• Energy Research
• 12. Responsible consumption close
• 8. Economic growth close
• CN close
• DE close
• CA close

Shale gas, due to its clean-burning and efficient nature, is becoming an increasingly promising alternative energy resource. It is commonly held that promoting shale gas development will gradually play a significant role in meeting the energy needs of economic and social development as well as reducing harm to the environment. Given the significant implications, many countries are pursuing shale gas opportunities. However, numerous concerns have been raised about the economics of shale gas development, as it is difficult to evaluate. Accurately evaluating the economic viability of shale gas development to reduce investment risks and increase investment opportunity is the key issue that needs to be urgently addressed. This paper presents a systematic review and examination of the technical and economic evaluation techniques for the development of shale gas to provide an overview of their current status. Over time, some progress has been made in existing technical–economic evaluation techniques. It is worth noting that these techniques need to be further improved to more precisely assess the economic feasibility of developing shale gas for assisting investment decisions effectively. For this reason, various potentially useful ideas and approaches are presented to propose some potential improvement in evaluation techniques for shale gas development, which may materialize in possible future trends.

AbstractThe future European energy supply system will have a high share of renewable energy sources (RES) to meet the greenhouse gas emission policy of the European Commission. Such a system is characterized by the need for a strongly interconnected energy transport grid as well as a high demand of energy storage capacities to compensate the time fluctuating characteristic of most RE generation technologies. With the RE generators at the location of high harvest potential, the appropriate dimension of storage and transmission system between different regions, a cost efficient system can be achieved. To find the preferred target system, the optimization tool GENESYS (Genetic Optimization of a European Energy System) was developed. The example calculations under the assumption of 100% self-supply, show a need of about 2,500 GW RES in total, a storage capacity of about 240,000 GWh, corresponding to 6% of the annual energy demand, and a HVDC transmission grid of 375,000 GWkm. The combined cost for generation, storage and transmission excluding distribution, was estimated to be 6.87 ct/kWh.

Abstract The absorption refrigeration system driven by low grade heat sources, especially the waste heat sources, becomes more and more attractive in recent decades. However, most traditional absorption systems cannot achieve a high utilization rate of the waste heat with limited heat capacity. These systems are usually designed to obtain heat in the generator, which means that the waste heat sources cannot be utilized to the temperature lower than the generator temperature. This paper proposed a new structure heated by heat conduction oil in the generator and electric heating rings around the stripping section. This structure can simulate the temperature-distributed heat sources when the electric heating rings work. It can also simulate a traditional generator when the electric heating rings do not work. Influences of different heat distributions are analyzed in detail in this paper. The results show that the heat sources utilization rate will increase with the increase of the heat in the stripping section, while the coefficient of performance will be negatively affected by the increasing heat in the stripping section. By optimizing the heating structure, the coefficient of performance can be similar to that of a traditional system when the heat is just added in the middle and lower part of stripping section. The optimum utilization rate of heat sources in this test model can reach 1.8 times to that of a traditional system. Under this heating model, the lowest temperature required in the heating section is 82 °C when the heat conduction oil inlet temperature is 169 °C. It is much lower than the temperature inside the generator, which is 137.3 °C.

Abstract For biomass/waste fueled power plants, stricter regulations require a further reduction of the negative impacts on the environment caused by the release of pollutants and withdrawal of fresh water externally. Flue gas quench (FGQ) is playing an important role in biomass or waste fueled combined heat and power (CHP) plants, as it can link the flue gas (FG) cleaning, energy recovery and wastewater treatment. Enhancing water evaporation can benefit the concentrating of pollutant in the quench water; however, when FG condenser (FGC) is not in use, it results in a large consumption of fresh water. In order to deeply understand the operation of FGQ, a mathematic model was developed and validated against the measurements. Based on simulation results key parameters affecting FGQ have been identified, such as the flow rate and temperature of recycling water and the moisture content of FG. A guideline about how to reduce the discharge of wastewater to the external and the withdrawal of external water can be proposed. The mathematic model was also implemented into an ASPEN Plus model about a CHP plant to assess the impacts of FGQ on CHP. Results show that when the FGC was running, increasing the flow rate and decreasing the temperature of recycling water can result in a lower total energy efficiency.

Yes ; Utilizing seawater and sea-sand for producing ultra-high performance concrete (UHPC) can substantially reduce raw materials costs and alleviate the current freshwater and river sand resources shortage in coastal and marine areas. However, the corrosion risk to reinforcing fibers inside UHPC caused by chlorides in seawater and sea-sand cannot be ignored. In this study, a new type of sustainable UHPC composed of seawater and desalinated sea-sand (UHPSSC) reinforced with stainless profile, super-fine stainless wire (SSW) was developed. Its mechanical properties and chloride content were studied. The research results show that SSWs do not rust after immersion in seawater. The flexural and compressive strengths of UHPSSC incorporating 1.5% SSWs are 13.8MPa and 138.6MPa, respectively, and the flexural toughness of UHPSSC is increased by 428.9%, reaching the basic mechanical requirements of UHPC. The high specific surface area of SSW and enrichment of silica fume on its surface enhance the interfacial bond between fiber and matrix, further promoting the full play of the SSWs’ reinforcing mechanisms as proved by the decrease of the Ca/Si ratio at the SSW surface. The C-S-H gels with a high Ca/Si ratio within the ITZ as well as Friedel’s salt are conducive to immobilize chlorides, blocking the migration of chlorides through the matrix and further mitigating the risk of long-term chloride corrosion of SSWs. Overall, utilizing seawater and desalinated sea-sand in combination with SSWs can produce UHPC with improved strength and toughness, making it a suitable choice for applications where high durability and long-term mechanical performance is required.

Most of the existed works on the radio resource allocation (RRA) problem commonly assume the channel-state information (CSI) can be perfectly obtained by the transmission source. However, such assumption is not practical in the realistic wireless systems. In this work, we consider the practical implementation issues of resource allocation in orthogonal frequency division multiple access (OFDMA) two-way relay networks: the inaccuracy of channel-state information (CSI) available to the source. Instead, only the estimated channel status is known by the source. In this context, a joint optimization of subcarrier pairing and allocation, relay selection, and transmit power allocation is formulated in OFDMA two-way amplify-and-forward relay networks. Moreover, the objective of this work is to minimize the energy consumption of the overall system. Further, to ensure the quality of service (QoS) or data rate requirement, the energy consumption must be minimized without compromising the QoS. Therefore, by applying convex optimization techniques, energy-efficient algorithms are developed with the objective to minimize the total transmit power with guaranteeing the required data rates. Through simulation studies, energy consumption performance of the systems under the proposed schemes is investigated. It can be observed that our proposed scheme can improve the energy consumption performance of the considered system.

AbstractChina is under pressure to improve its agricultural productivity to keep up with the demands of a growing population with increasingly resource‐intensive diets. This productivity improvement must occur against a backdrop of carbon intensity reduction targets, and a highly fragmented, nutrient‐inefficient farming system. Moreover, the Chinese government increasingly recognizes the need to rationalize the management of the 800 million tonnes of agricultural crop straw that China produces each year, up to 40% of which is burned in‐field as a waste. Biochar produced from these residues and applied to land could contribute to China's agricultural productivity, resource use efficiency and carbon reduction goals. However competing uses for China's straw residues are rapidly emerging, particularly from bioenergy generation. Therefore it is important to understand the relative economic viability and carbon abatement potential of directing agricultural residues to biochar rather than bioenergy. Using cost‐benefit analysis (CBA) and life‐cycle analysis (LCA), this paper therefore compares the economic viability and carbon abatement potential of biochar production via pyrolysis, with that of bioenergy production via briquetting and gasification. Straw reincorporation and in‐field straw burning are used as baseline scenarios. We find that briquetting straw for heat energy is the most cost‐effective carbon abatement technology, requiring a subsidy of $7 MgCO2e−1 abated. However China's current bioelectricity subsidy scheme makes gasification (NPV $12.6 million) more financially attractive for investors than both briquetting (NPV $7.34 million), and pyrolysis ($−1.84 million). The direct carbon abatement potential of pyrolysis (1.06 MgCO2e per odt straw) is also lower than that of briquetting (1.35 MgCO2e per odt straw) and gasification (1.16 MgCO2e per odt straw). However indirect carbon abatement processes arising from biochar application could significantly improve the carbon abatement potential of the pyrolysis scenario. Likewise, increasing the agronomic value of biochar is essential for the pyrolysis scenario to compete as an economically viable, cost‐effective mitigation technology.

A key determinant and outcome of successful environmental education is ‘pro-environmental behavior’, i.e., behavior that involves conscious action to mitigate adverse environmental impacts at personal or community level, e.g., reducing resource consumption and waste generation, avoiding toxic substances, and organizing community awareness initiatives. However, some theorists have sought to move away from rationalist models of behavioral modification, towards holistic pedagogical initiatives that seek to develop action competence. In light of the global push towards achievement of the Sustainable Development Goals (SDGs), emerging evidence suggests that education initiatives should foster action competence so students may be equipped to contribute to sustainable development as part of their education. The UNESCO Education for Sustainable Development (ESD) Roadmap 2030 has also identified key priority areas to strengthen ESD in formal curricula. This article reports two informal environmental education initiatives for promoting action competence and pro-environmental behaviors in school-aged children. The authors recommend that formal education settings (e.g., schools) should incorporate self-directed, free-choice project-based learning to augment environmental education programs and promote students’ action competence for contribution to attainment of SDGs. To this end, we propose a Free-Choice Project-based Learning for Action Competence in Sustainable Development (ACiSD) Curriculum, comprising six implementation dimensions, namely: (1) project duration and teaming arrangements, (2) topic selection, (3) student support, (4) teacher support, (5) learning environments, and (6) digital access and equity. For each implementation dimension, we recommend action steps to help educators implement this curriculum in their own educational settings, with the aid of an illustrative worked example.