• Energy Research
• Closed Access close
• IN close
• AU close
• Solar Energy close

Abstract Thermal performance of three naturally ventilated public buildings in which the wind tower is an important architectural freature is studied. One of the three builidings as well as it's wind tower is instrumented for temperature, relative humidity and airflow velocity measurements, and the other two are instrumented for temperature measurement. The results have led to a discussion concerning the degree of wind tower effectiveness in achieving thermal comfort.

Abstract An electrochemical conversion technique has been developed to deposit selective black nickel coatings of solar absorptance 0.90–0.94 and thermal emittance (at 100°C) 0.08–0.15 on galvanized iron, zincated, and zinc electroplated aluminium surfaces. The effect of electrochemical conversion parameters on the microstructure, optical and thermal properties and durability of the coatings has been established.

Abstract A new method of tracking the maximum power point (MPP) of a photovoltaic (PV) module exploiting the effects of the inherent characteristic resistances of the photovoltaic cells is proposed in this paper. An analysis of the mathematical model of the IV characteristic of the PV module revealed a possibility of estimating the MPP from its characteristic parameters such as the open circuit voltage (Voc), short circuit current (Isc), series resistance (Rse) and the shunt resistance (Rsh). The first stage of estimation process, for obtaining the voltage at the MPP, was facilitated by the effects of the series and shunt resistance on the IV characteristic of the PV module and the second stage of estimation process was facilitated by the combined process of the first stage of estimation and the condition for extracting the maximum power from the mathematical model of the pv characteristic of the PV module. The estimated voltage at the MPP in the second stage of estimation was found very close to the true MPP. The effectiveness of tracking the MPP with the proposed method has closely matched with the true MPP. This was validated by the results obtained through simulations and experiments. An analysis of the effects of degradation on the performance of the proposed technique showed that the performance was excellent during the first few years and with the update of characteristic resistances in the proposed algorithm the performance was found to be almost invariant. The successful experimental results obtained with a 100 Wp PV module indicate that the technique can be favourably implemented for standalone PV power systems.

Abstract Exergy analysis is very helpful for reducing irreversibility and rising the efficiency of solar collectors. The major objective of the present study is to organize a review on exergy analysis of different parabolic solar collectors. The effects of various flows and geometrical parameters of parabolic thermal collectors on the exergy efficiency were presented and discussed. In addition, comparative study was carried out to select the best solar thermal system for maximum exergy efficiency with minimal thermal losses. This study indicated that the hybrid nanofluids enhanced the exergy efficiency significantly as compared to without hybrid nanofluids. Passive techniques comprising twisted tape inserts, fins and insertion of swirl devices in the stream for changing the stream patterns causes to interrupt the thermal boundary layer and accordingly high exergy efficiency. This review would also throw light on the scope for further research and recommendation for improvement in the existing solar thermal collectors. Finally, this work will be beneficial for the scholars working on exergy analyses of solar parabolic collectors.

Copper indium diselenide (CuInSe2) compound was synthesized by reacting its constituent’s elements copper, indium and selenium in near stoichiometric proportions (i.e. 1:1:2 with 5% excess selenium) in an evacuated quartz ampoule. Synthesized pulverized compound material was used as an evaporant material to deposit thin films of CuInSe2 onto organically cleaned sodalime glass substrates, held at different temperatures (300–573 K), by means of single source thermal evaporation method. The phase structure and the composition of chemical constituents present in the synthesized compound and thin films have been investigated using X-ray diffraction and energy dispersive X-ray analysis, respectively. The investigations show that CuInSe2 thin films grown above 423 K are single phase, having preferred orientation of grains along the (112) direction, and having near stoichiometric composition of elements. The surface morphology of CuInSe2 films, deposited at different substrate temperatures, has been studied using the atomic force microscopy to estimate its surface roughness. An analysis of the transmission spectra of CuInSe2 films, recorded in the wavelength range of 500–1500 nm, revealed that the optical absorption coefficient and the energy band gap for CuInSe2 films, deposited at different substrate temperatures, are ∼104 cm−1 and 1.01–1.06 eV, respectively. The transmission spectrum was analyzed using iterative method to calculate the refractive index and the extinction coefficient of CuInSe2 thin film deposited at 523 K. The Hall effect measurements and the temperature dependence of the electrical conductivity of CuInSe2 thin films, deposited at different substrate temperatures, revealed that the films had electrical resistivity in the range of 0.15–20 ohm cm, and the activation energy 82–42 meV, both being influenced by the substrate temperature.

Abstract Periodically adjusted parabolic mirror/evacuated tube absorber combinations are evaluated using computer simulation methods. The results show that a 4–6 X reflector adjusted 10–15 times per year, operating at 150°C, competes favourably in cost-effective terms with a fixed reflector CPC collector operating at 50°C. Periodically adjusted collectors are advocated for medium temperature industrial applications below 200°C.

Abstract The desalination of water is a process wherein the brackish water is purified by removing the salts. With increasing demand for fresh water, there is a vast scope for development of sea water desalination process. A number of methods exist for the desalination process, but solar desalination method promises to save energy in today’s energy crunch scenario. A novel solar desalination setup is proposed here. It uses an elliptic hyperboloid concentrator and a helical receiver along with a multi-tray desalination unit to purify water in the most effective manner. The helical receiver proposed in the present work aims at the Dean Flow effect in order to enhance heat transfer in laminar flow. The effectiveness of this property with respect to various physical parameters has been observed and an optimum design has been suggested based on this. The elliptic hyperboloid concentrator is a special design for concentrating solar radiation because of it offers to operate at high efficiency without the requirement of tracking. A detailed ray-tracing code was developed to simulate the radiation incident on the concentrator and an accurate estimation of the optical efficiency was made based on this. The two systems were integrated in order to arrive at a maximum output level for the solar desalination system as a whole.