• Energy Research
• Open Access close
• Restricted close
• Open Source close
• AT close
• TU Wien close

AbstractDecarbonising the energy system requires high shares of variable renewable generation and sector coupling like power to heat. In addition to heat supply, heat pumps can be used in future energy systems to provide flexibility to the electricity system by using the thermal storage potential of the building stock and buffer tanks to shift electricity demand to hours of high renewable electricity production. Bridging the gap between two methodological approaches, we coupled a detailed building technology operation model and the open-source energy system model Balmorel to evaluate the flexibility potential that decentral heat pumps can provide to the electricity system. Austria in the year 2030 serves as an example of a 100% renewable-based electricity system (at an annual national balance). Results show that system benefits from heat pump flexibility are relatively limited in extent and concentrated on short-term flexibility. Flexible heat pumps reduce system cost, CO2 emissions, and photovoltaics and wind curtailment in all scenarios. The amount of electricity shifted in the assessed standard flexibility scenario is 194 GWhel and accounts for about 20% of the available flexible heat pump electricity demand. A comparison of different modelling approaches and a deterministic sensitivity analysis of key input parameters complement the modelling. The most important input parameters impacting heat pump flexibility are the flexible capacity (determined by installed capacity and share of control), shifting time limitations, and cost assumptions for the flexibility provided. Heat pump flexibility contributes more to increasing low residual loads (up to 22% in the assessed scenarios) than decreasing residual load peaks. Wind power integration benefits more from heat pump flexibility than photovoltaics because of the temporal correlation between heat demand and wind generation.

After a halt of four years, the n TOF spallation neutron facility at CERN has resumed operation in November 2008 with a new spallation target characterized by an improved safety and engineering design, resulting in a more robust overall performance and e cient cooling. The rst measurement during the 2009 run has aimed at the full characterization of the neutron beam. Several detectors, such as calibrated ssion chambers, the n TOF Silicon Monitor, a Mi- croMegas detector with 10B and 235U samples, as well as liquid and solid scintillators have been used in order to characterize the properties of the neutron uence. The spatial pro le of the beam has been studied with a specially designed \X-Y

AbstractChemical looping combustion is a highly efficient CO2 separation technology without direct contact between combustion air and fuel. A metal oxide is used as an oxygen carrier in dual fluidized beds to generate clean CO2. The use of biomass is the focus of current research because of the possibility of negative CO2 emissions and the utilization of biogenic carbon. The most commonly proposed OC are natural ores and residues, but complete combustion has not yet been achieved. In this work, the direct utilization of CLC exhaust gas for methane synthesis as an alternative route was investigated, where the gas components CO, CH4 and H2 are not disadvantageous but benefit the reactions in a methanation step. The whole process chain, the coupling of an 80 kWth pilot plant with gas cleaning and a 10 kW fluidized bed methanation unit were for this purpose established. As OC, ilmenite enhanced with limestone was used, combusting bark pellets in autothermal operation at over 1000 °C reaching high combustion efficiencies of up to 91.7%. The fuel reactor exhaust gas was mixed with hydrogen in the methanation reactor at 360 °C and converted with a methane yield of up to 97.3%. The study showed especially high carbon utilization efficiencies of 97% compared to competitor technologies. Based on the experimental results, a scale-up concept study showed the high potential of the combination of the technologies concerning the total efficiency and the adaptability to grid injection. Graphical Abstract

This paper presents the goals and components of a quantitative energy balance assessment framework to define PEDs flexibly in three important contexts: the context of the district's density and RES potential, the context of a district's location, induced mobility and the context of the dis-trict's future environment and its decarbonized energy demand or supply. It starts by introducing the practical goals of this definition approach: achievable, yet sufficiently ambitious to be inline with Paris 2050 for most urban and rural Austrian district typologies. It goes on to identify the main design parts of the definition: system boundaries, balancing weights and balance targets and argue how they can be linked to the definition goals in detail. In particular we specify three levels of system boundaries and argue their individual necessity: operation, including everyday mobili-ty, including embodied energy and emissions. It argues that all three pillars of PEDs, energy effi-ciency, onsite renewables and energy flexibility can be assessed with the single metric of a prima-ry energy balance when using carefully designed, time-dependent conversion factors. Finally, it is discussed how balance targets can be interpreted as information and requirements from the sur-rounding energy system, which we identify as a "context factor". Three examples of such context factors, each corresponding to the balance target of one of the previously defined system bounda-ries operation, mobility and embodied emissions are presented: Density (as a context of opera-tion), sectoral energy balances and location (as a context for mobility) and an outlook of a person-al emission budgets (as a context for embodied emissions). Finally, the proposed definition framework is applied to seven distinct district typologies in Austria and discussed in terms of its design goals.

Abstract Aerogel based insulation plaster has the potential to facilitate the thermal retrofit of historic buildings as its deployment can accommodate the requirements of historical preservation. Thereby, the thermal resistance of historical facades can be increased while maintaining their appearance. The present contribution includes the results of a long-term empirical examination of aerogel containing plaster systems especially for historic buildings under real conditions. In the course of this study, multiple test fields with aerogel insulation plaster were applied to the external walls of an existing room in a university building. Thereby different finishing coatings as well as variations with and without reinforcement mesh were considered. Over a period of three years, external and internal environmental parameters as well as hygro-thermal conditions (temperature, moisture concentration, heat flux) at multiple layers within the test fields were monitored. Moreover, the external appearance of the test fields was regularly captured via observation and photographic documentation. The measured data provided the basis to compare the actual thermal transmittance of the test fields with calculation results based on declared material properties. In addition, the results facilitate the comparison of the different solutions. Specifically, the results suggest a promising thermal performance level (in view of considerably lower U-values) as compared to conventional plaster products. Furthermore, the findings document the role of the finishing layer’s composition in view of the occurrence of potential cracks in the facade.

The present study investigates how three different silicate-based bed materials behave in bubbling fluidized bed combustion of a model agricultural residue with respect to ash composition, namely barley straw. Quartz, natural K-feldspar, and olivine were all used in combustion at 700 °C, and the resulting layer formation and bed agglomeration characteristics were determined. Based on this, a general reaction model for bed ash from agricultural residues was proposed, taking into account the reactivity of the different silicates investigated towards the main ash-forming elements K, Ca, and Si. The proposed reaction model links bed material interaction with K-rich bed ash to the degree of polymerization of the silicate bed material, where addition reactions occur in systems with high polymerization, predominately in quartz, and substitution reactions dominate for depolymerized silicates such as K-feldspar and olivine. Validerad;2024;Nivå 2;2024-03-11 (hanlid);Full text license: CC BY