• Energy Research
• Restricted close
• Open Source close
• ES close
• EU close
• CN close

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

Abstract Thermal energy storage (TES) systems are growing to a relevant role in solar cooling applications. Hence, high energy density is a desirable property of the TES system. Phase change materials (PCM) helps to increase this characteristic. A high temperature pilot plant able to test different types of TES systems and materials was designed and built at the University of Lleida (Spain). This pilot plant is composed mainly of three parts: heating system, cooling system, and different storage tanks. Two identical storage tanks based on the shell-and-tubes heat exchanger, one of them including 196 squared fins in the bundle of the tubes and the other without, were experimentally tested. Hydroquinone was selected as the storage material, having a latent heat of 205 kJ/kg and a phase change temperature between 168 and 173 °C. The aim of this paper is to test experimentally, and compare the average effectiveness of the TES systems analyzed using PCM for solar cooling and refrigeration applications. It was found out that for the same tank configurations (shell-and-tubes) even changing drastically the dimensions of the tank or the number and the diameter of the tubes, the average effectiveness curve proposed in the literature fits well with the results showed here.

AbstractReview: 105 refs.

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

beta-Carotene and six xanthophylls (lutein, neoxanthin, violaxanthin, luteoxanthin, cryptoxanthin, and echinenone) have been identified and semiquantitatively or quantitatively determined in musts and port wines for the first time. An HPLC method was developed and compared with that of one based on thin layer cromatography with scanning densitometry. The most abundant carotenoids present in red grape varieties are beta-carotene and lutein. In wines, significant quantities of violaxanthin, luteoxanthin, and neoxanthin were found. This study was done with berries (skin and pulp), musts, and fortified wines. Some experiments were performed to follow carotenoid content from grapes to wines. Although the levels of beta-carotene and lutein found in fortified wines were lower than those found in musts, other xanthophylls, such as neoxanthin, violaxanthin, and luteoxanthin, exist in appreciable amounts in young ports.

Artículos en revistas In this paper we apply stochastic dual dynamic programming decomposition to a nonconvex multistage stochastic hydrothermal model where the nonlinear water head effects on production and the nonlinear dependence between the reservoir head and the reservoir volume are modeled. The nonconvex constraints that represent the production function of a hydro plant are approximated by McCormick envelopes. These constraints are split into smaller regions and the McCormick envelopes are used for each region. We use binary variables for this disjunctive programming approach and solve the problem with a decomposition method. We resort to a variant of the L-shaped method for solving the MIP subproblem with binary variables at any stage inside the stochastic dual dynamic programming algorithm. A realistic large-scale case study is presented. info:eu-repo/semantics/publishedVersion

Artículos en revistas Liberalization policies, the challenges of integrating distributed generation resources, and the recent flattening of electricity demand due to the economic crisis and technological change have led to lower returns for European electricity suppliers. Innovative and sustainable business models are needed to serve electricity customers while reflecting the operational needs of the system and maintaining supplier financial viability. This paper describes a novel model of Integrated Energy Services that encompasses distributed generation (DG) and demand response (DR) resources for industrial customers. We further reflect on some of the market opportunities and regulatory drivers for the development of similar schemes across Europe. info:eu-repo/semantics/publishedVersion

Abstract A Gas–Solid Vortex Reactor (GSVR), in literature also referred to as Rotating Fluidized Bed in Static Geometry (RFB-SG), is a promising reactor type for Process Intensification (PI) with respect to reactor volume reduction. Although replacing gravitational by centrifugal force has been considered since the seventies, the hydrodynamics of the reactor flow and the bed behavior remain largely unknown. In the present work experiments have been carried out in a cold flow GSVR with diameter of 0.54 m, length of 0.1 m and 36 inlet slots of 2 mm. Gas injection velocities of 55–111 m/s and particles with densities of 950–1800 kg/m 3 and diameters of 1–2 mm have been applied. Depending on solids density, particle diameter and gas injection velocity the bed behavior can be considered as stable, semi-stable or unstable. For semi-stable and stable flow regimes the effect of the above process conditions on the maximum solids capacity was investigated. With increasing solids density, the bed stability considerably decreases, while the maximum solids capacity increases. By increasing the gas injection velocity, both the bed stability and the maximum solids capacity increase. Once bed stability is accomplished, a further increase of the gas injection velocity does not affect the maximum solids capacity. With increasing particle diameter, the bed stability decreases while the maximum solids capacity increases.