• Energy Research
• Restricted close
• BE close
• AU close

Urban environments provide opportunities for greater resource efficiency and the fostering of urban ecosystems. Brownfield areas are a typical example of underused land resources. Brownfield redevelopment projects that include green infrastructure allow for further ecosystems to be accommodated in urban environments. Green infrastructure also deliver important urban ecosystem services (UES) to local residents, which can greatly contribute to improving quality of life in cities. In this case study, we quantify and assess the economic value of five UES for a brownfield redevelopment project in Antwerp, Belgium. The assessment is carried out using the “Nature Value Explorer” modelling tool. The case includes three types of green infrastructure (green corridor,infiltration gullies and green roofs) primarily intended to connect nature reserves on the urban periphery and to avoid surface runoff. The green infrastructure also provides air filtration, climate regulation, carbon sequestration and recreation ecosystem services. The value of recreation far exceeds other values, including the value of avoided runoff. The case study raises crucial questions as to whether existing UES valuation approaches adequately account for the range of UES provided and whether such approaches can be improved to achieve more accurate and reliable value estimates in future analyses.

Abstract Silicon carbide-based filter elements were catalytically activated to provide filter elements for catalytic tar removal from biomass-derived syngas. The filter element support was coated with CeO 2 , CaO–Al 2 O 3 and MgO with a specific surface of 7.4, 15.9 and 21.9 m 2 /g synthesized by exo-templating with activated carbon. Doping of a MgO coated filter element with 60 wt% NiO has led to an increase of the specific surface from 0.15 to 0.21 m 2 /g, whereas in case of a MgO–Al 2 O 3 coated filter element a decrease from 1.18 to 0.91 m 2 /g was found. An increase of the NiO loading from 6 to 60 wt% on a MgO coated filter element resulted in an increase of the naphthalene conversion from 91 to 100% at 800 °C and a face velocity of 2.5 cm/s at a naphthalene concentration of 5 g/Nm 3 in model biomass gasification gas. In case of a MgO–Al 2 O 3 coated filter element with 60 wt% NiO in addition to complete naphthalene conversion in the absence of H 2 S, a higher conversion of 66% was found in the presence of 100 ppmv H 2 S compared to 49% of the MgO–NiO coated filter element. After scaling up of the catalytic activation procedure to a 1520 mm long filter candle, which shows an acceptable differential pressure of 54.9 mbar, 58 and 97% naphthalene conversion was achieved in the presence and absence of H 2 S, respectively. The calculated WHSV value of 209.6 Nm 3 h −1 kg −1 indicates the technical feasibility of a further increase of the catalytic performance by an increase of the NiO loading.

Samples of two hundred finger‐ and toenails cultured after a 70% alcohol disinfection for 2 min were compared with non‐disinfected samples cultured on a classical way. Alcohol treatment caused a significant decrease in isolation of yeast and moulds. Both organisms were cultivated at 25.5 and 31%, respectively, when not treated with alcohol, whereas the isolation rate dropped to 10 and 17.5%, respectively, after alcohol treatment. Isolation of dermatophytes decreased from 27.5 to 23.5% when alcohol disinfection was used. In conclusion, although alcohol disinfection of nail samples in the laboratory effectively decreases the isolation rate of unwanted contaminants on Sabouraud glucose agar without cycloheximide, it hampers the isolation of dermatophytes and pathogenic yeasts on cycloheximide‐containing media.

There is a growing need to assist those who have suffered an amputation due to vascular diseases, especially in those who have general lower limb weakness and need additional assistance to retain independence and overall quality of life. The CYBERLEGs system is a new artificial physical and cognitive lower-limb replacement system for dysvascular transfemoral amputees intended for assistance in activities of daily living. By lowering the cognitive and metabolic effort of using a prosthetic system, CYBERLEGs is intended to increase the number of amputees using prosthetic systems as well as expand the capabilities of those who use currently available technology.

This paper introduces an adaptive current control strategy for DC-DC boost converters without input-output voltage sensing. In addition, accurate current control is achieved in the presence of dynamical uncertainties. Unlike many controllers available for DC-DC converters, the adaptive controller's stability is guaranteed by Lyapunov stability theory. A comparison to PI counterpart has been carried out. Results show higher performance, which lead to more efficient operations of DC-DC converters.

Abstract In this study, the external surface of a finned tube was coated by 13X zeolite powder, and the CO2 adsorption equilibrium and dynamics were investigated experimentally. A slurry consisting of dionized water, 13X zeolite powder, and Acrylic latex emulsion (ALE) was used to coat the finned tube. The finned tube was coated by deep coating method. The equilibrium isotherms were measured at the range of 20–90 °C and fitted well by the dual-site Langmuir model. The average difference between the model and the results obtained from the experiments is about 2.5%. The nitrogen adsorption/desorption at 77 K was used for characterization of adsorbents. A 11% reduction was observed in pore volume and surface area. The dynamic test showed that the desorption of adsorbed CO2 takes place in about 14 s which is an order of magnitude faster than the fastest developed method. A conservative criterion was developed for estimating adsorbent working capacity. This criterion showed that the working capacities of the adsorbent are about 80% of its ideal values.

Abstract The present paper proposes a way to introduce chemical reactions in composite curves, in such a way that the irreversibility’s generated by the chemical reaction are expressed as equivalent thermal diffusion. The heat of reaction is considered to be released at a “reversible reaction temperature” and the diffusion between this reversible temperature and the actual temperature generates the actual exergy destruction. Corresponding hot and cold curve contributions result in the composite curves, which visualizes the exergy destruction and the chemical pinches which are present in the exchanger and reactor network. The concept is illustrated through an application on chemical recuperation in a gas turbine cycle.