• Energy Research
• other engineering and technologies close
• 11. Sustainability close
• 15. Life on land close
• CA close
• BE close
• UA close

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

The poultry industry is one of the largest and fastest growing sectors of livestock production in the world. The estimated 2010 world flock was over 18 billion birds with a yearly manure output of 22 million tonnes. Storage and disposal of raw poultry manure has become an environmental problem because of the associated air, water and soil pollution. Environmental and health problems such as odor and pathogens that may arise during and after land application of raw manure can be eliminated by drying. Dried manure can be utilized as a soil conditioner to improve soil tilth and reduce the problems associated with soil compaction and as a feed for ruminants because of its high nitrogen content. The aim of this study was to investigate the kinetics of thin layer drying of poultry manure and evaluate the effects of drying with heated air on the chemical and biological properties of manure. The effects of temperature and depth of manure layer were evaluated. The profile of the moisture content of poultry manure followed an exponential decay curve. The moisture decay constant was affected by the drying temperature and the depth of the manure layer. At the three temperature levels studied, the time required to dry poultry manure in 1 cm-deep layer was the least, followed by 2 and 3 cm-deep layers, respectively. The diffusion coefficient increased with both temperature and depth of drying layer, but did not show a linear increase with either variable. The optimum depth for drying manure (at which the highest drying effectiveness occurred) was 3 cm. Drying manure at 40-60°C resulted in the loss of 44-55% of the total Kjeldahl nitrogen, with losses increasing with both the temperature and depth of manure. The pH of the manure decreased from the initial value of 8.4 before drying to about 6.6 after drying. The odor analysis indicated that dried poultry manure did not have an offensive odor. Drying achieved 65.3 and 69.3% reductions in odor intensity and offensiveness, respectively. Reductions in the number of bacteria, mold/yeast and E.coli were 65-99, 74-99 and 99.97% respectively. The greatest reductions in microbial population occurred at the highest temperatures (60°C) and the thinest manure depths (1 cm). Heated air drying of poultry manure at temperatures between 40 and 60°C was effective in killing pathogens and removing odor.

Abstract Geological sequestration of CO 2 is an immediately available and technologically feasible means of reducing CO 2 emissions into the atmosphere, which is particularly suited to landlocked sedimentary basins. Geoscience, engineering, economic and public issues need addressing by governments and industry before proceeding with full scale implementation. Specific site selection should be based on a suitability analysis, a proper inventory of potential sites, an assessment of the fate of the injected CO 2 and a capacity determination, together with surface criteria such as CO 2 capture and transport. The suitability analysis, both at the basin and regional scales, is based on geological, geothermal, hydrodynamic, basin maturity, economic and societal criteria. The inventory of sequestration sites needs also identification of major CO 2 point sources and a cost benefit analysis. The potential for CO 2 escape and migration is a deciding factor in screening out unsafe sites. Site capacity should be determined based on in situ conditions and CO 2 properties and behavior. Transforming the geological space into the CO 2 space is an important step along the road map for selection of suitable CO 2 injection sites that allows the identification of safe large capacity sites. An example of application from the Alberta basin is presented.

Carbon capture, utilization, and storage (CCUS) is a gas injection technology that enables the storage of CO2 underground. The aims are twofold, on one hand to reduce the emissions of CO2 into the atmosphere and on the other hand to increase oil/gas/heat recovery. Different types of CCUS technologies and related engineering projects have a long history of research and operation in the USA. However, in China they have a short development period ca. 10 years. Unlike CO2 capture and CO2-EOR technologies that are already operating on a commercial scale in China, research into other CCUS technologies is still in its infancy or at the pilot-scale. This paper first reviews the status and development of the different types of CCUS technologies and related engineering projects worldwide. Then it focuses on their developments in China in the last decade. The main research projects, international cooperation, and pilot-scale engineering projects in China are summarized and compared. Finally, the paper examines the challenges and prospects to be experienced through the industrialization of CCUS engineering projects in China. It can be concluded that the CCUS technologies have still large potential in China. It can only be unlocked by overcoming the technical and social challenges.

Abstract In order to further reduce the impact of climate fluctuations on the typical meteorological year (TMY) database, this paper introduces an ensemble empirical model decomposition method to extract the periodic fluctuation and random fluctuation data from outdoor climate data separately, and to construct a comprehensive description parameter that eliminates the influence of random fluctuation data. An innovative TMY based on the comprehensive description parameter was developed in six selected cities of different climate zones in China. Compared with the existing Chinese TMY development method and outdoor design parameters, it is found that the typical meteorological months (TMMs) of each city and the outdoor design parameters from the improved TMY database have changed to a certain extent. Through the correlation analysis between improved TMY database and the cumulative long-average meteorological data, it reveals that the improved TMY can better describe the local average climatic characteristics. Finally, this paper discusses the impact of the improved TMY on the building heat loss index and outdoor thermal comfort in different building shapes. The results demonstrate that the energy demand and outdoor thermal comfort analysis based on the improved TMY are closer to long-term averaged outdoor climate, and the calculation deviations compared with conventional method are reduced by 1.18%–21.08% and 53.42%–76.82% respectively. This research will refine outdoor climate data for building design and analysis.

As efforts to address climate change shift to action at local scales, municipalities are called upon to develop locally specific action plans. Many municipalities lack the resources to develop energy and emissions-reducing policy interventions appropriate to their characteristics. This research synthesises urban form, scenario analysis and energy simulation into a cohesive workflow for evaluating energy and emissions policy interventions across a range of urban forms. A geospatial and census analysis of six cities across British Columbia, Canada, led to the development of seven urban neighborhood patterns. These represent neighborhood forms and densities found in cities of various sizes, densities, forms and climates. To test the approach of an urban built environment model (UBEM), retrofit and infill redevelopment ‘what-if’ scenarios were applied iteratively to two sample patterns comparing the relative efficacy of building technology-improvement policies versus land-use intensification policies. The future ‘what-if’ policy scenarios were spatially tested and validated using relevant policy. The simplified UBEM methods applied to typical patterns and development demonstrates a step towards an accessible and flexible modeling approach. Small and medium-sized municipalities can use this approach to assess and compare potential energy and emissions policy options and outcomes at building and neighborhood scales. 'Practice relevance' A new, simple method has been created for municipalities to understand multiple ‘what-if’ scenarios for reducing energy demand and emissions from buildings. This is based on profiles from census data, geospatial analysis and energy data that characterise urban neighborhood patterns. The approach integrates building-scale and neighborhood-scale energy and greenhouse gas simulations. It can simulate a variety of policy scenarios and strategy interventions in order to show the interactions between and among urban form and retrofit options. This enables planners and decision-makers to compare the relative magnitudes of different interventions at the neighborhood or city level for energy and emissions performance. The model was developed for use by a variety of communities in British Columbia, Canada. There is potential for adapting this method for use in other locations.

Abstract The global steel production has been growing for the last 50 years, from 200 Mt in 1950s to 1 240 Mt in 2006. Iron and steel making industry is one of the most energy-intensive industries, with an annual energy consumption of about 24 EJ, 5% of the world's total energy consumption. The steel industry accounts for 3%–4% of total world greenhouse gas emissions. Enhancing energy efficiency and employing energy saving/recovering technologies such as coke dry quechning (CDQ) and top pressure recovery turbine (TRT) can be short-term approaches to the steel industry to reduce greenhouse gas emission. The long-term approaches to achieving a significant reduction in CO2 emissions from the steel industry would be through developing and applying CO2 breakthrough technologies for iron and steel making, and through increasing use of renewable energy for iron and steel making. Thus, an overview of new CO2 breakthrough technologies for iron and steel making was made.

As presented in the first companion paper, distributed mixed-integer fuzzy hierarchical programming (DMIFHP) was developed for municipal solid waste management (MSWM) under complexities of heterogeneities, hierarchy, discreteness, and interactions. Beijing was selected as a representative case. This paper focuses on presenting the obtained schemes and the revealed mechanisms of the Beijing MSWM system. The optimal MSWM schemes for Beijing under various solid waste treatment policies and their differences are deliberated. The impacts of facility expansion, hierarchy, and spatial heterogeneities and potential extensions of DMIFHP are also discussed. A few of findings are revealed from the results and a series of comparisons and analyses. For instance, DMIFHP is capable of robustly reflecting these complexities in MSWM systems, especially for Beijing. The optimal MSWM schemes are of fragmented patterns due to the dominant role of the proximity principle in allocating solid waste treatment resources, and they are closely related to regulated ratios of landfilling, incineration, and composting. Communities without significant differences among distances to different types of treatment facilities are more sensitive to these ratios than others. The complexities of hierarchy and heterogeneities pose significant impacts on MSWM practices. Spatial dislocation of MSW generation rates and facility capacities caused by unreasonable planning in the past may result in insufficient utilization of treatment capacities under substantial influences of transportation costs. The problems of unreasonable MSWM planning, e.g., severe imbalance among different technologies and complete vacancy of ten facilities, should be gained deliberation of the public and the municipal or local governments in Beijing. These findings are helpful for gaining insights into MSWM systems under these complexities, mitigating key challenges in the planning of these systems, improving the related management practices, and eliminating potential socio-economic and eco-environmental issues resulting from unreasonable management.

Abstract Food waste (FW), primary sludge (PS) and waste activated sludge (WAS) were characterized and found to be complementary in the concentrations of carbohydrates, total Kjeldahl nitrogen (TKN), PO4–P and some metal for biological hydrogen production. Moreover, FW was found to have low pH buffering capacity while the values for PS and WAS were relatively higher. An anaerobic toxicity analysis (ATA) derived from a methanogenic ATA protocol showed that these waste materials had no toxicity to hydrogen production. Adding phosphate buffer to the FW significantly improved hydrogen production while initial pH was 7.0. Co-digestion of FW and sewage sludge was studied using a batch respirometric cultivation system. All combinations of the feedstocks (FW+PS, FW+WAS and FW+PS+WAS) showed enhanced hydrogen production potential as compared with the individual wastes. A mixing ratio of 1:1 was found to be the best among the ratios tested for all three co-digestion groups. A hydrogen yield of 112 mL/g volatile solid (VS) added was obtained from a combination of FW, PS and WAS. This yield was equivalent to 250 mL/g VS added if only FW contributed to hydrogen production. The reason for the enhancement of hydrogen production was postulated to be multifold in which the increase in buffer capacity in the co-digestion mixture was verified.