• Energy Research
• Restricted close
• GB close
• EU close
• CN close

In this paper a novel generalised modelling framework for multi-energy systems containing storage elements is combined with a multi-objective model predictive control. The control objective is to both minimise the economic cost of importing energy into the system as well as providing the service of smoothing the profile of the electrical energy imported thus levelling the load and reducing peak demand. The capabilities of the approach are demonstrated by its application to a representative case study based on two buildings at the University of Manchester. Results show that model predictive control is capable of simultaneously addressing minimisation of economic cost as well as smoothing the electrical energy import.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

AbstractReview: 105 refs.

AbstractClimate change effects along with anthropogenic activities present the main factors that threaten the existence of heritage sites across the north Nile Delta of Egypt close to the coastline of the Mediterranean Sea. Observing the changes in the landscape close to the archaeological sites is an important issue for decision‐makers in terms of reducing the negative impact of natural events and human activities. The coastal heritage sites are becoming strongly threatened by the rising sea level phenomena that will happen due to global warming. Focusing on the distribution of the archaeological sites, this study aims to detect the areas at risk of shoreline erosion or accretion in the northern shoreline of the Nile Delta. In this study, the changes in the northern shoreline of the Nile Delta were observed and calculated during the last hundred years based on the integration between the old topographic maps from surveys in 1900, 1925 and 1945, optical satellite images captured by Landsat in 1972, 1986 and 2000; Sentinel2 2021; and the Radar SRTM data. The results of this study showed that the changes were enormous with a great shoreline erosion process over the last 121 years recorded along the shoreline in the periods between 1900–1925, 1925–1945, 1945–1972, 1972–1986, 1986–2000 and 2000–2021. The areas eroded were about 5.3, 4.7, 5.6, 8.9, 2.5 and 5.4 km2, respectively. Such negative movements caused the loss of two heritage sites, and the expected changes will lead to the loss of additional heritage sites in the next 500 years. Furthermore, a model was suggested for protecting the coastal heritage sites threatened by the risk of submergence. This study can help the decision‐makers to detect the coastal archaeological sites at risk and create innovative solutions for protecting these irreplaceable heritage sites.

Abstract In this paper, a medium-term load forecasting model is proposed, intended to be used for the extrapolation of loads containing a small proportion of air conditioners. The main feature of the proposed model is the decomposition of weekly load observations into two independent components: trend line and seasonal variations. The trend line is described by the combination of the polynomial regression and the first-order autoregressive model. The parameters of this model are estimated with the aid of the generalized least-squares method. The seasonal component is modeled via a discrete model, where the weather sensitive cycle is separated from the weather insensitive one. A linear regression model is further proposed in order to associate weather sensitive variations with the exogenous weather variable (temperature). This procedure enabled a simple and efficient convolution of all load components into a single forecasting model. The whole methodology is verified on a real-life example of the peak-load consumption within the power system of former Yugoslavia.

The development of heat transfer fluids (HTF) and heat storage materials (HSM) is crucial to design concentrating solar plant (CSP). Binary alkaline nitrate mixtures are currently used as sensible thermal energy storage materials. However, multi-component nitrate/nitrite systems were proposed as possible better candidates. In particular, ternaries mixtures containing sodium, potassium, and calcium are extremely promising as thermal fluids, given their reduced toxicity and greater cost-effectiveness. Nevertheless, very few data are present in the scientific literature regarding the correspondent phase diagram, and only the properties of specific compositions are reported. For this reason, a regular solution model was developed and employed in this work, and validated by comparing the simulation results with experimentally obtained phase change values. In particular, given that the common calorimetric techniques are impracticable for detecting the transition temperatures of calcium containing nitrate mixtur...

Abstract A Gas–Solid Vortex Reactor (GSVR), in literature also referred to as Rotating Fluidized Bed in Static Geometry (RFB-SG), is a promising reactor type for Process Intensification (PI) with respect to reactor volume reduction. Although replacing gravitational by centrifugal force has been considered since the seventies, the hydrodynamics of the reactor flow and the bed behavior remain largely unknown. In the present work experiments have been carried out in a cold flow GSVR with diameter of 0.54 m, length of 0.1 m and 36 inlet slots of 2 mm. Gas injection velocities of 55–111 m/s and particles with densities of 950–1800 kg/m 3 and diameters of 1–2 mm have been applied. Depending on solids density, particle diameter and gas injection velocity the bed behavior can be considered as stable, semi-stable or unstable. For semi-stable and stable flow regimes the effect of the above process conditions on the maximum solids capacity was investigated. With increasing solids density, the bed stability considerably decreases, while the maximum solids capacity increases. By increasing the gas injection velocity, both the bed stability and the maximum solids capacity increase. Once bed stability is accomplished, a further increase of the gas injection velocity does not affect the maximum solids capacity. With increasing particle diameter, the bed stability decreases while the maximum solids capacity increases.

Abstract Rigid ceramic filters have emerged as the most promising technology for cleaning of hot gases due to their resistance to attack by aggressive gases and high temperatures. Their potential may be further extended by using them in combination with injection of a dry sorbent to remove acid gases and other chemical contaminants. A crucial factor in their successful utilisation is the ability of the cleaning pulse to remove the deposited cake effectively from the filter surface. In this study, laboratory experiments have been carried out using a single ceramic candle filter. The non-steady-state behaviour of the filter in the initial period of filtration was followed. ‘Patchy’ cleaning of the filter was observed and is consequently identified as the major cause of the inefficiency of filter cleaning indicated by the measured residual pressure drops. A simple correlation has been proposed to determine the cleaned fraction from pressure differences as a measure of the efficiency of cleaning. The conditioning curves have been successfully simulated using a recently developed probabilistic model and it has been shown that the model can also be applied to simulate the experimental results obtained in a pilot plant operating at high temperatures. The modelling results are consistent with the experimental observation that patchy cleaning with a thin residual dust layer in the cleaned areas can explain the conditioning behaviour.