• Energy Research
• 13. Climate action close
• 15. Life on land close
• 6. Clean water close
• CA close

Abstract The global steel production has been growing for the last 50 years, from 200 Mt in 1950s to 1 240 Mt in 2006. Iron and steel making industry is one of the most energy-intensive industries, with an annual energy consumption of about 24 EJ, 5% of the world's total energy consumption. The steel industry accounts for 3%–4% of total world greenhouse gas emissions. Enhancing energy efficiency and employing energy saving/recovering technologies such as coke dry quechning (CDQ) and top pressure recovery turbine (TRT) can be short-term approaches to the steel industry to reduce greenhouse gas emission. The long-term approaches to achieving a significant reduction in CO2 emissions from the steel industry would be through developing and applying CO2 breakthrough technologies for iron and steel making, and through increasing use of renewable energy for iron and steel making. Thus, an overview of new CO2 breakthrough technologies for iron and steel making was made.

The installation of wind energy increased in the last twenty years, as its cost decreased, and it contributes to reducing GHG emissions. A race toward gigantism characterizes wind turbine development, primarily driven by offshore projects. The larger wind turbines are facing higher loads, and the imperatives of mass reduction make them more flexible. Size increase of wind turbines results in higher structural vibrations that reduce the lifetime of the components (blades, main shaft, bearings, generator, gearbox, etc.) and might lead to failure or destruction. This paper aims to present in detail the problems associated with wind turbine vibration and a thorough literature review of the different mitigation solutions. We explore the advantages, drawbacks, and challenges of the existing vibration control systems for wind turbines. These systems belong to six main categories, according to the physical principles used and how they operate to mitigate the vibrations. This paper offers a multi-criteria analysis of a vast number of systems in different phases of development, going from full-scale testing to prototype stage, experiments, research, and ideas.

Abstract Lignin is considered as a renewable and sustainable resource for producing value-added aromatic chemicals and functional carbon materials. Herein, we develop a one-step catalyst-free depolymerization strategy to convert lignin into aryl monomers and carbon nanospheres simultaneously. Importantly, microwave-assisted depolymerization (MAD) in conjunction with dichloromethane (CH2Cl2) vapors is developed. The total mass yield of guaiacols reached the highest amount of 225.1 mg/g at 600 °C, and the highest yields of phenols (49.0 mg/g) and aromatic hydrocarbons (155.1 mg/g) were obtained at 700 °C. Hydrogen radicals and hydrogen chloride (HCl) are in-situ formed from CH2Cl2, significantly decreasing the activation barrier and reforming pyrolysis vapors to promote the formation of aryl monomers. Interestingly, uniform carbon nanospheres with an average size of 140 nm were produced as co-products at 700 °C. The microwave “hot-spots”, allied with the continuous surface erosion and the decrease in surface energy of lignin-derived carbon precursors by CH2Cl2 vapor, can be considered the driving force for the ultimate formation of carbon nanospheres. The CH2Cl2/MAD system produces aryl monomers (26.8 wt% yield) and carbon nanospheres (36.6 wt% yield) at 700 °C. We provide a facile, intriguing and scalable approach to convert lignin to valuable aryl monomers and sustainable carbon materials that can be applied in the chemistry, energy and environmental fields.

As presented in the first companion paper, distributed mixed-integer fuzzy hierarchical programming (DMIFHP) was developed for municipal solid waste management (MSWM) under complexities of heterogeneities, hierarchy, discreteness, and interactions. Beijing was selected as a representative case. This paper focuses on presenting the obtained schemes and the revealed mechanisms of the Beijing MSWM system. The optimal MSWM schemes for Beijing under various solid waste treatment policies and their differences are deliberated. The impacts of facility expansion, hierarchy, and spatial heterogeneities and potential extensions of DMIFHP are also discussed. A few of findings are revealed from the results and a series of comparisons and analyses. For instance, DMIFHP is capable of robustly reflecting these complexities in MSWM systems, especially for Beijing. The optimal MSWM schemes are of fragmented patterns due to the dominant role of the proximity principle in allocating solid waste treatment resources, and they are closely related to regulated ratios of landfilling, incineration, and composting. Communities without significant differences among distances to different types of treatment facilities are more sensitive to these ratios than others. The complexities of hierarchy and heterogeneities pose significant impacts on MSWM practices. Spatial dislocation of MSW generation rates and facility capacities caused by unreasonable planning in the past may result in insufficient utilization of treatment capacities under substantial influences of transportation costs. The problems of unreasonable MSWM planning, e.g., severe imbalance among different technologies and complete vacancy of ten facilities, should be gained deliberation of the public and the municipal or local governments in Beijing. These findings are helpful for gaining insights into MSWM systems under these complexities, mitigating key challenges in the planning of these systems, improving the related management practices, and eliminating potential socio-economic and eco-environmental issues resulting from unreasonable management.

Abstract Food waste (FW), primary sludge (PS) and waste activated sludge (WAS) were characterized and found to be complementary in the concentrations of carbohydrates, total Kjeldahl nitrogen (TKN), PO4–P and some metal for biological hydrogen production. Moreover, FW was found to have low pH buffering capacity while the values for PS and WAS were relatively higher. An anaerobic toxicity analysis (ATA) derived from a methanogenic ATA protocol showed that these waste materials had no toxicity to hydrogen production. Adding phosphate buffer to the FW significantly improved hydrogen production while initial pH was 7.0. Co-digestion of FW and sewage sludge was studied using a batch respirometric cultivation system. All combinations of the feedstocks (FW+PS, FW+WAS and FW+PS+WAS) showed enhanced hydrogen production potential as compared with the individual wastes. A mixing ratio of 1:1 was found to be the best among the ratios tested for all three co-digestion groups. A hydrogen yield of 112 mL/g volatile solid (VS) added was obtained from a combination of FW, PS and WAS. This yield was equivalent to 250 mL/g VS added if only FW contributed to hydrogen production. The reason for the enhancement of hydrogen production was postulated to be multifold in which the increase in buffer capacity in the co-digestion mixture was verified.

The objective of this work was to study the kinetics of lipid production at lab scale fermenters by a new isolate of Yarrowia lipolytica SKY7. The model terms glycerol concentration inoculum and C/N ratio with inoculum were found to be significant for lipid production. Lipid production was found to be higher in glycerol 82.5g/L, C/N ratio 75 and inoculum volume 6.25%. Optimized culture conditions were tested at 15L bench scale reactor. The biomass concentration and lipid content obtained was 29.5g/L and 50% (w/w), respectively. The yield coefficients were calculated and found to be 0.332g/g (g biomass/g of glycerol) of biomass and 0.179g/g (g lipid/g glycerol consumed) for lipid. Observed rates of lipid production show lipid production from 30h of fermentation. Out of the total glycerol consumed, 41.1% glycerol was converted into biomass, lipid, and citric acid.

Abstract A dynamic model of vapour compression refrigeration system is developed. The overall model consists of the following basic components: a compressor, a condenser, an expansion valve, an evaporator, an evaporative cooler and a cool storage. The integrated system is referred to as chilled water cooling system with storage (CWCS). The mathematical modelling of the CWC system undertaken in this study predicts the change in state of refrigerant in the system with respect to time. A computer program is developed to solve the dynamic equations along with empirical correlations describing refrigerant properties. Open-loop tests are carried out to study the performance characteristics of the system under varied cooling load and compressor speed. The model is intended to serve as an analytical design tool and to provide a basis for control analysis. Based on a heuristic method, ‘sub-optimal on–off control’ strategies for the chilled water cool storage system are developed using a reduced order model. The methodology of generating such control profiles is illustrated and the tests for optimality show that the control profiles are near optimal. The on–off control scheme is simulated on the full order CWC system. The operating performance of the system is described under several simulated cases. The results show that the control scheme is capable of maintaining the chilled water temperature in the chosen range.

Abstract. The assessment of wind conditions in complex terrain requires the use of Computational Fluid Dynamics (CFD) simulations incorporating an accurate parameterization of forest canopy effects and variable thermal stability effects. This study aims to investigate how incorporating the presence of trees can improve flow predictions. A three-dimensional steady Reynolds-averaged Navier-Stokes (RANS) equations model is set up using OpenFOAM to simulate the flow over a complex terrain site comprising two parallel ridges located near Perdigão, Portugal. A 7.5 km × 7.5 km terrain of the Perdigao site is constructed from elevation data centered around a 100 m met-mast located on the northeast ridge. A 30-min averaged stationary period corresponding to near-neutral conditions on a single met-mast tower is simulated. The impact of incorporating different source terms is studied such as forest canopy, Coriolis forces as well as also buoyancy forces. The prediction capability of the models is analyzed for different groups of towers on the South-West ridge, inside the valley, and on the North-East ridge based on the flow topology. The inclusion of a canopy model is shown to improve predictions close to the ground for most of the towers, while reducing prediction accuracy on top of the ridges, illustrating the need to represent terrain heterogeneity.

Abstract Greenhouse gas emissions from the burning of fossil fuels are one of the main causes of anthropogenic climate change. Large-scale deployment of renewable energy can play an immense role in transforming the global energy system and mitigating the emissions. This paper describes the development of a novel framework called MArket Penetration ModeLing of Renewable Energy Technologies in Electric Power Sector (MAPLET-PS). MAPLET-PS assesses the impacts of policy measures such as carbon price and financial incentives on the adoption of renewable energy technologies. The framework was used to develop a case study for the electric power sector of Alberta, a fossil-dominated province in Western Canada. The results show that implementing a carbon price on fossil fuel electric power sources and incentives for renewable energy, along with the phase-out of coal-fired electricity generation, can mitigate 29% of Alberta's electricity sector 2020 GHG emissions by 2050 and reduce GHG emissions from 46.5 Mt of CO2 eq. in 2020 to 23.6 and 29.1 Mt of CO2 eq. per year in 2030 and 2050, respectively, in Alberta. Moreover, these changes can increase the share of renewable energies from 12.5% in 2018 to 30% in 2050. These rates can be achieved by implementing a carbon price along with a 1000 $ incentive per kW new capacity development and 70 $ incentive per MWh electric power generation from renewable sources, from 2021 to 2025, primarily from wind turbines.