• Energy Research
• Open Access close
• natural sciences close
• CN close
• DK close

AbstractThe fluid flow characteristics in shale fractures are of great significance for shale gas reservoir evaluation and exploitation. In this study, artificial tension fractures in shale were used to simulate the hydraulic fractures formed by fracturing, and a gas flow test under different pressure gradients was conducted. The nonlinear gas flow and stress‐dependent permeability characteristics were analyzed. The experimental results show the following: (a) CO2 flow in shale fractures exhibits strong nonlinearity. Forchheimer's law, which considers gas compressibility, satisfactorily describes the nonlinear relationship between the flow rate and the pressure gradients in shale fractures. (b) The permeability sensitivity of shale fractures under stress is very strong, and the exponential relationship better describes the pressure dependency of the permeability for the tested shale samples. The permeability of the shale fractures is similar when measured parallel or perpendicular to bedding. Furthermore, the pressure dependence of fractures in shale obeys the Walsh permeability model. (c) As the effective stress increases, the nonlinear flow behavior appears earlier. Based on the Reynolds number and the nonlinear coefficient, a friction factor model is proposed. (d) The normalized transmissivity exhibits a strong correlation with the Reynolds number. CO2 flow through shale fractures is generally dominated by transitional flow. The critical Reynolds number ranges from 1.8 to 102.88 and decreases with increasing effective stress.

Pool boiling in porous media has been applied in various thermal management systems by using latent heat and increasing the heat transfer area and thermal conduction path to improve the heat transfer performance. In mechanical equipment, vibration is an inevitable problem due to reasons such as engine operation and high-speed relative motion between transmission system components, which causes the system components to be affected by vibration forces or vibration accelerations. This study focuses on a review of published articles about the effects of mechanical vibration on the characteristics of boiling process in porous media by two aspects: heat transfer performance and bubble dynamics. Heat transfer coefficient (HTC) and critical heat flux are two main parameters used to measure the boiling heat transfer characteristics of porous media. For bubble dynamics investigations, properties such as migration, fragment, coalescence, departure diameter and frequency are the focus of research attention. Different mechanical vibration parameters, i.e., direction, frequency, and amplitude, will have different effects on the above characteristics. It is worth mentioning that the greatest influence occurs under resonance conditions, and this has been verified through experimental and simulation calculations. This review highlights the importance of considering mechanical vibrations in the design and optimization of porous media systems for efficient heat transfer applications. Further research is warranted to explore the detailed mechanisms and optimize the vibration parameters for enhanced heat transfer performance in thermal management systems using porous media.

ABSTRACTPlant heme oxygenases (HOs) regulate biosynthesis of phytochrome which accounts for photo‐acceptance and ‐morphogenesis. Recent studies have demonstrated that plant HOs also regulate many other physiological processes including response to environmental stimuli. To elucidate the mechanism by which HOs regulate plant adaptation to heavy metal exposure, three novel HOs genes were isolated from rapeseed (Brassica napus) and their expression patterns were analysed. Alignment of deduced protein sequences revealed that the three BnHOs share high identity with their corresponding orthologos (AtHO1‐3) from Arabidopsis. To investigate whether the BnHO regulates plant tolerance to Hg toxicity, we constructed B. napus transgenic plants overexpressing BnHO‐1. Under Hg stress, the transgenic plants had 1.41–1.59 folds higher biomass than the untransformants. However, overexpression of BnHO‐1 resulted in less accumulation of Hg in some lines of transformants than in untransformants. The transgenic plants show lower abundance of reactive oxygen species and attenuated oxidative injury compared with the untransgenic plants. We cloned the promoter sequences of BnHO‐1 from B. napus. Analysis revealed that the 1119 bp fragment contains a conserved Cd responsive element (CdRE) and others responding to multiple environmental stimuli. Transient expression in tobacco leaves showed differential responses to heavy metals (Zn, Cu, Pb, Hg and Cd).

A range of optical fibre-based sensors for the measurement of ethanol, primarily in aqueous solution, have been developed and are reviewed here. The sensing approaches can be classified into four groups according to the measurement techniques used, namely absorption (or absorbance), external interferometric, internal fibre grating and plasmonic sensing. The sensors within these groupings can be compared in terms of their characteristic performance indicators, which include sensitivity, resolution and measurement range. Here, particular attention is paid to the potential application areas of these sensors as ethanol production is globally viewed as an important industrial activity. Potential industrial applications are highlighted in the context of the emergence of the internet of things (IoT), which is driving widespread utilization of these sensors in the commercially significant industrial and medical sectors. The review concludes with a summary of the current status and future prospects of optical fibre ethanol sensors for industrial use.

AbstractPreparation of uniform, spherical Li4Ti5O12 with high tap density is significant to achieve a high volumetric energy density in lithium‐ion batteries. Herein, Li4Ti5O12 microspheres with variable tap density and tunable size distribution were synthesized by a newly designed industrial spray‐drying approach. The slurry concentration, sintering time, sintering conditions after spraying, and the effect of lithium/titanium molar ratio on the lithium‐ion (Li+) storage capability were investigated. A narrow particle size distribution of around 10 μm and a high tap density close to 1.4 g cm−3 of the Li4Ti5O12 spheres can be obtained under the optimized conditions. The Li4Ti5O12 spheres can deliver a much higher capacity of 168 mAh g−1 at a rate of 1 C and show a high capacity retention of 97.7 % over 400 cycles. The synthetic conditions are confirmed to be critical for improving the electron conductivity and Li+ diffusivity by adjusting the crystal and spatial structures. As‐prepared high‐performance Li4Ti5O12 is an ideal electrode for lithium‐ion batteries or capacitors; meanwhile, the presented approach is also applicable for preparing other kind of spherical materials.

The purpose of this study was to assess the extent to which agricultural farms meet the requirements for sustainable agritourism in Zimbabwe. This study was motivated by the realisation that despite that the country is agro-based and has great potential to become an agritourism destination, the country is still lagging in agritourism development. The conceptual framework for understanding agritourism and the Triple Bottom Line (TBL) approach was applied. In-depth interviews were conducted with thirty-four (34) farmers who were purposively selected from the Manicaland and Mashonaland provinces of Zimbabwe. Data collection was conducted from October 2020 to June 2021. Thematic content analysis aided by Nvivo 12 software was used to analyse the data. The results revealed that the sampled farms meet at least one of the requirements for sustainable agritourism. However, there is a lack of diversity in both core and peripheral agritourism activities on the farms. The farmers are recommended to increase agritourism activities through sustainable utilization of the existing farm resources. The study provides the relevant stakeholders with information on areas of improvement for agritourism growth in the country and a baseline for future investigations into the prospects of agritourism in Zimbabwe. The main limitation of this study was the use of a framework for understanding agritourism that was developed in a developed world context. Development of a framework for understanding agritourism in a developing world context is recommended for future research.

Large amounts of CO2 from human socioeconomic activities threaten environmental sustainability. Moreover, uncontrolled resource use and lack of relevant technology exacerbate this issue. For this reason, carbon capture, utilization, and storage (CCUS) technology has gained worldwide attention. Many scholars have researched CCUS, but few have used CCUS patent bibliometric analysis from a unified perspective. This article aims to provide a conclusive analysis for CCUS researchers and policymakers, as well as summarize the innovation trends, technological distribution, and topic evolution. Based on 11,915 pieces of patent data from the Derwent Innovations Index, we used bibliometric analysis and data mining methods to conduct research on four dimensions: overall trend, geographical distribution, patentees, and patent content. The results of this article are as follows. CCUS has entered a rapid development stage since 2013. Patents are mainly distributed geographically in China, the US, and Japan, especially in heavy industries such as energy and electricity. Large enterprises hold patents with a relatively stable network of cooperators and attach great importance to international patent protection. A total of 12 topics were identified through clustering, and these topics gradually shifted from technicalities to commercialization, and from industrial production to all aspects of people’s daily lives.