations towards low-carbon energy systems are on the way in developed countries. Conversely, developing countries tend to be locked in fossil fuels and foster coal-based energy structures, emphasizing reliable and cost-effective energy provision and sidelining environmental concerns. In this study, we identified and analysed the predominant factors related to coal-based power generation in Bangladesh. We applied a mixed-method approach, initially conducting a systematic literature review and, subsequently, semi-structured expert interviews to identify and validate relevant factors. We then assessed their relative importance using an Analytical Hierarchy Process based on expert judgments. The results of this assessment reveal that socio-economic aspects and environmental issues scored highest, while technological aspects and sector regulations were considered to be less relevant for large-scale coal power implementation. We conclude that future energy policies created in Bangladesh will need to use appropriate legal instruments and address issues such as human displacement and resettlement, low levels of public acceptance, health hazards and environmental pollution. Participative policy frameworks should be deployed in coal plant projects, and active monitoring systems are necessary to reduce the negative consequences associated with increased electrification and energy consumption. To address foreseeable structural challenges, it furthermore will be crucial to explore sustainable alternatives.

We evaluated two-step hydrothermal liquefaction in a semi-continuous reactor for recovery of both nutri- ents and biocrude from the alga Coelastrum sp. in direct comparison with a one-step process. The influence of the operating temperature, pressure and water flow rate was investigated by means of a 2 k factorial experimental design and response surface methodology. The two-step process gave a higher total biocrude yield (~36 wt% (daf. basis)) and nutrient recovery level in terms of nitrogen containing compounds (~60 wt% of the protein content in the original algae as ammonium and nitrate ions and protein/polypeptides) than the single-step process. The highest biocrude yield was achieved at first-step temperature of 473 K, second-step temperature of 593 K, pressure of 200 bar and water flow rate of 0.5 mL/min.

Purpose This paper aims to investigate the current energy status in the West Balkan countries and the related perspectives for renewable energy sources (RES) cooperation mechanisms, within the framework of RES Directive 2009/28/European Commission (EC), through the elaboration of a SWOT (strengths, weaknesses, opportunities, threats) analysis. Particular emphasis is laid on the case of Bosnia-Herzegovina, Croatia and Serbia. The SWOT analysis provides a clearer view of expanding RES in the West Balkans, as well as the level of utilization and potential of cooperation mechanisms and renewable energy in each country. Design/methodology/approach The adopted approach is mainly based on the context of a project co-financed by the Intelligent Energy Europe Programme, titled “Bringing Europe and Third countries closer together through renewable Energies (BETTER)” (project number: IEE/11/845/SI2.616378). The adopted approach incorporates the steps of desktop analysis, stakeholders’ mapping and engagement, key factors’ identification and analysis of results. Findings The barriers to expand RES in the region are significant. Currently, the region is electricity importer and by far not in the position to efficiently exploit the large RES potentials. It remains to be seen whether and to what extent cooperation mechanisms may be used in the Western Balkans and the EU by 2020. The unification of the fragmented electricity system and market-oriented reforms aim to join regional power markets and then to integrate with the European Union power market. There is a multitude of market barriers for RES, resulting in a high risk perception n by investors. Cooperation mechanisms could strengthen the regions’ policy frameworks and be a starting point to integrate the region’s energy systems and to overcome the fragmentation of the past two decades. Originality/value The potential of West Balkan countries to make use of the cooperation mechanisms provides opportunities for RES exporting between West Balkan and other European countries. An analysis of these opportunities for cooperation will allow drawing clearer conclusions on cooperation potentials and business cases for the region.

Energy efficiency is an objective of public interventions at least since the Public Utility Regulatory Policy Act of 1978 (PURPA). Recently, conservation has received considerable attention in the United States and in particular in the European Union but this time in order to mitigate global warming. Policy measures include regulations at the technical level and the introduction of white certificates in order to force utilities and firms to invest into conservation in a way similar to the already existing renewable energy quota. This paper derives the optimal mechanism if utilities must deal with white certificates facing consumers holding private information. The optimal mechanism has some theoretically interesting features like restricted participation and a discontinuity.

Abstract Carbon-based counter electrodes of dye-sensitized solar cells (DSSCs) such as carbon black-graphite composite (CB/Gr) have received unprecedented interest in recent years due to their ease of fabrication, good corrosion resistance, and low cost compared to platinum (Pt) electrodes. However, the poor surface adherence between the carbon counter electrodes (CE) and FTO substrate, low surface area, and poor inter-particle connection between the carbon materials have consistently become a major challenge. In order to overcome these issues, we have fabricated CB/Gr by incorporating binders of titanium (IV) isopropoxide (TTIP), and zirconium (IV) dioxide (ZrO2) as the counter electrodes for the DSSC. The performance of the CE is characterized by four-point probe conductivity measurement, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), and current density voltage (J-V) characteristics. The results revealed that incorporating binders to the CB/Gr has improved the series resistance (RS) and charge transfer resistance (RCT), which enhances the short-circuit current density (JSC), fill factor (FF), and the power conversion efficiency (PCE) of the device. The TTIP binder in CB/Gr CE exhibited superior performance in DSSC is largely attributed to the formation of TiO2 in situ with small particle size of about 100 nm, leading to enhanced intimate contact between the carbon materials, high surface area, and better surface adherence between counter electrode and the FTO substrate. Our findings, thereby, offer the possibility to engineer and optimize the energy levels of CE in an effort to develop a high-performing DSSC counter electrode.

Meteorological forcing at the air-water interface is the main determinant of the heat balance of most lakes (Edinger et al., 1968; Sweers, 1976). Year-to-year changes in the weather therefore have a major effect on the thermal characteristics of lakes. However, lakes that differ with respect to their morphometry respond differently to these changes (Gorham, 1964), with deeper lakes integrating the effects of meteorological forcing over longer periods of time. Other important factors that can influence the thermal characteristics of lakes include hydraulic residence time, optical properties and landscape setting (e.g. Salonen et al., 1984; Fee et al., 1996; Livingstone et al., 1999). These factors modify the thermal responses of the lake to meteorological forcing (cf. Magnuson et al., 2004; Blenckner, 2005) and regulate the patterns of spatial coherence (Chapter 17) observed in the different regions (Livingstone, 1993; George et al., 2000; Livingstone and Dokulil, 2001; Jarvinen et al., 2002; Blenckner et al., 2004)

Abstract As pyrolysis reaction is one of an important reaction applied to lignocellulosic biomass in order to transform it to be user-friendly energy form recognized as prospective alternative energy source, the reaction has been widely investigated in order to understand the mechanisms and kinetics of the pyrolysis. However, modeling pyrolysis of biomass is full of complication. As lignocellulosic biomass is not a homogeneous chemical source, chemical compositions in biomass are also uncertain and they vary even in the same biomass. The reactions of imprecise chemical compositions in biomass affects the capability of deterministic model in modeling chemical reaction since available deterministic models are designed to model homogeneous and precise chemical compositions. With this problem, it raises the idea of using model which has ability to calculate something ambiguous. Since the fuzzy logic-based model which is adaptive network-based fuzzy inference system (ANFIS) is built to calculate uncertainty, the model should be suitable to handle uncertainty which is imprecise chemical compositions in the reaction. The proposed model is built with four input variables: the reaction time, amount of cellulose component, amount of hemicellulose component, and amount of lignin component in biomass. The model is trained with tuning datasets which are the pyrolysis datasets of lignin, cellulose and Madhuca before applying to predict the pyrolysis reactions of Pongamia pinnata and Jatropha curcas . The comparative results show that the proposed model can correctly predict 91.82% and 97.29%, respectively, of the pyrolysis reactions of P. pinnata and J. curcas . As the ANFIS model gives good prediction in modeling pyrolysis of two different biomasses, the model can be applied to predict the pyrolysis reaction of other lignocellulosic biomass products.

A biodiesel wastewater treatment technology was investigated for neutral alkalinity and COD removal by microbial fuel cell. An upflow bio-filter circuit (UBFC), a kind of biocatalyst MFC was renovated and reinvented. The developed system was combined with a pre-fermented (PF) and an influent adjusted (IA) procedure. The optimal conditions were operated with an organic loading rate (OLR) of 30.0 g COD/L-day, hydraulic retention time (HRT) of 1.04 day, maintained at pH level 6.5-7.5 and aerated at 2.0 L/min. An external resistance of circuit was set at 10 kΩ. The purposed process could improve the quality of the raw wastewater and obtained high efficiency of COD removal of 15.0 g COD/L-day. Moreover, the cost of UBFC system was only US$1775.7/m3 and the total power consumption was 0.152 kW/kg treated COD. The overall advantages of this invention are suitable for biodiesel wastewater treatment.

Provincial Electricity Authority (PEA) has a submarine cable project to Koh Tao in Surat Thani Province, Thailand to increase the capacity, stability and support the growing demand for electricity in Koh Tao due to a high economic growth rate. At present, Koh Tao uses electricity from diesel power plants resulting in high costs in maintenance, fuel, and electricity, causing PEA to bear many losses each year. Investment in the construction of a distribution system linked by submarine cable is a project that uses a lot of investment cost in constructions and in each construction also affects the environment as well. Thus, there must be an effective method of calculating the investment value to ensure that the investment projects are appropriate and cost-effective throughout the life of the asset. This paper presents the analysis of the financial feasibility of the submarine cable project to ensure that it will have economic benefits and be effective throughout the asset utilization period with life-cycle cost analysis. In this paper, three alternatives are simulated, and the life-cycle cost (LCC) of all three alternatives are calculated. Then, the analysis is performed to find which options are worth the most investment. Common network asset indices methodology (CNAIM) is applied to determine the age of the submarine cable used in the project. In addition, this method can be used to find the probability of failure (PoF) of the submarine cable which is an important parameter and is used to calculate in the LCC model to achieve the purpose of this paper.