• Energy Research
• CN close
• EU close
• BE close
• Energies close

Numerical simulations are performed within the time domain to investigate the dynamic behaviors of an SPAR-type FOWT under wave group conditions. Towards this goal, the OC3 Hywind SPAR-type FOWT is adopted, and a JONSWAP (Joint North Sea Wave Project)-based wave group is generated by the envelope amplitude approach. The FOWT motion under wave group conditions, as well as the aerodynamic, hydrodynamic, and mooring performances, is simulated by our established in-house code. The rotating blades are modelled by the blade element momentum theory. The wave-body interaction effect is calculated by the three-dimensional potential theory. The mooring dynamics are also taken into consideration. According to the numerical results, the SPAR buoy motions are slightly increased by the wave group, while the heave motion is significantly amplified. Both the aerodynamic performance and the mooring tension are also influenced by the wave group. Furthermore, the low-frequency resonant response could be more easily excited by the wave group.

Numerical simulations are performed within the time domain to investigate the dynamic behaviors of an SPAR-type FOWT under wave group conditions. Towards this goal, the OC3 Hywind SPAR-type FOWT is adopted, and a JONSWAP (Joint North Sea Wave Project)-based wave group is generated by the envelope amplitude approach. The FOWT motion under wave group conditions, as well as the aerodynamic, hydrodynamic, and mooring performances, is simulated by our established in-house code. The rotating blades are modelled by the blade element momentum theory. The wave-body interaction effect is calculated by the three-dimensional potential theory. The mooring dynamics are also taken into consideration. According to the numerical results, the SPAR buoy motions are slightly increased by the wave group, while the heave motion is significantly amplified. Both the aerodynamic performance and the mooring tension are also influenced by the wave group. Furthermore, the low-frequency resonant response could be more easily excited by the wave group.

To optimize energy structure and efficiently utilize renewable energy sources, it is necessary to establish a new electrical power–gas mutual transformation virtual power plant that has low-carbon benefits. To promote the economic and low-carbon operation of a virtual power plant and reduce uncertainty regarding the use of new energy, a multi-timescale (day-ahead to intraday) optimal scheduling model is proposed. First, a basic model of a new interconnected power–gas virtual power plant (power-to-gas demand response virtual power plant, PD-VPP) was established with P2G and comprehensive demand response as the main body. Second, in response to the high volatility of new energy, a day-ahead to intraday multi-timescale collaborative operation optimization model is proposed. In the day-ahead optimization period, the next day’s internal electricity price is formulated, and the price-based demand response load is regulated in advance so as to ensure profit maximization for the virtual power plant. Based on the results of day-ahead modeling, intraday optimization was performed on the output of each distributed unit, considering the cost of the carbon emission reductions to achieve low-carbon economic dispatch with minimal operating costs. Finally, several operation scenarios are established for a simulation case analysis. The validity of the proposed model was verified via comparison.

To optimize energy structure and efficiently utilize renewable energy sources, it is necessary to establish a new electrical power–gas mutual transformation virtual power plant that has low-carbon benefits. To promote the economic and low-carbon operation of a virtual power plant and reduce uncertainty regarding the use of new energy, a multi-timescale (day-ahead to intraday) optimal scheduling model is proposed. First, a basic model of a new interconnected power–gas virtual power plant (power-to-gas demand response virtual power plant, PD-VPP) was established with P2G and comprehensive demand response as the main body. Second, in response to the high volatility of new energy, a day-ahead to intraday multi-timescale collaborative operation optimization model is proposed. In the day-ahead optimization period, the next day’s internal electricity price is formulated, and the price-based demand response load is regulated in advance so as to ensure profit maximization for the virtual power plant. Based on the results of day-ahead modeling, intraday optimization was performed on the output of each distributed unit, considering the cost of the carbon emission reductions to achieve low-carbon economic dispatch with minimal operating costs. Finally, several operation scenarios are established for a simulation case analysis. The validity of the proposed model was verified via comparison.

Based on the energy conversion equation and dynamic power model of the semi-transparent crystalline silicon photovoltaic (PV) window (ST-PVW), through an iterative coupling solution to the operating temperature of the cell, a thermal-electric coupling calculation method for the ST-PVW is provided, and, combined with experiments, the method model was verified. Based on this model, the influence of PV cell coverage rate (PVR) on the thermal performance of the ST-PVW was studied. According to the simulation results, in summer, the heat gain of the ST-PVW decreases with the increase of PVR, and in winter, the amount of heat loss increases with the increase of PVR. For the four cities of Guangzhou, Nanjing, Beijing and Harbin, when the PVR is 1, 0.60 to 0.64, 0.28 to 0.32 and 0.26 to 0.30, respectively, the annual power consumption of the air conditioner can reach the minimum, and when the PVR is 0.16 to 0.17, 0.24 to 0.25, 0.22 to 0.23 and 0.19 to 0.20, respectively, the amount of electricity generated can just offset the power consumption of the air conditioner during the day.

Based on the energy conversion equation and dynamic power model of the semi-transparent crystalline silicon photovoltaic (PV) window (ST-PVW), through an iterative coupling solution to the operating temperature of the cell, a thermal-electric coupling calculation method for the ST-PVW is provided, and, combined with experiments, the method model was verified. Based on this model, the influence of PV cell coverage rate (PVR) on the thermal performance of the ST-PVW was studied. According to the simulation results, in summer, the heat gain of the ST-PVW decreases with the increase of PVR, and in winter, the amount of heat loss increases with the increase of PVR. For the four cities of Guangzhou, Nanjing, Beijing and Harbin, when the PVR is 1, 0.60 to 0.64, 0.28 to 0.32 and 0.26 to 0.30, respectively, the annual power consumption of the air conditioner can reach the minimum, and when the PVR is 0.16 to 0.17, 0.24 to 0.25, 0.22 to 0.23 and 0.19 to 0.20, respectively, the amount of electricity generated can just offset the power consumption of the air conditioner during the day.

Fluidization of non-spherical particles is a common process in energy industries and chemical engineering. Understanding the fluidization of non-spherical particles is important to guide relevant processes. There already have been numerous studies which investigate the behaviors of different non-spherical particles during fluidization, but the investigations of the fluidization of polyhedral particles do not receive much attention. In this study, the investigation of the fluidization of polyhedral particles described by the polyhedron approach is conducted with a numerical CFD-DEM method. Experiments of the fluidization of three kinds of polyhedral particles are conducted under the same condition with corresponding simulations to validate the accuracy of our CFD-DEM model. The results indicate that our CFD-DEM model with the polyhedron approach can predict the behaviors of polyhedral particles with reasonable accuracy. Fluidization behaviors of different polyhedral particles are also investigated in this study. Compared to spherical particles, the motion of polyhedral particles is stronger, and mixing degree is higher under the same fluidization gas velocity.

Fluidization of non-spherical particles is a common process in energy industries and chemical engineering. Understanding the fluidization of non-spherical particles is important to guide relevant processes. There already have been numerous studies which investigate the behaviors of different non-spherical particles during fluidization, but the investigations of the fluidization of polyhedral particles do not receive much attention. In this study, the investigation of the fluidization of polyhedral particles described by the polyhedron approach is conducted with a numerical CFD-DEM method. Experiments of the fluidization of three kinds of polyhedral particles are conducted under the same condition with corresponding simulations to validate the accuracy of our CFD-DEM model. The results indicate that our CFD-DEM model with the polyhedron approach can predict the behaviors of polyhedral particles with reasonable accuracy. Fluidization behaviors of different polyhedral particles are also investigated in this study. Compared to spherical particles, the motion of polyhedral particles is stronger, and mixing degree is higher under the same fluidization gas velocity.