• Energy Research
• Open Access close
• CN close
• FR close

Abstract. The impact of multiphase reactions involving nitrogen dioxide (NO2) and aromatic compounds was simulated in this study. A mechanism (CAPRAM 2.4, MODAC Mechanism) was applied for the aqueous phase reactions, whereas RACM was applied for the gas phase chemistry. Liquid droplets were considered as monodispersed with a mean radius of 0.1 µm and a liquid content (LC) of 50 µg m-3. The multiphase mechanism has been further extended to the chemistry of aromatics, i.e. reactions involving benzene, toluene, xylene, phenol and cresol have been added. In addition, reaction of NO2 with dissociated hydroxyl substituted aromatic compounds has also been implemented. These reactions proceed through charge exchange leading to nitrite ions and therefore to nitrous acid formation. The strength of this source was explored under urban polluted conditions. It was shown that it may increase gas phase HONO levels under some conditions and that the extent of this effect is strongly pH dependent. Especially under moderate acidic conditions (i.e. pH above 4) this source may represent more than 75% of the total HONO/NO2 - production rate, but this contribution drops down close to zero in acidic droplets (as those often encountered in urban environments).

AbstractHydrodynamics plays a major role in wet grinding processes used to produce nanoparticles, but its influence on the mechanisms of fragmentation is not fully understood. The focus is on hydrodynamics in the gap between two grinding beads. Using particle image velocimetry in a large‐scale experiment, the velocity field between the beads has been investigated when the beads get closer (down to one‐tenth of their radius). Different configurations have been studied, varying from frontal approach to tangential collision. Finally, a capture probability of suspended particles has been estimated.

SignificanceEstimates of nutrient allocation in different plant tissues and the relationships between the nutrient contents and photosynthetic capacity are critical to predicting ecosystem carbon sequestration under global change. Here, we provide an assessment of large-scale patterns of community-level nitrogen and phosphorus concentrations in different plant tissues and then examine how nutrient allocations are coupled with plant productivity. The results show that nutrient concentrations in leaves are less responsive to abiotic environments than those in woody stems and roots (stable leaf nutrient concentration hypothesis); the relationships between vegetation primary productivity and leaf nutrient contents are stronger when less nutrients are allocated to the woody tissues (productivity–nutrient allocation hypothesis) and are stronger in deciduous than in evergreen vegetation (productivity–leaf lifespan hypothesis).

A promising technology for renewable energy is energy piles used to heat and cool buildings. In this research, the effects of bio-cementation via microbially induced calcite precipitation (MICP) using mixed calcium and magnesium sources and the addition of fibres on the thermal conductivity of soil were investigated. Firstly, silica sand specimens were treated with cementation solutions containing different ratios of calcium chloride and magnesium chloride to achieve maximum thermal conductivity improvement. Three treatment cycles were provided, and the corresponding thermal conductivity was measured after each cycle. It was found that using 100% calcium chloride resulted in the highest thermal conductivity. This cementation solution was then used to treat bio-cemented soil samples containing fibres, including polyethylene, steel and glass fibres. The fibre contents used included 0.5%, 1.0% and 1.5% of the dry sand mass. The results show that the glass fibre samples yielded the highest thermal conductivity after three treatment cycles, and SEM imaging was used to support the findings. This research suggests that using MICP as a soil improvement technique can also improve the thermal conductivity of soil surrounding energy piles, which has high potential to effectively improve the efficiency of energy piles.

Abstract Motivation: The steady growth of the number of available protein structures has constantly motivated the development of new algorithms for detecting structural correspondences in proteins. Detecting structural equivalences in two or more proteins is computationally demanding as it typically entails the exploration of the combinatorial space of all possible amino acid pairings in the parent proteins. The search is often aided by the introduction of various constraints such as considering protein fragments, rather than single amino acids, and/or seeking only sequential correspondences in the given proteins. An additional challenge is represented by the difficulty of associating to a given alignment, a reliable a priori measure of its statistical significance. Results: Here, we present and discuss MISTRAL (Multiple STRuctural ALignment), a novel strategy for multiple protein alignment based on the minimization of an energy function over the low-dimensional space of the relative rotations and translations of the molecules. The energy minimization avoids combinatorial searches and returns pairwise alignment scores for which a reliable a priori statistical significance can be given. Availability: MISTRAL is freely available for academic users as a standalone program and as a web service at http://ipht.cea.fr/protein.php. Contact: michelet@sissa.it Supplementary information: Supplementary data are available at Bioinformatics online.

Pedestrian inertial navigation technology plays an important role in indoor positioning technology. However, low-cost inertial sensors in smart devices are affected by bias and noise, resulting in rapidly increasing and accumulating errors when integrating double acceleration to obtain displacement. The data-driven class of pedestrian inertial navigation algorithms can reduce sensor bias and noise in IMU data by learning motion-related features through deep neural networks. Inspired by the RoNIN algorithm, this paper proposes a data-driven class algorithm, RBCN-Net. Firstly, the algorithm adds NAM and CBAM attention modules to the residual network ResNet18 to enhance the learning ability of the network for channel and spatial features. Adding the BiLSTM module can enhance the network’s ability to learn over long distances. Secondly, we construct a dataset VOIMU containing IMU data and ground truth trajectories based on visual inertial odometry (total distance of 18.53 km and total time of 5.65 h). Finally, the present algorithm is compared with CNN, LSTM, ResNet18 and ResNet50 networks in VOIMU dataset for experiments. The experimental results show that the RMSE values of RBCN-Net are reduced by 6.906, 2.726, 1.495 and 0.677, respectively, compared with the above networks, proving that the algorithm effectively improves the accuracy of pedestrian navigation.

AbstractGold, silver, platinum and palladium typically crystallize with the face-centred cubic structure. Here we report the high-yield solution synthesis of gold nanoribbons in the 4H hexagonal polytype, a previously unreported metastable phase of gold. These gold nanoribbons undergo a phase transition from the original 4H hexagonal to face-centred cubic structure on ligand exchange under ambient conditions. Using monochromated electron energy-loss spectroscopy, the strong infrared plasmon absorption of single 4H gold nanoribbons is observed. Furthermore, the 4H hexagonal phases of silver, palladium and platinum can be readily stabilized through direct epitaxial growth of these metals on the 4H gold nanoribbon surface. Our findings may open up new strategies for the crystal phase-controlled synthesis of advanced noble metal nanomaterials.