• Energy Research
• Closed Access close
• 2. Zero hunger close
• 12. Responsible consumption close
• 15. Life on land close
• CA close
• GB close

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

Abstract The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK–Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

Abstract In this paper, energy and exergy analyses of the geothermal-based hydrogen production via thermochemical water decomposition using a new, four-step copper–chlorine (Cu–Cl) cycle are conducted, and the respective cycle energy and exergy efficiencies are examined. Also, a parametric study is performed to investigate how each step of the cycle and its overall cycle performance are affected by reference environment temperatures, reaction temperatures, as well as energy efficiency of the geothermal power plant itself. As a result, overall energy and exergy efficiencies of the cycle are found to be 21.67% and 19.35%, respectively, for a reference case.

Abstract Eradicating poverty and mitigating greenhouse gas (GHG) emissions are core issues of global sustainable development goals (SDGs), and China is struggling in realizing these targets. The poverty reduction that leads to popualtion structure and lifestyle changes would have an impact on GHG emission changes. However, few studies have assessed the historical and future impacts of the poverty allevation on China's emissions. Here by linking Chinese Multi-Regional Input Output (MRIO) database to the global MRIO database EXIOBASE, and using provincial household consumption data, we identified the distribution of Chinese household greenhouse gas footprints (HGFs) by income groups in 2015 at the national and provinical levels. Moreover, we focused on the historical impact of poverty alleviation on HGFs during 2010–2015, and developed four scenarios to project future HGFs changes due to poverty alleviation by 2030. We find that eradicating extreme poverty in the secanrio S2, i.e., bringing people to an income above $1.9 daily, does not cause a large emission impact with current technological level. However, lifting people from a higher poverty line of $5.5 per day in the sceanrio S4 results in a 1.6% increase in emissions compared with the scenario S1 without any poverty reduction goals. Furthermore, realizing a higher poverty reduction target will result in an increase of emissions contribution from internatioanl supply chains due to the differences in consumption patterns among different income groups. Our study highlights the conflict between the high poverty alleviaition goal and emission reduciton in China, and reminds us of the need to make more technological efforts for avoiding the large emissions embodied in international supply chains.

Abstract Decentralised energy in the UK is rare. Cities in the north of England however lead the UK in terms of sustainable, low-carbon, local/district heating, through the implementation of combined-heat-and-power (CHP) facilities; substantial schemes are installed in several cities, including Barnsley and Sheffield. This paper presents the results from extensive experimental and theoretical feasibility studies, in which the merits of these were explored. Barnsley has a number of biomass-fuelled community energy generators, where pollutant monitoring and mathematical modelling were conducted to assess combustion characteristics and overall system performance. Measured pollutant levels were within the relative emission limits, though emission concentrations (CO, CO2, NO and particles) in the flue gas from the coal boiler were higher than the wood pellet boiler. Sheffield already has a citywide district energy network, centred around a sustainably-sourced waste-to-energy facility; an expansion of this scheme was investigated here. This focuses mainly on the link to a 30 MW wood-fired CHP plant, which could be a significant provider of additional thermal capacity (low-grade heat) to an expanded network. Through identifying heat sources and sinks – potential suppliers and end-users – key areas were identified where a connection to the heat network would be feasible.

Abstract The global steel production has been growing for the last 50 years, from 200 Mt in 1950s to 1 240 Mt in 2006. Iron and steel making industry is one of the most energy-intensive industries, with an annual energy consumption of about 24 EJ, 5% of the world's total energy consumption. The steel industry accounts for 3%–4% of total world greenhouse gas emissions. Enhancing energy efficiency and employing energy saving/recovering technologies such as coke dry quechning (CDQ) and top pressure recovery turbine (TRT) can be short-term approaches to the steel industry to reduce greenhouse gas emission. The long-term approaches to achieving a significant reduction in CO2 emissions from the steel industry would be through developing and applying CO2 breakthrough technologies for iron and steel making, and through increasing use of renewable energy for iron and steel making. Thus, an overview of new CO2 breakthrough technologies for iron and steel making was made.

Abstract Lignin is considered as a renewable and sustainable resource for producing value-added aromatic chemicals and functional carbon materials. Herein, we develop a one-step catalyst-free depolymerization strategy to convert lignin into aryl monomers and carbon nanospheres simultaneously. Importantly, microwave-assisted depolymerization (MAD) in conjunction with dichloromethane (CH2Cl2) vapors is developed. The total mass yield of guaiacols reached the highest amount of 225.1 mg/g at 600 °C, and the highest yields of phenols (49.0 mg/g) and aromatic hydrocarbons (155.1 mg/g) were obtained at 700 °C. Hydrogen radicals and hydrogen chloride (HCl) are in-situ formed from CH2Cl2, significantly decreasing the activation barrier and reforming pyrolysis vapors to promote the formation of aryl monomers. Interestingly, uniform carbon nanospheres with an average size of 140 nm were produced as co-products at 700 °C. The microwave “hot-spots”, allied with the continuous surface erosion and the decrease in surface energy of lignin-derived carbon precursors by CH2Cl2 vapor, can be considered the driving force for the ultimate formation of carbon nanospheres. The CH2Cl2/MAD system produces aryl monomers (26.8 wt% yield) and carbon nanospheres (36.6 wt% yield) at 700 °C. We provide a facile, intriguing and scalable approach to convert lignin to valuable aryl monomers and sustainable carbon materials that can be applied in the chemistry, energy and environmental fields.

As presented in the first companion paper, distributed mixed-integer fuzzy hierarchical programming (DMIFHP) was developed for municipal solid waste management (MSWM) under complexities of heterogeneities, hierarchy, discreteness, and interactions. Beijing was selected as a representative case. This paper focuses on presenting the obtained schemes and the revealed mechanisms of the Beijing MSWM system. The optimal MSWM schemes for Beijing under various solid waste treatment policies and their differences are deliberated. The impacts of facility expansion, hierarchy, and spatial heterogeneities and potential extensions of DMIFHP are also discussed. A few of findings are revealed from the results and a series of comparisons and analyses. For instance, DMIFHP is capable of robustly reflecting these complexities in MSWM systems, especially for Beijing. The optimal MSWM schemes are of fragmented patterns due to the dominant role of the proximity principle in allocating solid waste treatment resources, and they are closely related to regulated ratios of landfilling, incineration, and composting. Communities without significant differences among distances to different types of treatment facilities are more sensitive to these ratios than others. The complexities of hierarchy and heterogeneities pose significant impacts on MSWM practices. Spatial dislocation of MSW generation rates and facility capacities caused by unreasonable planning in the past may result in insufficient utilization of treatment capacities under substantial influences of transportation costs. The problems of unreasonable MSWM planning, e.g., severe imbalance among different technologies and complete vacancy of ten facilities, should be gained deliberation of the public and the municipal or local governments in Beijing. These findings are helpful for gaining insights into MSWM systems under these complexities, mitigating key challenges in the planning of these systems, improving the related management practices, and eliminating potential socio-economic and eco-environmental issues resulting from unreasonable management.

Phosphogypsum (PG) is the solid waste product of phosphate fertilizer production and is characterized by high concentrations of salts, heavy metals, and certain natural radionuclides. The work reported in this paper examined the influence of PG amendment on soil physicochemical proprieties, along with its potential impact on several physiological traits of sunflower seedlings grown under controlled conditions. Sunflower seedlings were grown on agricultural soil substrates amended with PG at rates of 0, 2.5, and 5 %. The pH of the soil decreased but electrical conductivity and organic matter, calcium, phosphorus, sodium, and heavy metal contents increased in proportion to PG concentration. In contrast, no variations were observed in magnesium content and small increases were recorded in potassium content. The effects of PG on sunflower growth, leaf chlorophyll content, nutritional status, osmotic regulator content, heavy metal accumulation, and antioxidative enzymes were investigated. Concentrations of trace elements in sunflower seedlings grown in PG-amended soil were considerably lower than ranges considered phytotoxic for vascular plants. The 5 % PG dose inhibited shoot extension and accumulation of biomass and caused a decline in total protein content. However, chlorophyll, lipid peroxidation, proline and sugar contents, and activities of antioxidant enzymes such as superoxide dismutase and catalase increased. Collectively, these results strongly support the hypothesis that enzymatic antioxidation capacity is an important mechanism in tolerance of PG salinity in sunflower seedlings.

Abstract Food waste (FW), primary sludge (PS) and waste activated sludge (WAS) were characterized and found to be complementary in the concentrations of carbohydrates, total Kjeldahl nitrogen (TKN), PO4–P and some metal for biological hydrogen production. Moreover, FW was found to have low pH buffering capacity while the values for PS and WAS were relatively higher. An anaerobic toxicity analysis (ATA) derived from a methanogenic ATA protocol showed that these waste materials had no toxicity to hydrogen production. Adding phosphate buffer to the FW significantly improved hydrogen production while initial pH was 7.0. Co-digestion of FW and sewage sludge was studied using a batch respirometric cultivation system. All combinations of the feedstocks (FW+PS, FW+WAS and FW+PS+WAS) showed enhanced hydrogen production potential as compared with the individual wastes. A mixing ratio of 1:1 was found to be the best among the ratios tested for all three co-digestion groups. A hydrogen yield of 112 mL/g volatile solid (VS) added was obtained from a combination of FW, PS and WAS. This yield was equivalent to 250 mL/g VS added if only FW contributed to hydrogen production. The reason for the enhancement of hydrogen production was postulated to be multifold in which the increase in buffer capacity in the co-digestion mixture was verified.