• Energy Research
• 2021-2025close
• 7. Clean energy close
• 12. Responsible consumption close
• US close
• AU close

Abstract Dimethyl ether appears to be a better choice among various diesel alternatives due to its high cetane number and sootless combustion. However, the physical and chemical properties of dimethyl ether are very different from those of diesel. The physical properties influence spray formation and atomization characteristics, while chemical properties determine combustion and emission formation characteristics. Thus, fuel's physical and chemical properties significantly determine engine performance and emissions. In the present work, spray combustion and emission formation characteristics of n-heptane, dimethyl ether, and their blends (10, 25, and 50% dimethyl ether in n-heptane) were numerically studied in a constant volume chamber. Results show that the n-heptane spray combustion has the highest heat release rate with an intense premix combustion phase, whereas dimethyl ether spray combustion has the lowest heat release rate and shortest premix combustion phase. The magnitude of the premixed phase and heat release rate decreases with the increase in dimethyl ether mass fraction in the blends. Soot, carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NO) emissions decreased with the increase in the dimethyl ether mass fraction in the blends and were lowest for the dimethyl ether.

Abstract Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Additionally, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

Global sensitivity analysis (GSA) of distribution system with respect to stochastic PV and load variations plays an important role in designing optimal voltage control schemes. This paper proposes a data-driven framework for GSA of distribution system. In particular, two representative surrogate modeling-based approaches are developed, including the traditional Gaussian process-based and the analysis of variance (ANOVA) kernel ones. The key idea is to develop a surrogate model that captures the hidden global relationship between voltage and real and reactive power injections from the historical data. With the surrogate model, the Sobol indices can be conveniently calculated through either the sampling-based method or the analytical method to assess the global sensitivity of voltage to variations of load and PV power injections. The sampling-based method estimates the Sobol indices using Monte Carlo simulations while the analytical method calculates them by resorting to the ANOVA expansion framework. Comparison results with other model-based GSA methods on the unbalanced three-phase IEEE 37-bus and 123-bus distribution systems show that the proposed framework can achieve much higher computational efficiency with negligible loss of accuracy. The results on a real 240-bus distribution system using actual smart meter data further validate the feasibility and scalability of the proposed framework.

The Houston-Dallas (I-45) corridor is the busiest route among 18 traffic corridors in Texas, USA. The expected population growth and the surge in passenger mobility may result in a significant impact on the regional environment. This study uses a life cycle framework to predict and evaluate the net changes of environmental impact associated with the potential development of a high-speed rail (HSR) System along the I-45 corridor through its life cycle. The environmental impact is estimated in terms of CO2 and greenhouse gas (GHG) emissions per vehicle/passenger-kilometers traveled (V/PKT) using life cycle assessment. The analyses are performed referring to the Ecoinvent 3.4 inventory database through the phases: material extraction and processing, infrastructure construction, vehicle manufacturing, system operation, and end of life. The environmental benefit is evaluated by comparing the potential development of the HSR system with those of the existing transportation systems. The vehicle component, especially operation and maintenance of vehicles, is the primary contributor to the total global warming potential with about 93% of the life cycle GHG emissions. For the infrastructure component, 56.76% of GHG emissions result from the material extraction and processing phase (23.75 kgCO2eq/VKT). Various life cycle emissions of HSR except PM are significantly lower than for passenger cars.

Global wind resources greatly exceed current electricity demand and the levelized cost of energy from wind turbines has shown precipitous declines. Accordingly, the installed capacity of wind turbines grew at an annualized rate of about 14% during the last two decades and wind turbines now provide ~6–7% of the global electricity supply. This renewable electricity generation source is thus already playing a role in reducing greenhouse gas emissions from the energy sector. Here we document trends within the industry, examine projections of future installed capacity increases and compute the associated climate change mitigation potential at the global and regional levels. Key countries (the USA, UK and China) and regions (e.g., EU27) have developed ambitious plans to expand wind energy penetration as core aspects of their net-zero emissions strategies. The projected climate change mitigation from wind energy by 2100 ranges from 0.3–0.8 °C depending on the precise socio-economic pathway and wind energy expansion scenario followed. The rapid expansion of annual increments to wind energy installed capacity by approximately two times current rates can greatly delay the passing of the 2 °C warming threshold relative to pre-industrial levels. To achieve the required expansion of this cost-effective, low-carbon energy source, there is a need for electrification of the energy system and for expansion of manufacturing and installation capacity.

Abstract Integration of solar photovoltaic (PV) and battery storage systems is an upward trend for residential sector to achieve major targets like minimizing the electricity bill, grid dependency, emission and so forth. In recent years, there has been a rapid deployment of PV and battery installation in residential sector. In this regard, optimal planning of PV-battery systems is a critical issue for the designers, consumers, and network operators due to high number of parameters that can affect the optimization problem. This paper aims to present a comprehensive and critical review on the effective parameters in optimal planning process of solar PV and battery storage system for grid-connected residential sector. The key parameters in process of optimal planning for PV-battery system are recognized and explained. These parameters are economic and technical data, objective functions, energy management systems, design constraints, optimization algorithms, and electricity pricing programs. A timely review on the state-of-the-art studies in PV-battery optimal planning is presented. The challenges, trends and latest developments in the topic are discussed. At the end, scopes for future studies are developed. It is found that new guidelines should be provided for the customers based on various electricity rates and demand response programs. Also, several design considerations like grid dependency and resiliency need further investigation in the optimal planning of PV-battery systems.

AbstractThe adoption of a bioenergy crop is affected by various factors, including but not limited to the characteristics of farmers, farm economics, market forces, and physical environment. This study develops a spatially explicit agent‐based model for ascertaining the adoption rate of carinata (Brassica carinata) among the farmers in the Little River Experimental Watershed located in the southern state of Georgia in the United States. Each farmer's adoption behavior is modeled using the profitability difference between traditional crop rotations (with and without carinata at different contract prices), the adoption rate of neighboring farmers, and their land allocation decisions from managing a risky portfolio of enterprises. Carinata production in the winter season once every 3 years has no conflict with the most profitable and popular traditional row crop rotations, such as cotton‐cotton‐cotton and cotton‐cotton‐peanut, to a larger extent. The results show that 28% and 85% of farmers in the watershed will adopt carinata after 33 years at a contract price of $13/bushel (bu) under two different assumptions of low (2.5%) and high (5%) initial neighborhood adoption rates. The proportions of land allocated to carinata to the total farmland under field crops are 38% and 85% after 33 years under the same low and high neighborhood adoption rates, respectively. Our results suggest that fixing the appropriate contract price of carinata will bring additional profits to farmers without any significant foreseeable agronomic risks, thereby increasing the adoption rate of carinata at a regional level.

Abstract Kenya has made considerable policy efforts to expand its renewable energy portfolio to meet energy demand and mitigate greenhouse gas (GHG) emissions. Development of proper policies requires a robust framework for analyzing the benefits of renewable energy investments. Towards this end, this study applied a choice experiment analysis to determine how attributes (type of energy, ownership, impact on environment, distance and visibility, community job creation, and yearly renewable energy tax) impact the public willingness to pay for renewable energy development in Kenya. A nationwide survey of 1020 households was conducted in nine counties using conditional logit (MNL) and random parameter logit (RPL) frameworks. The results reveal that the Kenyan public places a high value on environmental impact, followed by type of renewable energy and community job creation, respectively. On the other hand, respondents do not place much emphasis on ownership or distance and visibility. Policy simulation suggests that while renewable energy adoption is highly valued by households, the total willingness to pay is not enough to cover the higher capital cost for the development of various renewable energy technologies.