• Energy Research
• 7. Clean energy close
• 6. Clean water close
• 1. No poverty close
• CN close
• GB close
• DE close
• AU close

Ultrafast laser-annealing technique for the fabrication of large-grain perovskite films and efficient perovskite solar cells at room temperature.

The pyrolysis of waste disposable paper cups (WDPCs) was investigated using a thermogravimetric analyser coupled with a Fourier transform infrared spectrometer. The activation energies of the pyrolysis reactions were obtained by the Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) methods respectively. The kinetic model was determined by the master plots method. Thermogravimetric results showed that the highest weight loss rate occurred from 345 to 365 °C as the heating rate was increased from 10 to 30 °C min−1, indicating the pyrolysis of cellulosic material in the WDPC. The weight loss between 400 and 500 °C can be attributed to the decomposition of polyethylene. By analysing the FTIR spectra, it was found that the absorbance of all the evolved gaseous products had peaks at 360 °C due to the decomposition of cellulose fibres and the cracking of polyethylene at 485 °C led to the emergence of a second hydrocarbon peak. Ketones were the most abundant condensable organic products and CO2 was the dominating gaseous product, which can also be produced via secondary cracking of the small molecule organics above 400 °C. Kinetic analysis revealed that the average activation energy of the pyrolysis of the WDPC was 153.75 kJ mol−1 from the FWO method and 151.43 kJ mol−1 from the KAS method. The reaction mechanism can be described by the R3 model.

Microbial fuel cells (MFCs) can potentially be utilized for power generation, but their low power density and low energy storage capabilities remain major bottlenecks for their large-scale development. In this research, a simplistic nitrogen-doped hierarchically porous carbon material (HPC-A) was developed through a one-step carbonization and activation process and was successfully hot-pressed on the carbon cloth (CC) substrate. This process fabricates capacitive bioanodes (HPC-A-CC) that can enhance electricity generation and storage in MFCs. The as-prepared HPC-A-CC anode delivered a power density of 2043.6 mW·m-2 and a cumulative total charge (Qm) of 426.4 ± 13.4C·m-2 at each cycle, which was 2.1 and 34.8 times higher than that of the plain CC anode, respectively. This was a result of the hierarchical and interconnected porous structure, improved hydrophilic surface, and increased number of active centers which host the bacteria for enhanced electron transfer. Electrochemical measurements indicated the superior electrochemical activity and capacitive behavior of the HPC-A-CC anode. Furthermore, biofilm analysis revealed that the HPC-A-CC biofilm exhibited higher cell viability and a more uniform spatial distribution. These findings not only demonstrate the potential of HPC-A-CC for power enhancement in MFCs but also provide a feasible solution to the problem of power generation and demand mismatch in MFC applications.

Parabolic trough power plants are currently the most commercially applied systems for CSP power generation. To improve their cost-effectiveness, one focus of industry and research is the development of processes with other heat transfer fluids than the currently used synthetic oil. One option is the utilization of water/steam in the solar field, the so-called direct steam generation (DSG). Several previous studies promoted the economic potential of DSG technology [1–3]. Analyses’ results showed that live steam parameters of up to 500°C and 120 bars are most promising and could lead to a reduction of the levelized electricity cost (LEC) of about 11% [4]. However, all of these studies only considered plants without thermal energy storage (TES). Therefore, a system analysis including integrated TES was performed by Flagsol GmbH and DLR together with Solar Millennium AG, Schott CSP GmbH and Senior Bergho¨fer GmbH, all Germany. Two types of plants are analyzed and compared in detail: a power plant with synthetic oil and a DSG power plant. The design of the synthetic oil plant is very similar to the Spanish Andasol plants [5] and includes a molten salt two-tank storage system. The DSG plant has main steam parameters of 500 °C and 112 bars and uses phase change material (PCM) for the latent and molten salt for the sensible part of the TES system. To enable comparability, both plants share the same gross electric turbine capacity of 100 MWel, the same TES capacity of nine hours of full load equivalent and the same solar multiple of the collector field of about two. This paper describes and compares both plants’ design, performance and investment. Based on these results, the LEC are calculated and the DSG plant’s potential is evaluated. One key finding is that with currently proposed DSG storage costs, the LEC of a DSG plant could be higher than those of a synthetic oil plant. When considering a plant without TES on the other hand, the DSG system could reduce the LEC. This underlines the large influence of TES and the still needed effort in the development of a commercial storage system for DSG.

The industrial sector accounts for 17% of end-use energy in the UK, and 54% globally. Therefore, there is substantial scope for simulating and assessing potential energy retrofit options for industrial buildings. Building Energy Modelling (BEM) applied to industrial buildings poses a complex but important opportunity for reducing global energy demand, due to years of renovation and expansion. Large and complex industrial buildings make modelling existing geometry for BEM difficult and time consuming. This paper presents a potential solution for quickly capturing and processing as-built geometry of a factory to be utilized in BEM. Laser scans were captured from the interior of an industrial facility to produce a Point Cloud. The existing capabilities of a Point Cloud processing software were assessed to identify the potential development opportunities to automate the conversion of Point Clouds to building geometry for BEM applications. In conclusion, scope exists for increasing the speed of 3D geometry creation of an existing industrial building for application in BEM and subsequent thermal simulation.

To find an appropriate method for sulfate-rich wastewater containing ethanol and acetate with COD/sulfate ratio of 1, a UASB reactor was operated for more than 180 days. The influences of HRT (hydraulic retention time) and OLR (organic loading rate) on organics and sulfate removal, gas production, and electrons utilization were investigated. The sludge activity and microorganism composition were also determined. The results indicated that this system removed more than 80% of COD and 30% of sulfate with HRT above 6h and OLR below 12.3 gCOD/L d. Further HRT decrease caused volatile fatty acids accumulation and performance deterioration. Except at HRT of 2h, COD and electron flow were mostly utilized by methane-producing archaea (MPA), and methane yield remained in the range of 0.18-0.24 LCH4/gCOD. Methane was mainly generated by Methanosaeta concilii GP6 with acetate as substrate, whereas sulfate was mainly reduced by incomplete-oxidizing Desulfovibrio species with ethanol as substrate.

Abstract Knocking combustion for spark-ignition engine is related to auto-ignition of a portion of the unburned fuel-air mixture. In this investigation, the detailed chemical kinetic mechanism was engaged to numerically study the auto-ignition characteristics of hydrogen-enriched methane under engine-relevant conditions. Compared with the experimental data, the USC Mech 2.0 mechanism obtained the closest agreement, and it was adopted in the sensitivity analysis, the rate of production (ROP) analysis and the reaction pathway analysis. Results showed that at high temperature and high pressure, the ignition delay times (IDs) of CH4/H2 fuel blends reduce significantly (by two orders of magnitude at most) with rising hydrogen fraction, but the decline rate is not so obvious (within 37.3%) at low temperature. The sensitivity analysis indicated that at high temperature the reaction (R1) and reactions (R2, R3) promote each other while at low temperature only the reaction (R3) unilaterally facilitates the reaction (R12). The ROP analysis implied that the decrease of IDs of methane by hydrogen addition is realized through increasing the H, O, and OH radical production. Interestingly, the IDs for CH4/H2 fuel blends show different trends at different temperature, which decrease (by 47.5% at most) at low temperature but increase (by 132.7% at most) at high temperature as the equivalence ratio rises. The sensitivity analysis showed that the ignition kinetics for CH4/H2 fuel blends more depend on the CH4 concentration at low temperature but oxygen concentration at high temperature. This investigation not only supplements the fundamental combustion studies of CH4/H2 fuel blends in elevated pressures, but also reveals the influence mechanism of hydrogen addition and equivalence ratio on the IDs of CH4/H2 fuel blends at high pressure. More importantly, it may offer fundamental insights for the control of knocking combustion of spark-ignition (SI) engine.

Global fossil fuel reserves are declining due to differential uses, especially for power generation. Everybody can help to do their bit for the environment by using solar energy. Geographically, Bangladesh is a potential zone for harnessing solar energy. In March 2021, the renewable generation capacity in Bangladesh amounted to 722.592 MW, including 67.6% from solar, 31.84% from hydro, and 0.55% from other energy sources, including wind, biogas, and biomass, where 488.662 MW of power originated from over 6 million installed solar power systems. Concurrently, over 42% of rural people still suffer from a lack of electricity, where solar energy can play a vital role. This paper highlights the present status of various forms of solar energy progress in Bangladesh, such as solar parks, solar rooftops, solar irrigation, solar charging stations, solar home systems, solar-powered telecoms, solar street lights, and solar drinking water, which can be viable alternative sources of energy. This review will help decision-makers and investors realize Bangladesh’s up-to-date solar energy scenario and plan better for the development of a sustainable society.