• Energy Research
• engineering and technology close
• AU close
• UA close
• GB close
• English close

Wave energy is an important renewable energy source. Previous studies of wave energy conversion (WEC) have focused on the maximum power take-off (PTO) techniques of a single machine. However, there is a lack of research on the energy and power quality of wave farm systems. Owing to the pulsating nature of ocean waves and popular PTO devices, the generated electrical power suffers from severe fluctuations. Existing solutions require extra energy storage and overrated power converters for wave power integration. In this study, we developed a master-slave wave farm system with rotor inertia energy storage; this system delivers self-smoothed power output to the grid and reduces the number of converters. Two control methods based on the moving average filter (MAF) and energy filter (EF) are proposed to smooth the output power of wave farms. RTDS simulations show that the proposed systems and control methods facilitate simple and smooth grid integration of wave energy. Keywords: Wave farm, Energy storage, Power smoothing, Power quality, Energy quality

Exhaust hoods are commonly used to capture all emissions from stationary combustion systems that are open to the environment, such as residential heaters or stoves. For experimental purposes, emissions are sampled at one, or more, discrete locations downstream in the exhaust duct. Point-wise measurements in the duct are often taken with the assumption that the emissions are homogeneously distributed across the duct cross-section, because the flow is turbulent and therefore believed to be thoroughly mixed. However, the length of such systems is rarely sufficient to ensure fully-developed flow, and the actual homogeneity is seldom assessed. In the present work the mixing within the duct is investigated by simulating the emissions distribution within various hood and duct configurations. The simulations include a straight duct with and without baffles and two different exhaust hood configurations, namely at the Stove Testing Lab at Lawrence Berkeley National Laboratory (LBNL) and at the University of Adelaide that meet standard requirements. The air flow in the ducts was simulated using Reynolds-averaged (RANS) turbulence modelling, with carbon monoxide (CO) as a representative combustion product, injected at three locations in the straight duct and two locations (centre and side) in the exhaust hoods. Simulations predict that, in isolation, neither a straight duct without baffles, nor a hood with a 90° elbow followed by a straight duct without baffles, provide sufficient mixing to achieve a near uniform distribution of CO at the sampling locations. However, simulations show that adequate mixing of dilution air and CO is achieved with baffles-induced flow detachment and recirculation, not from turbulent mixing in the straight section of the duct itself. The simulations also suggest that elbows, baffles, expansions or other geometrical features are needed to induce thorough mixing. For example, in the Stove Testing Lab at LBNL, flow disturbance is induced by an expansion into a larger diameter straight duct immediately downstream of the hood and the 90° elbow. Although these two systems demonstrate sufficient mixing of CO within the exhaust, the RANS simulations in this study suggest that other systems relying solely on mixing within a specified duct length (viz. 8–12 diameters) may not be sufficient. Refereed/Peer-reviewed

In the Meyer-Burger labs, pilot production of its proprietary 6''-Heterojunction (HJT) cells has been conducted on full-scale production tools (Roth & Rau Helia PECVD & Helia PVD). Overall, close to 10.000 cells have been manufactured with efficiencies up to 21,1%. From theses HJT cells, 60-cell modules have been produced. Temperature coefficient measurements of both cells and modules have been conducted by independent institutes, resulting in outstanding -0,20%/K and -0,22%/K, respectively. The modules have been deployed on an outdoor test field in Mid-European climate conditions for over 1 year. The results demonstrate the durability of the HJT modules and comparison with standard crystalline modules show an increase of energy yield of up to 7% on sunny days already in spring time. Under hot climate conditions in southern regions this increase is supposed to be even higher, making HJT modules extremely suitable for southern climates and low LCOE´s. 28th European Photovoltaic Solar Energy Conference and Exhibition; 1887-1889

A highly efficient nonlinear frequency-domain solution method is proposed and employed to investigate the aerodynamic and aeromechanical performances of an oscillating wind turbine blade aerofoil in this study. Extensive validations of a frequency-domain method against an experiment as well as a typical time-domain solution method are provided in this paper. An experiment is also designed and conducted to measure pressure distributions over an aerofoil as well as to validate the numerical model. Unsteady pressure distributions and aeroelasticity parameters of the oscillating NACA0012 aerofoil are computed at various angles of attack and Reynolds numbers. Results indicate that the difference of unsteady pressure distributions between the two surfaces of the aerofoil becomes larger as the angle of attack is increased, whereas the flow separation on the suction surface is reduced by raising the Reynolds number. The turbulent flow develops in the downstream region due to the laminar vortex shedding at lower Reynolds numbers. It is also revealed that the Reynolds number has an impact on the aeroelasticity, and the aerodynamic damping value is larger at higher Reynolds numbers. The comparison between the frequency-domain method and the time-domain method shows that the frequency-domain method is not only accurate but also computationally very efficient as the computation time is reduced by 90%.

LDPE and HDPE are common materials used within high voltage insulation systems. These materials will be aged after working under high voltage for a long time. The ageing process of these materials may be affected by external factors. The application of repetitive lightning impulse over-voltages is one of these factors and will be considered in this paper. This paper includes the sample preparation process, the ageing of samples under identical conditions and finally the analysis of electrical properties after the ageing process. The obtained results are used to compare the effect of repetitive lightning impulses with these two materials. These results are also used to highlight the possible mechanisms behind the lighting impulse ageing process.

Successful cap and trade programs for SO2 and NOx in the US allocate allowances to large emitters based on a historic base line for a period of up to thirty years. National Allocation Plans in Europe allocate CO2 allowances in an iterative approach first for a three then for a five-year period. The potential updating of the base line creates perverse incentives for operation and investment. Some allowances are also reserved for new entrants further distorting the scheme. We use analytic models and numeric simulations for the UK power sector to illustrate and quantify how these effects contribute to an inflation of the allowance price while reducing utilisation and investment in efficient technologies. The inflated allowance prices are likely to increase the European allowance budget and emissions, e.g. through the Linking Directive. As a result opportunity costs of emitting CO2 are reduced relative to an efficient cap and trade program.

Comparative analysis of three stabilization mechanisms of unstable states of physical systems is presented in this review. These mechanisms are: the quantum Zeno effect, the stabilization of unstable states in an external fast oscillating field (at the example of Kapitza pendulum), and the algorithm called as the principle of whirligig. The common features of these mechanisms, as well as the differences between them, are defined in the paper. In particular, it is shown that the stabilization of quantum systems is possible without involvement of such a notion as the collapse of the wave function. For stabilization there is enough to have such a stabilizing radiation flow when the Rabi frequency of transitions does exceed some frequency. This particular frequency is a magnitude inverse-ly proportional to the lifetime of the state under stabilization. It is shown that stabilization of unstable states by impact of rapidly oscillating forces occurs by non-self-consistent exposure, i.e. the dynamics of stabilizing field is independent of the dynamics of the stabilized state. Stabilization with the principle of whirligig does occur by self-consistent forces, and thus, in many cases stabilization by the use of the principle of whirligig can be more effective.

Chaos and self-similarity are the state-of-the-art problems in various areas of modern science and technology, thus network systems are not exception from this rule. Increasing number of various network protocols, applications and services leads to the fact that network traffic becomes more complex and unpredictable. It has been shown that phenomenon of self-similarity is caused by the properties of network traffic whose origin is the behavior of ТСР protocol. And all this properties became more significant with appearing of the high-speed data transmission technologies. Finally this behavior leads to congestion in network and packet losses as the result of it. But even modern congestion control mechanisms handle such kind of situations quite unfair. For example, as shown by W. Feng et al., TCP Reno loss rate exceeds 5% in a heavily congested network. So it’s easy to calculate that over a Gigabit Ethernet link such loss rate translates into a loss of over 50 Mb/s. Obviously this level of loss rate is unacceptable. However models that describe behavior of information systems sufficiently and give a possibility for scientists to apply all set of classical methods of chaos theory and analyze particular nonlinear dynamical system have not been offered so far. Phase portraits of the studied system were built and Lyapunov exponents for different values of the basic system parameters were calculated. In the present paper a new approach in analysis of the packet switching networks behavior with ТСР protocol is proposed. These networks are analyzed as nonlinear dynamical systems that show chaotic properties at a certain value of parameters.

This paper reports on the long-term objectives and current research results of the on-going Renewable Energy to Africa (REAfrica) project. The purpose of the REAfrica project is to increase knowledge of renewable energy solutions and markets in Sub-Saharan Africa in order to support Finnish renewable energy sector companies in entering the African market. Entry into a new geographical area also involves entry into a new business culture. This paper considers the potential for collaboration and networking with local partners in both business and research as a means of fostering business innovation. To achieve this, it is proposed that research collaboration needs to evolve as ecosystem-level collaboration on three levels - business, research and governmental - in order to create a 'piloting gateway' for new technologies.