• Energy Research
• other engineering and technologies close
• 13. Climate action close
• 6. Clean water close
• CH close

The transition towards renewable energy is leading to an important strain on the energy grids. The question of designing and deploying renewable energy technologies in symbiosis with existing grids and infrastructure is arising. While current energy system models mainly focus on the energy transformation system or only investigate the effect on one energy vector grid, we present a methodology to characterize different energy vector grids and storage, integrated into the multi-energy and multi-sector modeling framework EnergyScope. The characterization of energy grids is achieved through a traditional energy technology and grid modeling approach, integrating economic and technical parameters. The methodology has been applied to the case study of a country with a high existing transmission infrastructure density, e.g., Switzerland, switching from a fossil fuel-based system to a high share of renewable energy deployment. The results show that the economic optimum with high shares of renewable energy requires the electric distribution grid reinforcement with 2.439 GW (+61%) Low Voltage (LV) and 4.626 GW (+82%) Medium Voltage (MV), with no reinforcement required at transmission level [High Voltage (HV) and Extra High Voltage (EHV)]. The reinforcement is due to high shares of LV-Photovoltaic (PV) (15.4 GW) and MV-wind (20 GW) deployment. Without reinforcement, additional biomass is required for methane production, which is stored in 4.8–5.95 TWh methane storage tanks to compensate for seasonal intermittency using the existing gas infrastructure. In contrast, hydro storage capacity is used at a maximum of 8.9 TWh. Furthermore, the choice of less efficient technologies to avoid reinforcement results in a 8.5%–9.3% cost penalty compared to the cost of the reinforced system. This study considers a geographically averaged and aggregated model, assuming all production and consumption are made in one single spot, not considering the role of future decentralization of the energy system, leading to a possible overestimation of grid reinforcement needs.

The black liquor is a byproduct of the kraft pulping process that contains more than half of the exergy content in the total woody biomass fed to the digester, representing a key supply of renewable energy to the pulping process. In this work, the conventional scenario of the black liquor use (i.e., concentration and combustion) is compared with the black liquor upgrading (via) gasification process for ammonia production in terms of economics, exergy efficiency and environmental impact. The combined energy integration and exergy analysis is used to identify the potential improvements that may remain hidden to the energy analysis alone, namely, the determination and mitigation of the process irreversibility. As a result, the exergy efficiencies of the conventional and the integrated cases average 40% and 42%, respectively, whereas the overall emission balance varies from 1.97 to −0.69 tCO2/tPulp, respectively. The negative CO2 emissions indicate the environmental benefits of the proposed integrated process compared to the conventional kraft pulp mill.

SummaryThe German government has adopted a law that requires sewage plants to go beyond the recovery of phosphorus from wastewater and to promote recycling. We argue that there is no physical global short‐ or mid‐term phosphorus scarcity. However, we also argue that there are legitimate reasons for policies such as those of Germany, including: precaution as a way to ensure future generations’ long‐term supply security, promotion of technologies for closed‐loop economics in a promising stage of technology development, and decrease in the current supply risk with a new resource pool.

Abstract The influence of profile height and orientation on the rate of anodic levelling was studied under controlled masstransport conditions in a flow cell using triangular shaped profiles made of nickel in a NaCl electrolyte. Experimental conditions were chosen so that levelling was carried out well below, close to and well above the limiting current for salt precipitation and results were compared to those predicted from theoretical calculations using FEM. It is found that the rate of levelling of microprofiles under limiting current conditions is independent of flow direction and corresponds to that theoretically predicted for primary or tertiary current distribution. The levelling of macroprofiles at the limiting current is slower and depends on flow direction. Levelling above the limiting current is mass transport controlled. For macroprofiles oriented parallel to flow direction, levelling is slower above the limiting current than at the limiting current.

<p>High temperature aquifer thermal energy storage (HT-ATES) can play a key role for a sustainable interplay between different energy sources and in the overall reduction of CO<sub>2</sub>emission. In this study, we numerically investigate the thermo-hydraulic processes of an HT-ATES in the Greater Geneva Basin (Switzerland). The main objective is to investigate how to handle the yearly excess of heat produced by a nearby waste-to-energy plant. We consider potential aquifers located in different stratigraphic units and design the model from available geological and geophysical data. Aquifer properties, flow conditions and well strategies are successively tested to evaluate their influence on the HT-ATES economic performance and environmental impact. This was achieved using a new open-access, user-friendly and efficient code that we also introduce here as a possible tool for geothermal applications.</p><p> </p><p>The results highlight the importance of thorough numerical simulations based on more realistic exploitation when designing HT-ATES systems. We show that relations between thermal performance and the shape of the injected thermal volume are generally hard to derive when complex well schedules are imposed because the injected/produced volumes may not be equal. Despite more complex storage strategies to comply with legal regulations, the shallower group of investigated aquifers in this study remains economically more suitable for storage up to 90ºC. In average four well doublets will be required to store the yearly excess of energy. The deeper group of investigated aquifers, however, become interesting for storage at higher temperatures.</p>

Abstract Switzerland has voted for a gradual nuclear phase-out, starting in 2019 with the decommissioning of a first nuclear reactor; however, there is still a debate about how the country will replace nuclear generation. Electricity markets are transitioning towards renewable sources such as hydro, wind and solar. The latter two could produce a mismatch between demand and supply. Combining renewables with storage is one way to address this challenge. This paper analyzes the feasibility of 100% renewable generation in Switzerland. We consider hydro and PV generation, combined with pumped hydro storage, to address the timing problem between demand and PV generation. We explore several combinations of installed solar capacity, reservoir levels and pumping capacity. Our findings indicate that given current technological development, Switzerland would need to double its pumping capacity, increase solar generation capacity by a factor between 13 and 25, while increasing reservoir size up to 100% depending on the installed solar capacity.

In order to link electrochemical performance degradation of the cathode in a large solid oxide fuel cell (SOFC) to the presence of pollutant species, a spatially-resolved study of contaminants was performed. Distribution maps of pollutants over the cell allowed to identify their sources. Besides chromium and silicon, sulfur was found as a major pollutant species. Its preferential reaction with strontium doped lanthanum cobaltite (LSC), forming strontium sulfate SrSO4, compared to strontium doped lanthanum manganite (LSM) is revealed here. When sulfur poisoning arises in combination with chromium, a sulfur-containing strontium chromate compound is formed.

The global energy demand is growing substantially. Clean and secure energy supply is a must for our civilization's sustainable development. Solar and wind energy is growing fast and can contribute significantly to meet the goals set by many countries to reduce greenhouse gas emissions. A deep and wide investigation of the environmental impact of solar and wind energy is important before any solar or wind plants' construction is made. In this study, the literature is reviewed to summarize the environmental impact of solar and wind energy systems in terms of the following factors; land use, water consumption, impact on biodiversity, visual and noise effects, health issues, and impact on micro climate. Although the benefits of solar and wind energy are obvious and great, negative perception of these technologies can inhibit their wide penetration in some regions. This review paper includes a critical and an inclusive analysis of solar and wind energy’s environmental impact and may serve as an important tool to conduct a proper environmental impact assessment. This critical analysis may serve also as a tool for developers, policy, and decision-when planning future solar and wind farms.