• Energy Research
• Open Access close
• CN close
• ES close
• DE close
• CA close

Microalgae are recognized as a third generation feedstock for biofuel production due to their rapid growth rates and lignin-free characteristics. In this study, a lipid extracted microalgal biomass residues was used as the raw material to produce isoprene, α-pinene and β-pinene with an engineered E. coli strain. We adopted an optimal sulfuric acid hydrolysis method (1:7 ratio of solid to acid solution, 32% (w/v) concentration of sulfuric acid solution at 90 °C for 90 min) to efficiently convert holocellulose into glucose efficiently (6.37 g/L). Futhermore, we explored a novel detoxification strategy (phosphoric acid/calcium hydroxide) to remove inhibitors and notably acetic acid, furfural and 5-hydroxymethylfurfural (5-HMF) were reduced by 5.32%, different number given later 99.19% and 98.22%, respectively. Finally, the fermentation concentrations of isoprene (223.23 mg/L), α-pinene (382.21 μg/L) and β-pinene (17.4 mg/L) were achieved using the detoxified hydrolysate as the carbon source, equivalent to approximately 86.02%, 90.16% and 88.32% of those produced by the engineered E. coli strain fermented on pure glucose, respectively.

KOF Working Papers, 327

Plug-in hybrid electric vehicles (PHEVs) have a larger battery and can replace a certain amount of conventional fossil fuels with grid electricity, which differs from the traditional hybrid electric vehicles (HEVs). The application of the onboard electrical energy significantly influences the energy utilization efficiency and thus impacts the fuel economy. In this paper, the basic PHEV operation modes are defined as pure electric driving (PED), hybrid driving charge depleting (HDCD) and hybrid driving charge sustaining (HDCS) based on the battery state of charge (SoC) profile. For a plug-in hybrid electric bus (PHEB), three different energy management strategies, which are combined with two or three of the basic operation modes, are put forward and comparatively examined based on simulation models. If some trip information can be approximately known in advance such as the trip distance and the mean power demand, the PED + HDCD + HDCS strategy comprised optimally of the PED mode, the HDCD mode and the HDCS mode would be the best energy management strategy.

AbstractThe planetary boundary framework constitutes an opportunity for decision makers to define climate policy through the lens of adaptive governance. Here, we use the DICE model to analyze the set of adaptive climate policies that comply with the two planetary boundaries related to climate change: (1) staying below a CO2 concentration of 550 ppm until 2100 and (2) returning to 350 ppm in 2100. Our results enable decision makers to assess the following milestones: (1) a minimum of 33% reduction of CO2 emissions by 2055 in order to stay below 550 ppm by 2100 (this milestone goes up to 46% in the case of delayed policies); and (2) carbon neutrality and the effective implementation of innovative geoengineering technologies (10% negative emissions) before 2060 in order to return to 350 ppm in 2100, under the assumption of getting out of the baseline scenario without delay. Finally, we emphasize the need to use adaptive path-based approach instead of single point target for climate policy design.

El presente artículo surge de la necesidad de desvelar la influencia del desarrollo turístico en las dimensiones del desarrollo sostenible de la comunidad de Caibarién (Cuba). La información se obtuvo mediante revisión documental y entrevistas semi estructuradas. Los fundamentos teóricos y metodológicos que soportan el tratamiento de este trabajo se estructuran a partir de la producción científica relativa a los temas del desarrollo turístico y el turismo sostenible. Los principales resultados mostraron que la estrategia de desarrollo de Gaviota S.A en los Cayos de Villa Clara, influye indirectamente en la sostenibilidad de la comunidad de Caibarién, lo cual coincide con lo que plantea la literatura académica y presenta su pertinencia también para el caso de Cuba, cuya organización socioeconómica y política se distancia del paradigma neoliberal global. Si bien existen algunas pautas que muestran una tendencia hacia el desarrollo sostenible, aún se identifican aspectos negativos en el modelo de desarrollo turístico que habrán de ser considerados tanto en futuras investigaciones como en sus implicaciones prácticas en la industria turística de Cuba y de otras latitudes. This article arises from the need to reveal the influence of tourism development on the dimensions of sustainable development in the community of Caibarién, Cuba. The information was obtained through documentary review and semi-structured interviews. The theoretical and methodological foundations that support the treatment of the subject are structured from the scientific production related to the topics of tourism development and sustainable tourism. The main results showed that the development strategy of Gaviota SA in the Villa Clara Keys, indirectly influences the sustainability of the Caibarién community, which coincides with what is stated in the academic literature and is also relevant for the case of Cuba, whose socio-economic and political organization distances itself from the global neoliberal paradigm. Although there are elements that show a trend towards sustainable development, negative aspects were still identified as a consequence of the presence of tourism development that will have to be considered both in future research and in its practical implications in the tourism industry of the Island and of other latitudes.

The annual production of plastic waste worldwide has doubled in just two decades, with approximately 390 million tonnes of plastic waste now being generated. In this context, the construction industry must move towards the development of new, more sustainable materials made under circular economy criteria. In this work, a physico-mechanical characterisation of gypsum composites with the incorporation of high-density polyethylene (HDPE) waste, replacing 2–4–6–8–10% by volume of the original raw material, has been conducted. The results show how the incorporation of these plastic wastes improves the water resistance of the gypsum material without additions, as well as producing a decrease in thermal conductivity and greater resistance to impact. On the other hand, it has been found that, as the percentage of recycled raw material added increases, the mechanical resistance to bending and compression decreases, leading to fracture due to a lack of cohesion between the matrix and the waste. Nevertheless, in all the cases studied, mechanical strengths higher than those established by the EN 13279-2 standard were obtained. Thus, the results confirm the viability of these secondary raw materials to be used in the development of new products for sustainable building, especially in the design of prefabricated panels for false ceilings.

Abstract The improvement of thermodynamic efficiency of power plants is of great interest for the whole energy industry. The use of Kalina cycle has a great potential to improve the thermal efficiency of a nuclear power plant. This cycle uses a mixture of ammonia and water as working fluid. In this paper, we discuss the development of an Ammonia-Water mixture Property Code (AWProC). The estimation of the mixture properties are based on the Gibbs free energy functions. The code is verified and validated against experimental data available in the literature and REFPROP code. It is shown that AWProC can accurately estimate the thermodynamic properties of ammonia-water mixtures over a wide range of conditions, including high temperature and pressure regions. The code is then used to investigate the feasibility of applying the Kalina cycle to a typical Pressurizer Water Reactor (PWR) plant as an effective way to improve the plant efficiency. The fundamental of Basic-Kalina (B-K) cycle is described in detail firstly. Then, two modified configurations, Recuperation-Kalina (R-K) and Flash-Kalina (F-K) cycles respectively, are proposed for a typical 1000 MWe PWR. The simulation results indicate that the R-K type cycle can reach about 31.2% efficiency with simple equipment requirements, while the F-K type cycle can reach efficiencies up to about 34.8%, but at the expenses of a slightly more complex design. The present work demonstrates the applicability of the Kalina cycle as a way to improve the thermal efficiency of a nuclear power plant. This concept is meaningful for improving nuclear power plants economic and competitiveness.