• Energy Research
• Closed Access close
• Open Source close
• Embargo close
• 13. Climate action close
• 2. Zero hunger close
• CA close

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

Abstract In this paper, an exergoeconomic analysis and optimization of a combined solar and wind energy based system is proposed. The trigeneration system produces ammonia, hydrogen and electricity through integrated solar photovoltaic panels and wind turbines. Also, an ammonia fuel cell unit is utilized for generating power during insufficient available energy. The overall exergetic efficiency is found to be 29.7% and the corresponding energetic efficiency is 28.5% under design conditions. In addition, the total cost rate is obtained as 63,345 $/h. Moreover, multi-objective optimization is performed with various decision variables at different combinations of solar intensities and wind speeds, considering the maximization of exergy efficiency and minimization of total cost rates. The developed system provides better optimal operation points under high wind speeds. The optimal exergy efficiency is found to vary between 10.9% and 38.2% depending on the available solar and wind energy. The corresponding optimal total cost rates vary between 11,959 $/h and 59,755 $/h, respectively. Several parametric studies are also performed to determine the effects of changing system conditions on the thermodynamic and economic performance of the developed system.

Abstract In this paper, energy and exergy analyses of the geothermal-based hydrogen production via thermochemical water decomposition using a new, four-step copper–chlorine (Cu–Cl) cycle are conducted, and the respective cycle energy and exergy efficiencies are examined. Also, a parametric study is performed to investigate how each step of the cycle and its overall cycle performance are affected by reference environment temperatures, reaction temperatures, as well as energy efficiency of the geothermal power plant itself. As a result, overall energy and exergy efficiencies of the cycle are found to be 21.67% and 19.35%, respectively, for a reference case.

Abstract Hydrogen fuel cells are received increasingly wide attention in order to develop green ships and reduce greenhouse gas emissions in the field of waterway transportation. Metal hydrides (MHs) can be used to store hydrogen for green ships due to their high volumetric storage capacity and safety. Various measures should be considered in the design and manufacture process of the MH reactor to strengthen its performance of heat and mass transfer and obtain an acceptable hydrogen storage capacity. In this work, LaNi5 hydride is used as the hydrogen storage material and packed in the reactor. A basic axisymmetric numerical model for the hydrogen storage system without a heat exchanger has been developed and proved to be effective through the comparison between its simulation results and the published data during dehydriding. A hybrid heat exchanger, which is consisted of a phase change material (PCM) jacket and a coiled-tube, has been applied into the hydrogen storage system to relieve the thermal effect of MH in the dehydriding process on system performance. Effects of the heat transfer coefficient between the circulating heating water in the coil-tube and the MH bed, the temperature of circulating heating water and the pressure at the outlet on the dehydriding performance have been investigated. Based on parametric study, the relationships among the average dehydriding rate, the heat transfer coefficient, the heating water temperature and the outlet pressure have been found and fitted as simple equations. These fitted equations can be considered as a reference, which provides an important method to effectively control the dehydriding rate in order to satisfy the fuel requirement of the power unit and ensure the safe navigation of green ships in the future.

Abstract Geological sequestration of CO 2 is an immediately available and technologically feasible means of reducing CO 2 emissions into the atmosphere, which is particularly suited to landlocked sedimentary basins. Geoscience, engineering, economic and public issues need addressing by governments and industry before proceeding with full scale implementation. Specific site selection should be based on a suitability analysis, a proper inventory of potential sites, an assessment of the fate of the injected CO 2 and a capacity determination, together with surface criteria such as CO 2 capture and transport. The suitability analysis, both at the basin and regional scales, is based on geological, geothermal, hydrodynamic, basin maturity, economic and societal criteria. The inventory of sequestration sites needs also identification of major CO 2 point sources and a cost benefit analysis. The potential for CO 2 escape and migration is a deciding factor in screening out unsafe sites. Site capacity should be determined based on in situ conditions and CO 2 properties and behavior. Transforming the geological space into the CO 2 space is an important step along the road map for selection of suitable CO 2 injection sites that allows the identification of safe large capacity sites. An example of application from the Alberta basin is presented.

Abstract Eradicating poverty and mitigating greenhouse gas (GHG) emissions are core issues of global sustainable development goals (SDGs), and China is struggling in realizing these targets. The poverty reduction that leads to popualtion structure and lifestyle changes would have an impact on GHG emission changes. However, few studies have assessed the historical and future impacts of the poverty allevation on China's emissions. Here by linking Chinese Multi-Regional Input Output (MRIO) database to the global MRIO database EXIOBASE, and using provincial household consumption data, we identified the distribution of Chinese household greenhouse gas footprints (HGFs) by income groups in 2015 at the national and provinical levels. Moreover, we focused on the historical impact of poverty alleviation on HGFs during 2010–2015, and developed four scenarios to project future HGFs changes due to poverty alleviation by 2030. We find that eradicating extreme poverty in the secanrio S2, i.e., bringing people to an income above $1.9 daily, does not cause a large emission impact with current technological level. However, lifting people from a higher poverty line of $5.5 per day in the sceanrio S4 results in a 1.6% increase in emissions compared with the scenario S1 without any poverty reduction goals. Furthermore, realizing a higher poverty reduction target will result in an increase of emissions contribution from internatioanl supply chains due to the differences in consumption patterns among different income groups. Our study highlights the conflict between the high poverty alleviaition goal and emission reduciton in China, and reminds us of the need to make more technological efforts for avoiding the large emissions embodied in international supply chains.

Abstract In order to further reduce the impact of climate fluctuations on the typical meteorological year (TMY) database, this paper introduces an ensemble empirical model decomposition method to extract the periodic fluctuation and random fluctuation data from outdoor climate data separately, and to construct a comprehensive description parameter that eliminates the influence of random fluctuation data. An innovative TMY based on the comprehensive description parameter was developed in six selected cities of different climate zones in China. Compared with the existing Chinese TMY development method and outdoor design parameters, it is found that the typical meteorological months (TMMs) of each city and the outdoor design parameters from the improved TMY database have changed to a certain extent. Through the correlation analysis between improved TMY database and the cumulative long-average meteorological data, it reveals that the improved TMY can better describe the local average climatic characteristics. Finally, this paper discusses the impact of the improved TMY on the building heat loss index and outdoor thermal comfort in different building shapes. The results demonstrate that the energy demand and outdoor thermal comfort analysis based on the improved TMY are closer to long-term averaged outdoor climate, and the calculation deviations compared with conventional method are reduced by 1.18%–21.08% and 53.42%–76.82% respectively. This research will refine outdoor climate data for building design and analysis.

Abstract The global steel production has been growing for the last 50 years, from 200 Mt in 1950s to 1 240 Mt in 2006. Iron and steel making industry is one of the most energy-intensive industries, with an annual energy consumption of about 24 EJ, 5% of the world's total energy consumption. The steel industry accounts for 3%–4% of total world greenhouse gas emissions. Enhancing energy efficiency and employing energy saving/recovering technologies such as coke dry quechning (CDQ) and top pressure recovery turbine (TRT) can be short-term approaches to the steel industry to reduce greenhouse gas emission. The long-term approaches to achieving a significant reduction in CO2 emissions from the steel industry would be through developing and applying CO2 breakthrough technologies for iron and steel making, and through increasing use of renewable energy for iron and steel making. Thus, an overview of new CO2 breakthrough technologies for iron and steel making was made.