• Energy Research
• Closed Access close
• natural sciences close
• US close
• QA close
• BH close

Impulsive stress in repeated shock waves administered during extracorporeal shock-wave lithotripsy (ESWL) causes injury to kidney tissue. In a study of the mechanical input of ESWL, the effects of focused shock waves on thin planar polymeric membranes immersed in a variety of tissue-mimicking fluids have been examined. A direct mechanism of failure by shock compression and an indirect mechanism by bubble collapse have been observed. Thin membranes are easily damaged by bubble collapse. After propagating through cavitation-free acoustically heterogeneous media (liquids mixed with hollow glass spheres, and tissue) shock waves cause membranes to fail in fatigue by a shearing mechanism. As is characteristic of dynamic fatigue, the failure stress increases with strain rate, determined by the amplitude and rise time of the attenuated shock wave. Shocks with large amplitude and short rise time (i.e., in uniform media) cause no damage. Thus the inhomogeneity of tissue is likely to contribute to injury in ESWL. A definition of dose is proposed which yields a criterion for damage based on measurable shock wave properties.

Impulsive stress in repeated shock waves administered during extracorporeal shock-wave lithotripsy (ESWL) causes injury to kidney tissue. In a study of the mechanical input of ESWL, the effects of focused shock waves on thin planar polymeric membranes immersed in a variety of tissue-mimicking fluids have been examined. A direct mechanism of failure by shock compression and an indirect mechanism by bubble collapse have been observed. Thin membranes are easily damaged by bubble collapse. After propagating through cavitation-free acoustically heterogeneous media (liquids mixed with hollow glass spheres, and tissue) shock waves cause membranes to fail in fatigue by a shearing mechanism. As is characteristic of dynamic fatigue, the failure stress increases with strain rate, determined by the amplitude and rise time of the attenuated shock wave. Shocks with large amplitude and short rise time (i.e., in uniform media) cause no damage. Thus the inhomogeneity of tissue is likely to contribute to injury in ESWL. A definition of dose is proposed which yields a criterion for damage based on measurable shock wave properties.

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Abstract Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Additionally, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

Abstract Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Additionally, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

Consumer interest in food products, including fresh vegetables, with health promoting properties is rising. In fresh vegetables, these properties include vitamins, minerals, dietary fiber, and secondary compounds, which collectively impart a large portion of the dietary, nutritional or health value associated with vegetable intake. Many, including farmers, aim to increase the health-promoting properties of fresh vegetables on the whole but they face at least three obstacles. First, describing crop composition in terms of its nutrition-based impact on human health is complex and there are few, if any, accepted processes and associated metrics for assessing and managing vegetable composition on-farm, at the origin of supply. Second, data suggest that primary and secondary metabolism can be 'in conflict' when establishing the abundance versus composition of a crop. Third, fresh vegetable farmers are rarely compensated for the phytochemical composition of their product. The development and implementation of a fresh vegetable 'nutritional yield' index could be instrumental in overcoming these obstacles. Nutritional yield is a function of crop biomass and tissue levels of health-related metabolites, including bioavailable antioxidant potential. Data from a multi-factor study of leaf lettuce primary and secondary metabolism and the literature suggest that antioxidant yield is sensitive to genetic and environmental production factors, and that changes in crop production and valuation will be required for fresh vegetable production systems to become more focused and purposeful instruments of public health.

Consumer interest in food products, including fresh vegetables, with health promoting properties is rising. In fresh vegetables, these properties include vitamins, minerals, dietary fiber, and secondary compounds, which collectively impart a large portion of the dietary, nutritional or health value associated with vegetable intake. Many, including farmers, aim to increase the health-promoting properties of fresh vegetables on the whole but they face at least three obstacles. First, describing crop composition in terms of its nutrition-based impact on human health is complex and there are few, if any, accepted processes and associated metrics for assessing and managing vegetable composition on-farm, at the origin of supply. Second, data suggest that primary and secondary metabolism can be 'in conflict' when establishing the abundance versus composition of a crop. Third, fresh vegetable farmers are rarely compensated for the phytochemical composition of their product. The development and implementation of a fresh vegetable 'nutritional yield' index could be instrumental in overcoming these obstacles. Nutritional yield is a function of crop biomass and tissue levels of health-related metabolites, including bioavailable antioxidant potential. Data from a multi-factor study of leaf lettuce primary and secondary metabolism and the literature suggest that antioxidant yield is sensitive to genetic and environmental production factors, and that changes in crop production and valuation will be required for fresh vegetable production systems to become more focused and purposeful instruments of public health.

Plants exhibit plasticity in response to their current environment and, in some cases, to that of the previous generation (i.e. maternal effects). However, few studies have evaluated both within- and between-generation plasticities and the extent to which they interact to influence fitness, especially in natural environments. The plasticity of adult traits to two generations of natural differences in light was determined for Campanulastrum americanum, a forest-edge herb that expresses annual and biennial life histories. Plasticity was found to an individual's light environment (within generation) and the maternal light environment (between generations). Responses to ambient light for size traits and timing of flowering were probably passive, whereas apparently adaptive responses were found for light acquisition traits. Maternal light influenced the expression of most adult traits but had the strongest effect when plants were germinated in natural environments. The transgenerational effects of light were consistent with adaptive plasticity for several traits. Plastic within-generation changes in flowering time may also result in adaptive between-generation effects by altering the offspring life history schedule. Finally, the results underscore the importance of conducting studies of within- and between-generation plasticity in natural populations, where the environmental context is relevant to that in which the traits evolved.