• Energy Research
• 11. Sustainability close
• 12. Responsible consumption close
• 2. Zero hunger close
• CA close
• AE close
• Energies close

Despite global efforts to reduce greenhouse gas emissions, the energy sector remains a major contributor, with hydrocarbon-based resources fulfilling around 80% of energy needs. As such, there is a growing focus on identifying effective and economically feasible policy mechanisms to promote renewable energy adoption. This study focuses on the theoretical problems surrounding the adoption of renewable energy policies. The study aims to highlight the potential for sustainable growth using renewable energy in the UAE and identify the most viable policy mechanisms for enhancing grid-tied solar energy adoption using qualitative and quantitative data collection methods and the HOMER Grid software. Compared to previous research, this study contributes by identifying a unified renewable energy policy mechanism that could significantly enhance the adoption of grid-tied solar energy generation in the UAE. The study’s main findings show that a unified renewable policy mechanism could enhance grid-tied solar energy adoption throughout the UAE’s electricity authorities. Net metering emerges as the most efficient and economically viable policy for customers and electricity utilities.

The campus of the Karlsruhe Institute of Technology (KIT) contains several waste heat streams. In an effort to reduce greenhouse gas emissions by optimizing thermal power consumption on the campus, researchers at the KIT are proposing a ‘DeepStor’ project, which will sequester waste heat from these streams in an underground reservoir during the summer months, when the heat is not required. The stored heat will then be reproduced in the winter, when the campus’s thermal power demand is much higher. This paper contains a preliminary geochemical risk assessment for the operation of this subsurface, seasonal geothermal energy storage system. We used equilibrium thermodynamics to determine the potential phases and extent of mineral scale formation in the plant’s surface infrastructure, and to identify possible precipitation, dissolution, and ion exchange reactions that may lead to formation damage in the reservoir. The reservoir in question is the Meletta Beds of the Upper Rhein Graben’s Froidefontaine Formation. We modeled scale- and formation damage-causing reactions during six months of injecting 140 °C fluid into the reservoir during the summer thermal storage season and six months of injecting 80 °C fluid during the winter thermal consumption season. Overall, we ran the models for 5 years. Anhydrite and calcite are expected mineral scales during the thermal storage season (summer). Quartz is the predicted scale-forming mineral during the thermal consumption period (winter). Within ~20 m of the wellbores, magnesium and iron are leached from biotite; calcium and magnesium are leached from dolomite; and sodium, aluminum, and silica are leached from albite. These reactions lead to a net increase in both porosity and permeability in the wellbore adjacent region. At a distance of ~20–75 m from the wellbores, the leached ions recombine with the reservoir rocks to form a variety of clays, i.e., saponite, minnesotaite, and daphnite. These alteration products lead to a net loss in porosity and permeability in this zone. After each thermal storage and production cycle, the reservoir shows a net retention of heat, suggesting that the operation of the proposed DeepStor project could successfully store heat, if the geochemical risks described in this paper can managed.

Biogas technology is an important alternative energy source worldwide. Blackwater and kitchen refuse represent ideal waste streams for bioenergy recovery through anaerobic co-digestion. Modeling of the biokinetics of anaerobic digestion on several aspects, such as microbial activity, substrate degradation, and methane production, from co-digestion of black water (BW) and kitchen refuse (KR) was the objective of this research. A mathematical model was developed towards a simulation based on mass balances on biomass, the organic substrate, and biogas. The model was implemented in INSEL and experimental data from the literature were used for model validation. The study shows that the simulation results fit well with the experimental data. The energy consumption and generation potential of anaerobic co-digestion of BW and KR were calculated to investigate if the produced biogas could supply the digester’s energy demand. This study can be used to pre-design anaerobic digestion systems in eco-districts.

The global energy sector is in a period of transition, during which time it is expected that renewable and low-carbon energy sources, such as wind and solar, will replace traditional fossil fuels, including oil, gas, and coal. The energy transition is happening not only to limit the environmental impact of fossil fuel production and consumption but also to ensure energy security, reliability, access, affordability, and sustainability. The importance of the energy transition has been amplified by recent events, notably the Russian-Ukraine conflict. Economic, financial, and trade sanctions against Russia, and in particular its oil and gas industry, have forced countries to find new suppliers in the short term, but also to investigate new and more sustainable sources to guarantee long-term energy security. Given the importance of energy, it is perhaps not unexpected that there is a considerable body of recent academic literature, particularly over the last 4–5 years, studying what industries, consumers, governments, and markets can do to help bring about a faster energy transition. In this paper, we provide a review of the literature that pertains to the economic aspects of the energy transition. While our initial search of the literature is targeted at uncovering all relevant articles on the subject, we focus most of our discussion on the most influential articles in prominent journals and articles published in this journal—Energies. This review is intended to help identify active topics and potential research gaps and provide future direction, so we hope it will prove useful to the readers and authors interested in this topic.

Solar home systems (SHSs) are successfully addressing energy access deficits across the globe, particularly when combined with pay-as-you-go (PAYG) payment models, allowing households to pay for energy services in small instalments. To increase energy access, it is vital to understand the PAYG SHS customer journey in depth. To aid this, the paper presents unique data from active customers, consisting of structured interviews (n = 100) and two focus groups (n = 24) across two districts in Rwanda. These results are presented under a novel customer journey framework, which describes all the individual stages a customer might experience, including awareness and understanding, purchase, usage, upgrade, recommendation and retaining or switching energy source. The paper reveals that the customer journey is non-linear and cyclical in nature, acknowledging that a household operates in a social network within which they could influence or be influenced by others. It also highlights the growing importance of SHS recommendations in raising awareness of SHSs, pointing to the shifts in the off-grid energy market environment where customer awareness no longer appears to be a main adoption barrier.

The multiple uncertainties in a microgrid, such as limited photovoltaic generations, ups and downs in the market price, and controlling different loads, are challenging points in managing campus energy with multiple microgrid systems and are a hot topic of research in the current era. Microgrids deployed at multiple campuses can be successfully operated with an exemplary energy management system (EMS) to address these challenges, offering several solutions to minimize the greenhouse gas (GHG) emissions, maintenance costs, and peak load demands of the microgrid infrastructure. This literature survey presents a comparative analysis of multiple campus microgrids’ energy management at different universities in different locations, and it also studies different approaches to managing their peak demand and achieving the maximum output power for campus microgrids. In this paper, the analysis is also focused on managing and addressing the uncertain nature of renewable energies, considering the storage technologies implemented on various campuses. A comparative analysis was also considered for the energy management of campus microgrids, which were investigated with multiple optimization techniques, simulation tools, and different types of energy storage technologies. Finally, the challenges for future research are highlighted, considering campus microgrids’ importance globally. Moreover, this paper is expected to open innovative paths in the future for new researchers working in the domain of campus microgrids.

Hydrothermal carbonization (HTC) continues to gain recognition over other valorization techniques for organic and biomass residue in recent research. The hydrochar product of HTC can be effectively produced from various sustainable resources and has been shown to have impressive potential for a wide range of applications. As industries work to adapt the implementation of HTC over large processes, the need for reliable models that can be referred to for predictions and optimization studies are becoming imperative. Although much of the available research relating to HTC has worked on the modeling area, a large gap remains in developing advanced computational models that can better describe the complex mechanisms, heat transfer, and fluid dynamics that take place in the reactor of the process. This review aims to highlight the importance of expanding the research relating to computational modeling for HTC conversion of biomass. It identifies six research areas that are recommended to be further examined for contributing to necessary advancements that need to be made for large-scale and continuous HTC operations. The six areas that are identified for further investigation are variable feedstock compositions, heat of exothermic reactions, type of reactor and scale-up, consideration of pre-pressurization, consideration of the heat-up period, and porosity of feedstock. Addressing these areas in future HTC modeling efforts will greatly help with commercialization of this promising technology.

Cellulose nanofibers (CNFs) and their applications have recently gained significant attention due to the attractive and unique combination of their properties including excellent mechanical properties, surface chemistry, biocompatibility, and most importantly, their abundance from sustainable and renewable resources. Although there are some commercial production plants, mostly in developed countries, the optimum CNF production is still restricted due to the expensive initial investment, high mechanical energy demand, and high relevant production cost. This paper discusses the development of the current trend and most applied methods to introduce energy-efficient approaches for the preparation of CNFs. The production of cost-effective CNFs represents a critical step for introducing bio-based materials to industrial markets and provides a platform for the development of novel high value applications. The key factor remains within the process and feedstock optimization of the production conditions to achieve high yields and quality with consistent production aimed at cost effective CNFs from different feedstock.

With the carbon reduction targets being set in the Paris Agreement on Climate Change, China is facing great pressure to meet its emission reduction commitment. The electric power industry as the major source of carbon emissions needs to be a focus. However, the uncertainty of power systems, the risk of reducing emissions and the fuzziness of carbon capture technology popularization rate and carbon reduction targets makes previous planning methods unsatisfactory for current planning. This paper establishes an interval fuzzy programming with a risk measure model which takes carbon capture technology and carbon reduction targets into account, to ensure that the complex electric management system achieves the best developmental state. It was concluded that in order to reduce carbon emissions, wind power and hydropower would be the best choices, and coal-fired power would be the suboptimal choice, and solar power would play a complementary role. Besides, decision makers should put much more effort into promoting and improving carbon capture technology instead of simply setting emission reduction targets. The non-synchronism of the downward trend in carbon emissions per unit of electricity generation and electric power industry total carbon emissions need to be taken seriously.

Petroleum coke (petcoke) is a by-product of heavy petroleum refining, with heating values comparable to that of coal. It is readily available in oil-producing countries such as the United States of America (USA) and the Kingdom of Saudi Arabia (KSA) at minimum costs and can be used as an inexpensive fossil fuel for power generation. Oxy-petcoke combustion is an attractive CO2 capture option as it avoids the use of additional absorption units and chemicals, and results in a CO2 + H2O flue gas stream that is compressed and dehydrated in a CO2 capture and purification unit (CO2CPU). The additional cost of the CO2CPU can be reduced through high pressure combustion. Hence, this paper reports a techno-economic analysis of an oxy-petcoke plant with CO2 capture simulated at pressures between 1 and 15 bars in Aspen PlusTM based on USA and KSA scenarios. Operating at high pressures leads to reduced equipment sizes and numbers of units, specifically compressors in CO2CPU, resulting in increased efficiencies and decreased costs. An optimum pressure of ~10 bars was found to maximize the plant efficiency (~29.7%) and minimize the levelized cost of electricity (LCOE), cost of CO2 avoided and cost of CO2 captured for both the USA and KSA scenarios. The LCOE was found to be moderately sensitive to changes in the capital cost (~0.7% per %) and increases in cost of petcoke (~0.5% per USD/tonne) and insensitive to the costs of labour, utilities and waste treatment.