• Energy Research
• Closed Access close
• CN close
• GB close
• CA close

Abstract To obtain high yield and high concentration glucose from corncob residues (CRs), tetrahydrofuran (THF) + H2O co-solvent pretreatment was employed. The pretreatment parameters were firstly optimized by Box-Behnken Design of response surface method, and the maximum glucose yield (498.2 mg/g CRs) was obtained via enzymatic hydrolysis after pretreated under optimized conditions (53.7% THF concentration, 202.3 °C, 1.05 h). Then, the pretreated CRs under optimized conditions (optimized-CRs) were enzymatically hydrolyzed at high solid loading (15%–20%) and low enzyme input (5–8 FPU/g cellulose). The high concentration glucose production (128.6 mg/mL) was obtained from optimized-CRs after enzymatic hydrolysis at 20% solid loading with 10 FPU/g cellulose for 72 h, and then showed potential for reduction of enzyme input. Finally, the interactions between the 9 substrate-related factors and cellulose conversion were analyzed through correlation analysis, and found that Klason lignin remained in the cellulose-rich fractions and pseudo lignin condensed on the surface of the recovered substrate were the predominant inhibitors for enzymatic hydrolysis.

Abstract The prime purpose of this work is to prepare a novel kind of Pickering interfacial solid catalysts for biodiesel production to meet the requirements of highly efficiency and environmental benign. To achieve this goal, the core–shell P[xSPA-yDABCO]@SiO2@Fe3O4 composite materials with a shell of photo-responsive and base catalytic sites were manufactured by means of layer-by-layer fabrication method. The modified materials, entirely characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD) and magnetization versus magnetic (VSM) techniques, demonstrated sufficient catalytic active sites and photo-responsive sites. Among all the so-prepared catalysts, P[3SPA-2DABCO]@SiO2@Fe3O4 performs extremely well and can stabilize soybean oil-in-methanol Pickering emulsion for 24 h, achieving a biodiesel yield up to 98.2% at a catalyst dosage of 5 wt% after the reaction time of 5 h at 60 °C. Furthermore, the double responsive solid catalyst can be readily separated from the mixture of reaction by an external magnet and UV irradiation, and still presented superior catalytic activity after 6 cycles.

Among various bioreactors examined in anaerobic digestion and dark fermentation, UASB bioreactor has shown to be a promising alternative. However, mass transfer resistance and biomass washout have been the issues that reported as draw backs of the granular system in the literature. Another problem associated with such a system is its long start-up period as a result of biomass washout and long microbial granulation stage. In this paper, the results obtained from an UASFF bioreactor in methane (AD process) and hydrogen (DF process) production from POME, are presented to assess mass transfer of substrate into the granules and also study the role of internal packing used in the middle part of reactor in the process stability. The value of effectiveness factor, η, for AD and DF processes were calculated to be 0.96 and 0.94, respectively, indicating that there was no mass transfer resistance due to internal and/or external factors. The results showed that the packing material could retain biomass in the reactor and had outstanding contribution in the granulation enhancement. Its role as a supplementing treatment stage was more significant at low HRTs and up-flow velocities.

Both long-term and short-term alcohol consumption can cause internal homeostasis imbalance, and they have been proved to be related to the initiation and development of atrial fibrillation (AF). Ferroptosis is an iron-dependent form of non-apoptotic oxidative death which also regulate the cell death homeostasis, but whether it involves in AF induced by alcohol consumption remains unclear. Here, we report a study on the effect of ferroptosis on susceptibility to AF at different alcohol consumption frequencies. We divided the mice into single or frequent excessive alcohol consumption group which given sterile drinking water or alcohol by gavage at different frequencies. Meanwhile, the experimental group was given an intraperitoneal injection of ferroptosis inhibitor (Fer-1) before alcohol drinking. It was found that once exposure to 5 g/kg/d frequent excessive alcohol consumption, compared with the single excessive alcohol consumption group, the mice serum non-heme iron concentration, accumulation of iron and oxidative stress reaction in atrial tissues were increased, while the body weight, heart weight and heart weight to tibia length (HW/TL) ratio were decreased. In addition, the inducibility rate of AF increased, while RR interval, effective refractory periods (ERPs) and 90 % action potential duration (APD90) shortened, as well as QTc interval prolonged. Furthermore, the protein and mRNA expression levels of GPx4, FTL, FTH1, Kv1.5, Kv2.1, Kv4.3, Cav1.2, Serca2α, p-PLB were down-regulated, while PTGS2 was up-regulated. Most of the changes can be partially or completely reversed by Fer-1. These results suggest that frequent excessive alcohol consumption activates ferroptosis and increases the inducibility rate of AF. Nevertheless, inhibition of ferroptosis can balance iron overload disorders and reduce the generation of reactive oxygen species (ROS), eventually decrease the susceptibility to AF. Our results highlight the importance of guidance and warnings for unhealthy alcohol-abuse lifestyle.

Abstract This paper presented a novel method of dissipating solar photovoltaic heat based on the technology of micro-heat-pipe array and the utilization of photovoltaic-cell waste heat. This novel technology solved the problems of low PV electrical efficiency and thermal failure caused by high cell temperature, greatly increased the comprehensive utilization efficiency of solar energy, and extended the service life of photovoltaic modules. One-year experiments were conducted to investigate the electrical and thermal performance of a forced-circulation, household-type photovoltaic/thermal system based on micro-heat-pipe array in Beijing, China. Test results showed that on the four typical days in different seasons, the average electrical efficiencies were 13.76%, 11.92%, 13.71%, and 14.65%; the average thermal efficiencies were 31.62%, 33.07%, 24.99%, and 17.24%; and the average total efficiencies were 45.38%, 44.99%, 38.70%, 31.89%, respectively. The system met the demand of power supply on sunny days and the demand of hot water between March and November, except in cloudy days. These experimental results can provide basis and reference for practical applications of the system.