• Energy Research
• BE close
• AE close

Spinel LiNi0.5Mn1.5O4 as one of the high-energy positive electrode materials for next generation Li-ion batteries has attracted significant interest due to its economic and environmental advantages. However, the sensitivity of this type of material upon short to long term ambient storage conditions and the impact on the electrochemical performances remains poorly explored. Nevertheless, this remains an important aspect for practical large-scale synthesis, storage and utilization. Herein, we study and compare the evolution of surface chemistry, bulk crystal structure and elemental content evolution and distribution of LiNi0.5Mn1.5O4 using a variety of characterization techniques including XPS and STEM-EDS-EELS, as well as electrochemical analysis. We show that Mn species dominate the outer surface (0–5 nm), while Ni and Li are preferentially located further away and in the bulk. The studied LiNi0.5Mn1.5O4 material is found to be stable, with minor changes in surface or bulk characteristics detected, even after 12 months of storage under ambient air conditions. The low surface reactivity to air also accounts for the minor changes to the electrochemical performance of the air-exposed LiNi0.5Mn1.5O4, compared to the pristine material. This study provides guidance for the appropriate storage, handling and processing of this high-performance cathode material.

Abstract In the next 25 years an unprecedented number of new marine artificial structures, over 75,000 offshore wind turbines alone, are planned to meet global net zero targets. Structures are required to last for multiple decades in the hostile marine environment; where the largest cost across their whole lifecycle is on operations and maintenance dependent on accessibility in calm seas. However, the role of climate change on accessibility, and thus operational cost, has not been resolved. Here we provide the first study of future accessibility; evaluated from global climate model driven wave modelling, using the high emission scenario (RCP8.5). We found that climate change drives significant regional variation in accessibility, with the northern hemisphere benefiting from a 6% increase in operating windows whilst accessibility in parts of the southern hemisphere is reduced by 6-9%. These findings will help offshore developers and stakeholders incorporate adaptions to climate change as part of strategic planning practices.

La production industrielle d'huile de palme génère simultanément une quantité substantielle de fibres de grappe de fruits vides (EFB) qui pourraient être utilisées comme matière première dans une bioraffinerie à base de lignocellulose. Les sous-produits de la lignine générés par ce processus peuvent offrir des possibilités d'isolation des produits à valeur ajoutée, tels que le p-hydroxybenzoate (pBz), pour aider à compenser les coûts d'exploitation. L'analyse de la lignine EFB par spectroscopie de résonance magnétique nucléaire (RMN) a clairement révélé la présence d'acétate lié et de pBz, la saponification révélant que 1,1 % en poids de l'EFB était du pBz ; avec une teneur en lignine de 22,7 %, 4,8 % de la lignine est du pBz qui peut être obtenu comme composant pur pour être utilisé comme charge chimique. L'analyse de la lignine EFB par RMN et dérivatisation suivie d'un clivage réducteur (DFRC) a montré que le pBz acylate sélectivement le groupe γ-hydroxyle des unités S. Cette sélectivité suggère que le pBz, de manière analogue à l'acétate dans le kénaf, le p-coumarate dans les graminées et le ferrate dans un peuplier transgénique augmenté d'une féruloyl-CoA monolignol transférase (FMT), est incorporé dans la chaîne de lignine en croissance via son conjugué monolignol γ-p-hydroxybenzoylé. L'implication de tels conjugués dans la lignification des palmiers est prouvée par l'observation de nouvelles unités couplées au β-β non résinol p-hydroxybenzoylé dans les lignines. Ensemble, les données impliquent l'existence de p-hydroxybenzoyl-CoA :monolignol transférases qui sont impliquées dans la lignification chez les différents saules (Salix spp.), peupliers et peupliers faux-trembles (Populus spp., famille des Salicacées) et palmiers (famille des Arecacées) qui ont des lignines p-hydroxybenzoylées. Même sans augmenter les niveaux par la sélection ou le génie génétique, les « déchets » actuels de l'EFB d'huile de palme devraient être en mesure de générer un flux important d'acide p-hydroxybenzoïque qui offre des opportunités pour le développement de produits à valeur ajoutée dérivés de l'industrie du palmier à huile. La producción industrial de aceite de palma genera simultáneamente una cantidad sustancial de fibras de racimo de frutas vacías (EFB) que podrían utilizarse como materia prima en una biorrefinería a base de lignocelulosa. Los subproductos de lignina generados por este proceso pueden ofrecer oportunidades para el aislamiento de productos de valor agregado, como el p-hidroxibenzoato (pBz), para ayudar a compensar los costos operativos. El análisis de la lignina EFB por espectroscopía de resonancia magnética nuclear (RMN) reveló claramente la presencia de acetato unido y pBz, y la saponificación reveló que el 1,1% en peso del EFB era pBz; con un contenido de lignina del 22,7 %, el 4,8 % de la lignina es pBz que se puede obtener como un componente puro para su uso como materia prima química. El análisis de la lignina EFB por RMN y la derivatización seguida de escisión reductora (DFRC) mostró que pBz acila selectivamente el grupo γ-hidroxilo de las unidades S. Esta selectividad sugiere que pBz, análogamente con acetato en kenaf, p-cumarato en gramíneas y ferular en un álamo transgénico aumentado con una feruloil-CoA monolignol transferasa (FMT), se incorpora a la cadena de lignina en crecimiento a través de su conjugado de monolignol γ-p-hidroxibenzoilado. La participación de dichos conjugados en la lignificación de la palma se demuestra al observar nuevas unidades no acopladas a β-β-resinol p-hidroxibenzoiladas en las ligninas. Juntos, los datos implican la existencia de p-hidroxibenzoil-CoA:monolignol transferasas que participan en la lignificación en los diversos sauces (Salix spp.), álamos y álamo temblón (Populus spp., familia Salicaceae) y palmeras (familia Arecaceae) que tienen ligninas p-hidroxibenzoiladas. Incluso sin mejorar los niveles mediante mejoramiento o ingeniería genética, los 'desechos' actuales de aceite de palma EFB deberían ser capaces de generar una corriente considerable de ácido p-hidroxibenzoico que ofrezca oportunidades para el desarrollo de productos de valor agregado derivados de la industria de la palma aceitera. The industrial production of palm oil concurrently generates a substantial amount of empty fruit bunch (EFB) fibers that could be used as a feedstock in a lignocellulose-based biorefinery. Lignin byproducts generated by this process may offer opportunities for the isolation of value-added products, such as p-hydroxybenzoate (pBz), to help offset operating costs. Analysis of the EFB lignin by nuclear magnetic resonance (NMR) spectroscopy clearly revealed the presence of bound acetate and pBz, with saponification revealing that 1.1 wt% of the EFB was pBz; with a lignin content of 22.7 %, 4.8 % of the lignin is pBz that can be obtained as a pure component for use as a chemical feedstock. Analysis of EFB lignin by NMR and derivatization followed by reductive cleavage (DFRC) showed that pBz selectively acylates the γ-hydroxyl group of S units. This selectivity suggests that pBz, analogously with acetate in kenaf, p-coumarate in grasses, and ferulate in a transgenic poplar augmented with a feruloyl-CoA monolignol transferase (FMT), is incorporated into the growing lignin chain via its γ-p-hydroxybenzoylated monolignol conjugate. Involvement of such conjugates in palm lignification is proven by the observation of novel p-hydroxybenzoylated non-resinol β–β-coupled units in the lignins. Together, the data implicate the existence of p-hydroxybenzoyl-CoA:monolignol transferases that are involved in lignification in the various willows (Salix spp.), poplars and aspen (Populus spp., family Salicaceae), and palms (family Arecaceae) that have p-hydroxybenzoylated lignins. Even without enhancing the levels by breeding or genetic engineering, current palm oil EFB 'wastes' should be able to generate a sizeable stream of p-hydroxybenzoic acid that offers opportunities for the development of value-added products derived from the oil palm industry. ينتج الإنتاج الصناعي لزيت النخيل في الوقت نفسه كمية كبيرة من ألياف مجموعة الفاكهة الفارغة (EFB) التي يمكن استخدامها كمادة وسيطة في مصفاة حيوية تعتمد على اللجينوسليلوز. قد توفر المنتجات الثانوية لليجنين الناتجة عن هذه العملية فرصًا لعزل المنتجات ذات القيمة المضافة، مثل p - hydroxybenzoate (pBz)، للمساعدة في تعويض تكاليف التشغيل. كشف تحليل اللجنين EFB بواسطة مطياف الرنين المغناطيسي النووي (NMR) بوضوح عن وجود أسيتات مرتبطة و pBz، مع كشف التصبن أن 1.1 ٪ بالوزن من EFB كان pBz ؛ مع محتوى اللجنين بنسبة 22.7 ٪، 4.8 ٪ من اللجنين عبارة عن pBz يمكن الحصول عليه كمكون نقي للاستخدام كمادة وسيطة كيميائية. أظهر تحليل اللجنين EFB بواسطة NMR والاشتقاق متبوعًا بالانقسام الاختزالي (DFRC) أن pBz يعمل بشكل انتقائي على أسيتيل مجموعة γ - hydroxyl من وحدات S. تشير هذه الانتقائية إلى أن pBz، بالتناظر مع الأسيتات في الكناف، و p - comarate في الأعشاب، و ferulate في حور معدّل وراثيًا معززًا بـ feruloyl - CoA monolignol transferase (FMT)، يتم دمجه في سلسلة اللجنين المتنامية عبر γ - p - hydroxybenzoylated monolignol conjugate. ثبت تورط مثل هذه المترافقات في ترصيع النخيل من خلال ملاحظة وحدات p - hydroxybenzoylated غير الراتينول β - β المقترنة في اللجنين. معا، تشير البيانات إلى وجود p - hydroxybenzoyl - CoA: monolignol transferases التي تشارك في تبييض في الصفصاف المختلفة (Salix spp.)، الحور والحور (Populus spp.، عائلة Salicaceae)، والنخيل (عائلة Arecaceae) التي تحتوي على p - hydroxybenzoylated lignins. حتى من دون تعزيز المستويات عن طريق التكاثر أو الهندسة الوراثية، يجب أن تكون "نفايات" زيت النخيل الحالية قادرة على توليد تيار كبير من حمض p - hydroxybenzoic الذي يوفر فرصًا لتطوير منتجات ذات قيمة مضافة مشتقة من صناعة نخيل الزيت.

Abstract Emissions and efficiency of a pellet boiler (40 kW) at nominal load were compared with emissions and efficiency at reduced load, while fired with six biomass pellets. The pellets include reed canary grass ( Phalaris arundinacea ), pectin waste from citrus shells ( Citrus reticulata ), sunflower husk ( Helianthus annuus ), peat, wheat straw ( Triticum aestivum ) and wood pellets. The measurements of emissions comprised of carbon monoxide (CO), nitrogen oxides (NO x ), sulphur oxides (SO x ) and flue dust mass concentrations (using DIN plus and isokinetic sampling techniques). Emissions varied as a function of operational loads, for each type of pellets. The CO emissions were insignificant with reed canary grass (RCG), citrus pectin waste (CPW) and straw pellets at nominal load, however, at reduced load same pellets emitted 1.9, 4.0 and 7.4 times higher CO than wood pellets, respectively. Peat pellets emitted maximum CO at nominal load (4221.1 mgNm −3 , 12.6 times higher than wood pellets) however; at reduced load CO emission was insignificant. The highest NO x emissions were reported with CPW, which were 3.4 and 4.6 times higher than wood pellets at nominal load and reduced load, respectively. Dust emissions were highest with sunflower husk and lowest with RCG pellets, at both operational modes. The best performance was reported with wood pellets, followed by RCG and pectin pellets, however, wood pellets combustion emitted 1.7 and 2.0 times higher dust DIN plus than RCG at nominal and reduced loads, respectively. Not only fuel specific combustion optimization but also operational load specific optimization is essential for efficient use of agro-pellets in this type of boilers.

The flue-wall deformation during the service life of carbon anode baking furnaces has a substantial impact on the carbon anode quality (i.e., thermal, electrical, and mechanical properties) used in the reduction cell of aluminum production. Deformation of the furnace flue-walls, which is one critical mode of furnace aging, leads among others to inhomogeneous baking of the anodes and consequently to a deterioration of the resulting anode quality. This paper focuses on the development of a 3D multi-physics computational model, which is able to take into account a large number of physical phenomena and parameters that play a role in the baking process while considering different levels of the flue-wall deformation. In fact, this 3D model takes into account the thermo-hydro-mechanical coupling due to coupled fluid flow and transient heat transfer, packing coke load and the thermal expansion, and enable us to analyze the influence of these parameters on the resistance to deflection of the flue-walls, and ultimately improved baking process and furnace geometry can be proposed The developed model can predict the anode temperature distribution, creation of hot spot and anode overbaking in certain area as a function of the flue wall deformation mode. By developing this tool, we can effectively predict the deformable flue wall reliability under varying operating conditions, and provide useful insights on enhancing the long-term structural integrity through furnace retrofitting or design adjustment.

In the current situation with the unprecedented deployment of clean technologies for electricity generation, it is natural to expect that storage will play an important role in electricity networks. This paper provides a qualitative methodology to select the appropriate technology or mix of technologies for different applications. The multiple comparisons according to different characteristics distinguish this paper from others about energy storage systems. Firstly, the different technologies available for energy storage, as discussed in the literature, are described and compared. The characteristics of the technologies are explained, including their current availability. In order to gain a better perspective, availability is cross-compared with maturity level. Moreover, information such as ratings, energy density, durability and costs is provided in table and graphic format for a straightforward comparison. Additionally, the different electric grid applications of energy storage technologies are described and categorised. For each of the categories, we describe the available technologies, both mature and potential. Finally, methods for connecting storage technologies are discussed.

Little is known about the validity of repeated 24-h dietary recalls (24-HDR) as a measure of total energy intake (EI) in young children. This study aimed to evaluate the validity of proxy-reported EI by comparison with total energy expenditure (TEE) measured by the doubly labeled water (DLW) technique.The agreement between EI and TEE was investigated in 36 (47.2% boys) children aged 4-10 years from Belgium and Spain using subgroup analyses and Bland-Altman plots. Low-energy-reporters (LER), adequate-energy-reporters (AER) and high-energy-reporters (HER) were defined from the ratio of EI over TEE by application of age- and sex-specific cut-off values.There was good agreement between means of EI (1500 kcal/day) and TEE (1523 kcal/day) at group level though in single children, i.e. at the individual level, large differences were observed. Almost perfect agreement between EI and TEE was observed in thin/normal weight children (EI: 1511 kcal/day; TEE: 1513 kcal/day). Even in overweight/obese children the mean difference between EI and TEE was only -86 kcal/day. Among the participants, 28 (78%) were classified as AER, five (14%) as HER and three (8%) as LER.Two proxy-reported 24-HDRs were found to be a valid instrument to assess EI on group level but not on the individual level.