• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• 6. Clean water close
• 15. Life on land close
• 9. Industry and infrastructure close
• US close
• CA close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Plants exhibit plasticity in response to their current environment and, in some cases, to that of the previous generation (i.e. maternal effects). However, few studies have evaluated both within- and between-generation plasticities and the extent to which they interact to influence fitness, especially in natural environments. The plasticity of adult traits to two generations of natural differences in light was determined for Campanulastrum americanum, a forest-edge herb that expresses annual and biennial life histories. Plasticity was found to an individual's light environment (within generation) and the maternal light environment (between generations). Responses to ambient light for size traits and timing of flowering were probably passive, whereas apparently adaptive responses were found for light acquisition traits. Maternal light influenced the expression of most adult traits but had the strongest effect when plants were germinated in natural environments. The transgenerational effects of light were consistent with adaptive plasticity for several traits. Plastic within-generation changes in flowering time may also result in adaptive between-generation effects by altering the offspring life history schedule. Finally, the results underscore the importance of conducting studies of within- and between-generation plasticity in natural populations, where the environmental context is relevant to that in which the traits evolved.

Abstract A new formulation for the evaporation, flashing, condensation processes taking place in the effects of thermal desalination systems which simulates the operation of both forward and parallel/cross configurations is coupled with an exergo-economic model based on the SPECO method. The thermo-economic model uses accurate properties for the seawater, brine, pure water and vapour and is solved with an equation solver which does not require the development of a specific solution algorithm as in most previous studies. This flexible model is used to analyze the influence of the number of effects N and the temperature difference ΔT e between effects on the technical and economic performance of multi-effect desalination systems with ejector vapour compression. In particular, it is shown that the performance calculated by an earlier black-box approach is not attainable by technically and economically realistic systems. It is also shown that for each feed configuration and a given number of effects there exists an optimum value of ΔT e which minimizes the cost of the produced potable water. This last result forms the basis of a procedure that combines black-box results with the optimum value of ΔT e and can be used to select the appropriate system for any specific application.

• Premise of the study: Climate change is associated with phenological shifts in an increasing number of organisms worldwide. However, accurate estimates of these shifts are dependent on long‐term data sets that include phenological observations from before annual average temperatures began to rise.• Methods: We compared the first flowering times of native prairie plants between 2007 and 2010 with historical data recorded by O. A. Stevens from 1910 to 1961. By merging climate variable data from the same time period, it also was possible to correlate first flowering dates with associated climate variables.• Key results: Over the past 100 years, spring temperatures in the Red River Valley near Fargo, North Dakota, USA, have increased, and growing seasons have lengthened significantly. Seventy‐five percent of the 178 species observed by Stevens had flowering times that were sensitive to at least one variable related to temperature or precipitation. Over the past 4 yr, 5% to 17% of the species observed have significantly shifted their first flowering time either earlier or later relative to the previous century.• Conclusions: The results of this study indicate that as spring temperatures in the northern Great Plains have increased and the growing season has lengthened, some spring flowering species have advanced their first flowering time, some fall species have delayed their first flowering, and some species have not changed. Given the importance of flowering timing for reproductive success, the changing climate in the Great Plains is expected to have long‐term ecological and evolutionary consequences for native plant species.

AbstractA bioreactor system composed of a stirred tank and three tubular bioreactors in series was established, and continuous ethanol fermentation was carried out using a general Saccharomyces cerevisiae strain and a very high gravity medium containing 280 g L−1 glucose, supplemented with 5 g L−1 yeast extract and 3 g L−1 peptone. Sustainable oscillations of glucose, ethanol, and biomass were observed when the tank was operated at the dilution rate of 0.027 h−1, which significantly affected ethanol fermentation performance of the system. After the tubular bioreactors were packed with 1/2″ Intalox ceramic saddles, the oscillations were attenuated and quasi‐steady states were achieved. Residence time distributions were studied for the packed bioreactors by the step input response technique using xylose as a tracer, which was added into the medium at a concentration of 20 g L−1, indicating that the backmixing alleviation assumed for the packed tubular bioreactors could not be established, and its contribution to the oscillation attenuation could not be verified. Furthermore, the role of the packing's yeast cell immobilization in the oscillation attenuation was investigated by packing the tubular bioreactors with packings with significant difference in yeast cell immobilization effects, and the experimental results revealed that only the Intalox ceramic saddles and wood chips with moderate yeast cell immobilization effects could attenuate the oscillations, and correspondingly, improved the ethanol fermentation performance of the system, while the porous polyurethane particles with good yeast cell immobilization effect could not. And the viability analysis for the immobilized yeast cells illustrated that the extremely lower yeast cell viability within the tubular bioreactors packed with the porous polyurethane particles could be the reason for their inefficiency, while the yeast cells loosely immobilized onto the surfaces of the Intalox ceramic saddles and wood chips could be renewed during the fermentation, guaranteeing their viability and making them more efficient in attenuating the oscillations. The packing Raschig rings without yeast cell immobilization effect did not affect the oscillatory behavior of the tubular bioreactors, further supporting the role of the yeast cell immobilization in the oscillation attenuation. Biotechnol. Bioeng. 2009;102: 113–121. © 2008 Wiley Periodicals, Inc.

Abstract Industrial hemp, (Cannabis sativa L.), one of the earliest crops spun for fiber, is now used for a variety of commercial products including paper, textiles, clothing, biodegradable plastics, biofuel, food, animal feed etc., all of which are derived from hemp fiber or seeds. Being wind pollinated, dioecious and staminate hemp plants produce large amounts of pollen that are attractive to bees. Hemp flowering in northern Colorado, where this study was conducted, occurs between the end of July and the end of September. This time period coincides with a dearth of pollinator-friendly crop plants in the region, making hemp flowers a potentially valuable source of pollen for foraging bees. Here we present the diversity and abundance of bees collected in the fields of flowering hemp. A total of 23 different genera of bees were collected of which the European honeybee, Apis mellifera at 38% of the total abundance was the most dominant followed by Melissodes bimaculata at 25% and Peponapis pruinosa at 16%. These three genera made up nearly 80% of the total abundance. While hemp does not produce any nectar, the pollen rich nature of the flowers can make hemp an ecologically valuable crop. As cultivation of hemp continues to expand, we expect insect pests on hemp to also become prevalent. Our results documenting bee diversity in flowering hemp provides the impetus for the development of integrated pest management plans that protect pollinators while controlling pests.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

As climate change moves insect systems into uncharted territory, more knowledge about insect dynamics and the factors that drive them could enable us to better manage and conserve insect communities. Climate change may also require us to revisit insect management goals and strategies and lead to a new kind of scientific engagement in management decision-making. Here we make five key points about the role of insect science in aiding and crafting management decisions, and we illustrate those points with the monarch butterfly and the Karner blue butterfly, two species undergoing considerable change and facing new management dilemmas. Insect biology has a strong history of engagement in applied problems, and as the impacts of climate change increase, a reimagined ethic of entomology in service of broader society may emerge. We hope to motivate insect biologists to contribute time and effort toward solving the challenges of climate change.

Abstract Synthetic hyperaccumulator biomass (SHB) impregnated with Ni, Zn, Cu, Co or Cr was used to conduct 11 experiments in a lab-scale fluidized bed reactor. Two runs with blank corn stover, with no metal added, were also conducted. The reactor was operated in an entrained mode in a oxygen-free (N2) environment at 873 K and 1 atm . The apparent gas residence time through the lab-scale reactor was 0.6 s at 873 K . The material balance for the lab-scale experiments on N2-free basis varied between 81% and 98%. The presence of a heavy metal in the SHB decreased the char yield and increased the tar yield, compared to the blank. The char and gas yields appeared to depend on the form of the metal salt used to prepare the SHB. However, the metal distribution in the product streams did not seem to be influenced by the chemical form of the metal salt used to prepare the SHB. Greater than 98.5% of the metal in the product stream was concentrated in the char formed by pyrolyzing and gasifying the SHB in the reactor. The metal concentration in the char varied between 0.7 and 15.3% depending on the type of metal in the SHB. However, the metal concentration was increased 4 to 6 times in the char compared to the feed.