• Energy Research
• 2016-2025close
• 12. Responsible consumption close
• EU close
• FI close
• CD close

This study focuses on formulating the most sustainable concrete by incorporating recycled concrete aggregates and other products retrieved from construction and demolition (C&D) activities. Both recycled coarse aggregates (RCA) and recycled fine aggregates (RFA) are firstly used to fully replace the natural coarse and fine aggregates in the concrete mix design. Later, the cement rich ultrafine particles, recycled glass powder and mineral fibres recovered from construction and demolition wastes (CDW) are further incorporated at a smaller rate either as cement substituent or as supplementary additives. Remarkable properties are noticed when the RCA (4–12 mm) and RFA (0.25–4 mm) are fully used to replace the natural aggregates in a new concrete mix. The addition of recycled cement rich ultrafines (RCU), Recycled glass ultrafines (RGU) and recycled mineral fibres (RMF) into recycled concrete improves the modulus of elasticity. The final concrete, which comprises more than 75% (wt.) of recycled components/materials, is believed to be the most sustainable and green concrete mix. Mechanical properties and durability of this concrete have been studied and found to be within acceptable limits, indicating the potential of recycled aggregates and other CDW components in shaping sustainable and circular construction practices. The authors wish to acknowledge the financial support from EU Horizon 2020 Project VEEP ‘‘Cost-Effective Recycling of C&DW in High Added Value Energy Efficient Prefabricated Concrete Compo-nents for Massive Retrofitting of our Built Environment” (No.723582).

The social confinement resulting from the COVID-19 crisis temporarily reduced greenhouse gas emissions. Although experts contend that the decrease in pollution rates was not drastic, some surveys detect growth in social concern about the climate. In this new climate-conscious environment, municipalities and local governments are promoting a new way of living and caring for cities, even before they can regain national and international freedom of movement. This work analyzes the connections between new climate awareness arising from the COVID-19 crisis, proposals of sustainable citizenship around the world, and its communication on Twitter to educate the new eco-conscious audience. The methodology mixes quantitative and qualitative analysis, using the Twitonomy Premium tool and the Twitter research tool with data extracted at the end of December 2020. Among the top ten most influential and active accounts, the results show educational institutions, local institutions, companies, neighborhoods, associations, and influencers. The impossibility of living in the city has not prevented citizen education and commitment to make real change for when that city and its citizens return to normality. However, this new normality must be different: more ecological, more responsible, more sustainable, and practiced from early childhood.

To reduce greenhouse gas (GHG) emissions, the European Union (EU) has targets for utilizing energy from renewable sources. By 2030, a minimum of 3.5% of energy in the EU���s transport sector should come from renewable biological sources, such as crop residues. This paper analyzed EU���s ���advanced bioethanol��� potential from wheat straw and maize stover and evaluated its environmental (land, water, and carbon) footprint. We differentiated between gross and net bioethanol output, the latter by subtracting the energy inputs in production. Results suggest that the annual amount of the sustainably harvestable wheat straw and maize stover is 81.9 Megatonnes (Mt) at field moisture weight (65.3 Mt as dry weight), yielding 470 PJ as gross (404 PJ as net) advanced bioethanol output. Calculated net advanced bioethanol can replace 2.95% of EU transport sector���s energy consumption. EU���s advanced bioethanol has a land footprint of 0.28 m2 MJ���1 for wheat straw and 0.18 m2 MJ���1 for maize stover. The average water footprint of advanced bioethanol is 173 L MJ���1 for wheat straw and 113 L MJ���1 for maize stover. The average carbon footprint per unit of advanced bioethanol is 19.4 and 19.6 g CO2eq MJ���1 for wheat straw and maize stover, respectively. Using advanced bioethanol can lead to emission savings, but EU���s advanced bioethanol production potential is insufficient to achieve EU���s target of a minimum share of 3.5% of advanced biofuels in the transport sector by 2030, and the associated water and land footprints are not smaller than footprints of conventional bioethanol.

The expansion of irrigated agriculture has increased global crop production but resulted in widespread stress to freshwater resources. Ensuring that increases in irrigated production only occur in places where water is relatively abundant is a key objective of sustainable agriculture, and knowledge of how irrigated land has evolved is important for measuring progress towards water sustainability. Yet a spatially detailed understanding of the evolution of global area equipped for irrigation (AEI) is missing. Here we utilize the latest sub-national irrigation statistics (covering 17298 administrative units) from various official sources to develop a gridded (5 arc-min resolution) global product of AEI for the years 2000, 2005, 2010, and 2015. We find that AEI increased by 11% from 2000 (297 Mha) to 2015 (330 Mha) with locations of both substantial expansion (e.g., northwest India, northeast China) and decline (e.g., Russia). Combining these outputs with information on green (i.e., rainfall) and blue (i.e., surface and ground) water stress, we also examine to what extent irrigation has expanded unsustainably (i.e., in places already experiencing water stress). We find that more than half (52%) of irrigation expansion has taken place in regions that were already water stressed, with India alone accounting for 36% of global unsustainable expansion. These findings provide new insights into the evolving patterns of global irrigation with important implications for global water sustainability and food security. Recommended citation: Mehta, P., Siebert, S., Kummu, M. et al. Half of twenty-first century global irrigation expansion has been in water-stressed regions. Nat Water (2024). https://doi.org/10.1038/s44221-024-00206-9 Open-access peer reviewed publication available at https://www.nature.com/articles/s44221-024-00206-9 Files G_AEI_*.ASC were produced using the GMIA dataset[https://data.apps.fao.org/catalog/iso/f79213a0-88fd-11da-a88f-000d939bc5d8]. Files MEIER_G_AEI_*.ASC were produced using Meier et al. (2018) dataset [https://doi.pangaea.de/10.1594/PANGAEA.884744].

Dynamics of societal material stocks such as buildings and infrastructures and their spatial patterns drive surging resource use and emissions. Building up and maintaining stocks requires large amounts of resources; currently stock-building materials amount to almost 60% of all materials used by humanity. Buildings, infrastructures and machinery shape social practices of production and consumption, thereby creating path dependencies for future resource use. They constitute the physical basis of the spatial organization of most socio-economic activities, for example as mobility networks, urbanization and settlement patterns and various other infrastructures. This dataset features a detailed map of material stocks for the whole of Germany on a 10m grid based on high resolution Earth Observation data (Sentinel-1 + Sentinel-2), crowd-sourced geodata (OSM) and material intensity factors. Temporal extent The map is representative for ca. 2018. Data format Per federal state, the data come in tiles of 30x30km (see shapefile). The projection is EPSG:3035. The images are compressed GeoTiff files (*.tif). There is a mosaic in GDAL Virtual format (*.vrt), which can readily be opened in most Geographic Information Systems. The dataset features area and mass for different street types area and mass for different rail types area and mass for other infrastructure area, volume and mass for different building types Masses are reported as total values, and per material category. Units area in m² height in m volume in m³ mass in t for infrastructure and buildings Further information For further information, please see the publication or contact Helmut Haberl (helmut.haberl@boku.ac.at). A web-visualization of this dataset is available here. Visit our website to learn more about our project MAT_STOCKS - Understanding the Role of Material Stock Patterns for the Transformation to a Sustainable Society. Publication Haberl, H., Wiedenhofer, D., Schug, F., Frantz, D., Virág, D., Plutzar, C., Gruhler, K., Lederer, J., Schiller, G. , Fishman, T., Lanau, M., Gattringer, A., Kemper, T., Liu, G., Tanikawa, H., van der Linden, S., Hostert, P. (accepted): High-resolution maps of material stocks in buildings and infrastructures in Austria and Germany. Environmental Science & Technology Funding This research was primarly funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (MAT_STOCKS, grant agreement No 741950). ML and GL acknowledge funding by the Independent Research Fund Denmark (CityWeight, 6111-00555B), ML thanks the Engineering and Physical Sciences Research Council (EPSRC; project Multi-Scale, Circular Economic Potential of Non-Residential Building Scale, EP/S029273/1), JL acknowledges funding by the Vienna Science and Technology Fund (WWTF), project ESR17-067, TF acknowledges the Israel Science Foundation grant no. 2706/19.

Bioenergy villages can be defined as villages, municipalities, settlements or communities, which produce and use most of their energy from local bioenergy and other renewable energy sources. A bioenergy village approach has not been applied in Macedonia yet, and it is at a nascent stage of implementation in other South-Eastern European countries. This work aims to integrate a techno-economic, social and environmental assessment and an implementation strategy into a bioenergy village concept, which is not often seen in works dedicated to bioenergy villages and biomass based heating systems. The assessment was conducted by means of energy audit and project-related tools, whilst the strategy was composed by bioenergy working group meetings. Results show that a biomass based district heating system is a more attractive solution for heating several public buildings instead of a fossil fuelled system, with numerous associated benefits. Such concepts can be replicated with variety of renewables, thus contributing to sustainable development pathways of small communities.

AbstractThermochemical biorefineries for the production of chemicals and materials can play an important role in the bioeconomy. However, their economic viability is often questioned under the premise of the economy of scale. This paper presents a regional, modular biorefinery concept for the production of the platform chemicals hydroxymethylfurfural (HMF), furfural and phenols from the lignocellulosic perennial miscanthus, which can be cultivated on marginal and degraded areas. The paper focuses on the question of the minimum selling price of HMF and the optimal plant size for this purpose, using the region of Baden‐Württemberg, Germany, as an example. Based on small pilot plant results, a scalable process simulation was created via AspenPlus. This allows different scenarios and process combinations of this multi‐output biorefinery concept to be compared with each other. Using this, a minimum sales price for the main product HMF is calculated using methods of dynamic investment cost calculation according to the net present value method. Based on this, the plant capacity was scaled. The scenarios and sensitivity analyses show that, with an accuracy of ±15%, regional biorefineries could already offer platform chemicals at prices of 2.21–2.90 EUR/kg HMF at the current stage of development. This corresponds to three to four times the price of today's comparative fossil base chemicals and is thus a competitive option from the authors’ point of view. The local biomass and the heat prices were identified as the main influencing factors. As a result, the selection of the location will have a decisive influence on the economic viability of such concepts in the case of further development and optimization of the process in first demonstration plants.

Despite the promise conservation paleobiology holds for using geohistorical data and insights to solve conservation problems, training in the field typically does not equip students to be competent environmental problem solvers. The intention of this perspective piece is to start a conversation about how we might train conservation paleobiology students better, focusing on the competencies needed to promote deep engagement with “wicked” conservation problems that are difficult to solve. Ongoing conversations regarding design of academic programs in sustainability, a field allied with conservation science, can inform our discussion. The sustainability literature has defined an interrelated set of “core competencies” that go beyond general academic competencies to enable real-world sustainability problem solving: systems thinking, temporal thinking, normative thinking, strategic thinking, and interpersonal competence. Conservation paleobiology is usually taught within geology programs, where students are exposed to systems thinking and temporal thinking. However, the remaining competencies typically are absent or insufficiently developed. To infuse these competencies into conservation paleobiology curricula, we recommend: (1) enhancing connections with sustainability programs and encouraging a more cross-disciplinary approach to training; (2) developing a “menu” of concepts and methodologies for each competence from which to choose; and (3) recognizing that different skills are appropriate at different levels of education and experience. The proposed competency-based framework serves as a shared reference that can be used to develop pedagogies to better prepare conservation paleobiology students to navigate the wicked conservation challenges of our time.

In this study, our aim was to explore the potential energy savings obtainable from the recycling of 1 tonne of Construction and Demolition Waste (C&DW) generated in the Metropolitan City of Naples. The main fraction composing the functional unit are mixed C&DW, soil and stones, concrete, iron, steel and aluminium. The results evidence that the recycling option for the C&DW is better than landfilling as well as that the production of recycled aggregates is environmentally sustainable since the induced energy and environmental impacts are lower than the avoided energy and environmental impacts in the life cycle of recycled aggregates. This LCA study shows that the transition to the Circular Economy offers many opportunities for improving the energy and environmental performances of the construction sector in the life cycle of construction materials by means of internal recycling strategies (recycling C&DW into recycled aggregates, recycled steel, iron and aluminum) as well as external recycling by using input of other sectors (agri-food by-products) for the manufacturing of construction materials. In this way, the C&D sector also contributes to realizing the energy and bioeconomy transition by disentangling itself from fossil fuel dependence.