• Energy Research
• Restricted close
• Embargo close
• 12. Responsible consumption close
• 8. Economic growth close
• DE close
• CN close
• CA close

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

Abstract For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72–90% and total greenhouse gas reduction by 65–79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

Abstract Fodder for feeding pork and poultry requires a large amount of cultivated and processed agricultural crops, which are often related to greenhouse gas emissions from land-use change (LUC). Given the rapid growth in meat production in Brazil for domestic consumption and international export, the link between LUC emissions and consumption of pork and poultry meat is central to evaluating the role of Brazilian meat production and the implications for international climate policies. In this paper, we first estimate LUC emissions from soybean production destined to feed pork and poultry in Brazil during the period 2008–2012. Second, we allocate such emissions to domestic and international consumption of pork and poultry meat. Concerning international consumption, Brazilian export of meat to 189 countries is evaluated. Although the majority of the LUC emissions from soybean production are tied to the domestic consumption, 17% and 39% of the emissions embodied in Brazilian pork and poultry, respectively, are exported to other countries. The most prominent destinations of Brazilian pork and poultry in terms of embodied LUC emissions are Eastern Europe, Asia and South America. In the case of pork, the fluxes of emissions from Brazil to Ukraine (1.28 Mt CO2-eq) and Russia (1.18 Mt CO2-eq) are particularly large. In the case of poultry, the largest transfers of embodied emissions are from Brazil to developing countries and especially the Middle East. These results are relevant to environmental policies and international agreements aimed at achieving the sustainability of Brazil's meat sector.

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

In order to achieve the Paris Agreement goals of keeping the temperature rise well below 2 °C or even 1.5 °C, all countries would need to make fair and ambitious contributions to reducing emissions. A vast majority of countries have adopted reduction targets by 2030 in their Nationally Determined Contributions (NDCs). There are many alternative ways to analyze the fairness of national mitigation contributions. This article uses a model framework based on six equity principles of effort-sharing, to allocate countries’ reduction targets under global emissions scenarios consistent with meeting the Paris climate goals. It further compares these allocations with the NDCs. The analysis shows that most countries need to adopt more ambitious reduction targets by 2030 to meet 2 °C, and even more for 1.5 °C. In the context of 2 °C, the NDCs of the United States of America and the European Union lack ambition with respect to the approaches that emphasize responsibility; China's NDC projection falls short of satisfying any approach in 2030. In the context of 1.5 °C, only India, by implementing its most ambitious efforts by 2030, could be in line with most equity principles. For most countries, the NDCs would use most of their allowed emissions space for the entire 21 st century by 2030, posing a major challenge to transform to a pathway consistent with their fair contributions in the long-term.

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.

The technological development of preparing bio-oil from low-temperature hydrothermal conversion of agricultural and forestry waste has positive significance for alleviating the shortage of oil energy supply and reducing environmental pollution. This paper selects typical oxides (Al2O3, CeO2, MgO, SiO2, TiO2, and ZnO) as catalysts to set up a low-temperature (220 °C) hydrothermal conversion process of cotton stalk containing pretreatment processes including chopping. For moderate amplification estimation, lab-scale experimental data is used as a benchmark for calculation, and the functional unit for this study is set to be a 1 kg bio-oil product. The results suggest that the cerium dioxide-involved process with the highest bio-oil yield and highest synthetic consumption, and the silica-involved process with the lowest bio-oil yield, caused the highest environmental impact, resulting in greenhouse gas (GHG) emissions of 67.729 kg CO2e/kg and 60.001 kg CO2e/kg, respectively. It indicates that catalysts need to consider the balance between synthetic consumption and catalytic performance. Magnifying lab-scale data to an industrial scale using scale-up frameworks introduces a low model uncertainty, as the practical value had little effect on the overall evaluation results. However, existing equipment data should be used to reduce the uncertainty of the model itself. The environmental sustainability of bio-oil production by low-temperature hydrothermal liquefaction still needs to be improved, especially by catalyst recovery and bio-oil yield improvement.