• Energy Research
• Restricted close
• Embargo close
• 13. Climate action close
• 7. Clean energy close
• 6. Clean water close
• BD close

The drought prone North-West Bangladesh is vulnerable to the impacts of climate change, particularly because of less water availability in the dry period and high water requirement for crop production. Improved understanding of recent changes in crop water demand in the dry season is important for the water resources management in the region. A study was carried out to determine the potential impacts of recent climate change during last three decades on trends of water requirements of Boro rice. The reference crop evapotranspiration (ETo), potential crop water requirement (∑ETC), effective rainfall during the crop growing period (ER), potential irrigation requirement for crop evapotranspiration (∑ETC − ER) and net irrigation requirement of Boro rice were estimated using observed daily climate data in the CropWat model for the period of 1980 to 2013 for four North-West districts. Significant decreasing trends of ETo were observed in most of the dry months due to increasing relative humidity and decreasing wind-speed and sun-shine hours. The results showed decreasing trends of potential crop water requirement, i.e. the total crop evapotranspiration (∑ETC), of Boro rice due to decreasing reference crop evapotranspiration and shorter crop growing periods. The variations in trends of potential irrigation requirement for crop evapotranspiration (∑ETC − ER) found among different districts, are mainly linked to variations in trends of changes in effective rainfall. The net irrigation requirement of Boro rice has decreased, by 11% during the last three decades at an average rate of −4.4 mm year−1, instead of decreasing effective rainfall, mainly because of high rate of decrease of crop evapotranspiration (−5.9 mm year−1). Results indicate that a warming climate does not always result in higher agricultural water use and that climate change can also result in reduced water demands because of changes in humidity, wind-speed and sun-shine hours.

Envisioning the future city as the outcome of planned development, several master and strategic plans for Dhaka were prepared. However, these plans, do not adequately address the well-known and combined effects of climate change and unplanned urbanization on urban flooding. Additionally, the spatial planning component is missing in adaptation planning, which broadly concentrates on the climate change. Long-term adaptation strategies should consider both the temporal and spatial extent of flooding. Uncertainties in climate change and urbanization will induce planning failure beyond the Adaptation Tipping Point for flooding exceeding the thresholds of the bio-physical system or the acceptable limits of societal preference. In this paper, a shift is proposed from the current planning practice of single-dimensional ‘Predict and Act’ towards a more resilience-based ‘Monitor and Adapt’ approach. It is prudent to visualize the effects of urbanization and climate change and translate them into strategies for improved adaptation based spatial planning. Here, Dhaka's exposure to floods under different climate change and urban (planned and unplanned) development scenarios is assessed based on acceptable thresholds obtained from plans (top-down defined) and stakeholders (bottom-up perspectives). The scale of effects of these two drivers on urban flooding is exhibited through the zone differentiated flooding extent. While apparently the effect of climate change on flooding is greater than that of unplanned urban developments, both play an important role in instigating tipping points and intensifying risks.

Mitigation of carbon dioxide emissions has become an utmost important global agenda, keeping into consideration the associated environmental hardships. As a result, it is important to unearth the factors which can neutralize carbon emissions to transform the world economy into a low-carbon one. Against this backdrop, this study explores the carbon dioxide neutralizing effects of economic growth, international tourism, clean energy promotion, and technological innovation in the context of five European Union (EU-5) nations during the 1990-2015 period. This study's main contribution is in terms of its approach to test the interaction effect between foreign direct investment (FDI) inflows and energy innovation on carbon dioxide emissions. The econometric analysis chronologically involves the employment of unit root, cointegration, causality, and regression methods. Overall, the findings support the inverted-U-shaped economic growth-carbon dioxide emissions nexus to verify the Environmental Kuznets Curve (EKC) hypothesis. Besides, the Pollution Haven Hypothesis in the context of the selected panel is also verified as higher FDI inflows are seen to boost the carbon dioxide emission levels. The results also confirm that energy innovation moderates the harmful effect of air transport (a proxy for international tourism) on carbon dioxide emissions during the developing stage of the tourism industry. On the other hand, renewable energy promotion is found to curb carbon dioxide emissions. These findings suggest that the European governments need to enhance investments in their respective renewable energy sectors and simultaneously ensure the development of clean industries, which can collectively help these nations become carbon-neutral in the future.

One of the most fascinating characteristics of perovskite solar cells (PSCs) is the retrieved obtainment of outstanding photovoltaic (PV) performances withstanding important device configuration variations. Here we have analyzed CH3NH3PbI3-xClx in planar or in mesostructured (MS) configurations, employing both titania and alumina scaffolds, fully infiltrated with perovskite material or presenting an overstanding layer. The use of the MS scaffold induces to the perovskite different structural properties, in terms of grain size, preferential orientation, and unit cell volume, in comparison to the ones of the material grown with no constraints, as we have found out by X-ray diffraction analyses. We have studied the effect of the PSC configuration on photoinduced absorption and time-resolved photoluminescence, complementary techniques that allow studying charge photogeneration and recombination. We have estimated electron diffusion length in the considered configurations observing a decrease when the material is confined in the MS scaffold with respect to a planar architecture. However, the presence of perovskite overlayer allows an overall recovering of long diffusion lengths explaining the record PV performances obtained with a device configuration bearing both the mesostructure and a perovskite overlayer. Our results suggest that performance in devices with perovskite overlayer is mainly ruled by the overlayer, whereas the mesoporous layer influences the contact properties.

Escalating energy costs are an increasing concern for South Asian farmers growing rice and wheat in rotation. Millions of people in the IGP (Indo-Gangetic Plains) depend on this cropping system for food and income security. CT (conservation tillage) practices, including mechanical BP (bed planting), PTOS (power-tiller operated seeding), and ST (strip tillage), are advocated by donors and development organizations as profitable, high yielding, and energy-efficient alternatives to TT (traditional tillage). However, most studies on the EUE (energy input use efficiency) of CT originate from researcher-controlled and on-station experiments. Comparatively little information is available on the EUE of CT practices as farmers apply them in their own fields, and under their own management decisions. This research responds to this gap, and analyzes EUE of each of these three CT options, compared to TT, by surveying 328 rice-wheat farmers in north-western Bangladesh. Concentrating on wheat production, we employed a non-parametric benchmarking technique involving slack-based measures of technical efficiency, along with a fractional regression model to identify and compute the wasteful use of energy. PTOS achieved the highest EUE score (0.92), followed closely by BP and ST (both 0.91), whereas TT (0.68) was significantly (p <0.001) different and lower than the CT practices.

Many studies have examined the impact of climatic variability on agricultural productivity, although an understanding of these effects on farmland values and their relationship to farmers’ decisions to adapt and modify their land-use practices remains nascent in developing nations. We estimated the impacts of the deviation in our study year's (2012) temperature and precipitation patterns from medium-term (1980–2011) climatic patterns on farmland values in Pakistan. This was accomplished by employing a modified form of a Ricardian regression model. We also examined farmers’ perceptions of climate change during this period, as well as their perceptions of climate change impacts on farm productivity, in addition to past and anticipated farm adaptation strategies. Our results indicate that positive temperature deviation from the medium-term mean – indicative of climatic change – affects farmland values in Pakistan. Deviation in annual cumulative precipitation conversely appears to have no significant impact. Estimates of the marginal impact of temperature deviation suggested a slight but negative linear relationship with farmland values. The location of farms in areas where farmers can avail financial or extension services conversely had a positive impact on farmland values, as did the availability of irrigation facilities. Our analysis of farmers’ perceptions of climate change and their consequent adaptation behavior indicated a relatively high degree of awareness of climatic variability that influenced a number of proactive and future anticipated farm adaptation strategies. Examples included increased use of irrigation and farm enterprise diversification, as well as land-use change, including shifting from agriculture into alternative land uses. National policy in Pakistan underscores the importance of maintaining a productive rural agricultural sector. Our findings consequently highlight the importance of appropriate adaptation strategies to maintain both farm productivity and farmland values in much of Pakistan. The implications of increased extension and financial services to enhance farmers’ potential for climate change adaptation are discussed.

Biochar has potentials for soil fertility improvement, climate change mitigation and environmental reclamation, and charred biomass can be deliberately incorporated into soil for long-term carbon stabilization and soil amendment. Many different methods have been used for biochar production ranging from laboratory to industrial scales. However, in countryside of developing countries, biomass is generally used for cooking but not charred. Biochar production techniques at farmer scale have remained poorly developed. We developed and tested biochar production kilns for farmers with a dimension of 50.8 cm × 38.1 cm (height × diameter), using three different setups for optimizing oxygen (O2) limitation and syngas circulation: airtight with no syngas circulation (Model I), semi-airtight with external syngas circulation (Model II) and semi-airtight with internal syngas circulation (Model III). A comparative assessment of these biochar production kiln models was made considering biochar pyrolysis time, fuel to biomass ratio, biochar to feedstock ratio and thermogravimetric index (TGI). Among the models, the best quality biochar (TGI = 0.15) was obtained from Model I kiln taking the longest time for pyrolysis (12.5 h) and the highest amount of fuel wood (1.22 kg kg-1 biomass). Model III kiln produced comparatively good quality biochar (TGI = 0.11), but with less fuel wood requirement (0.33 kg kg-1 biomass) and shorter pyrolysis time (8.5 h). We also tested Model III kiln in a three times larger size under two situations (steel kiln and pit kiln). The biochar to feedstock ratio (0.38) and quality (TGI = 0.14) increased slightly for the larger kilns. Quality of biochar was found to be mainly related to pyrolysis time. The costs for the biochar stove and pit kiln were US$ 65-77, while it was US$ 154 for the large size steel kiln. Model III kiln can potentially be used for both cooking and biochar production at farmer scale.