• Energy Research
• CN close
• IT close
• AU close
• Energies close

Based on the energy conversion equation and dynamic power model of the semi-transparent crystalline silicon photovoltaic (PV) window (ST-PVW), through an iterative coupling solution to the operating temperature of the cell, a thermal-electric coupling calculation method for the ST-PVW is provided, and, combined with experiments, the method model was verified. Based on this model, the influence of PV cell coverage rate (PVR) on the thermal performance of the ST-PVW was studied. According to the simulation results, in summer, the heat gain of the ST-PVW decreases with the increase of PVR, and in winter, the amount of heat loss increases with the increase of PVR. For the four cities of Guangzhou, Nanjing, Beijing and Harbin, when the PVR is 1, 0.60 to 0.64, 0.28 to 0.32 and 0.26 to 0.30, respectively, the annual power consumption of the air conditioner can reach the minimum, and when the PVR is 0.16 to 0.17, 0.24 to 0.25, 0.22 to 0.23 and 0.19 to 0.20, respectively, the amount of electricity generated can just offset the power consumption of the air conditioner during the day.

Fluidization of non-spherical particles is a common process in energy industries and chemical engineering. Understanding the fluidization of non-spherical particles is important to guide relevant processes. There already have been numerous studies which investigate the behaviors of different non-spherical particles during fluidization, but the investigations of the fluidization of polyhedral particles do not receive much attention. In this study, the investigation of the fluidization of polyhedral particles described by the polyhedron approach is conducted with a numerical CFD-DEM method. Experiments of the fluidization of three kinds of polyhedral particles are conducted under the same condition with corresponding simulations to validate the accuracy of our CFD-DEM model. The results indicate that our CFD-DEM model with the polyhedron approach can predict the behaviors of polyhedral particles with reasonable accuracy. Fluidization behaviors of different polyhedral particles are also investigated in this study. Compared to spherical particles, the motion of polyhedral particles is stronger, and mixing degree is higher under the same fluidization gas velocity.

This paper aims to reconsider prosumers’ role in the power markets in the early stages of their decentralization, accounting for rising self-supply trends, security threats, and economic and regulatory barriers. The development of prosumerism envisages finding the ratio between retail market sales under the feed-in tariff and the net billing mechanism. Within the methodology section, the indicator of prosumer efficiency for electricity generation (EUR/kWh) is proposed based on average consumption/production ratios and consumption/delivery incentives. To support household prosumers, the mentioned incentives on the renewable energy market consider the self-supply cost of electricity, the levelized cost of electricity for small-scale green energy facilities (solar photovoltaic and wind), and transaction costs. This paper evaluates prosumer efficiency under three consumption/production ratio scenarios for Ukrainian households (self-consumption of 40%, 20%, and 100% of green electricity annually generated by a household and selling the leftovers via the feed-in tariff) for 2023. The gradual movement from fixed tariffs for households toward market-based prices promotes the emergence of new related market players and their consolidation in the market. Participation in the organized power market segments is relevant for day-ahead market prices above 130 EUR/MWh, disregarding the households’ tariff rate. The low price caps inhibit the prosumer’s participation in the market, while the transition from the feed-in tariff to net billing significantly promotes their development only under high price caps.

This study focuses on the Wartsila 9L34DF engine and proposes an integrated system for low-temperature carbon capture using the coupling of cold and hot energy recovery with membrane separation in LNG-powered ships. By utilizing a series dual-pressure organic Rankine cycle (SDPORC) system to recover waste heat from the engine exhaust gases and generate electricity, the system provides power support for the low-temperature carbon capture compression process without consuming additional ship power. To validate the accuracy and reliability of the mathematical model, the simulation results are compared with the literature’s data. Once the model’s accuracy is ensured, the operational parameters of the integrated system are analyzed. Subsequently, working fluid optimization and genetic algorithm sensitive parameter optimization are conducted. Finally, under the optimal operating conditions, the thermodynamic performance and economic evaluation of the integrated system are assessed. The results demonstrate that the net power output of the integrated system is 100.95 kW, with an exergy efficiency of 45.19%. The unit carbon capture cost (UCC) is 14.24 $/ton, and for each unit of consumed LNG, 1.97 kg of liquid CO2 with a concentration of 99.5% can be captured. This integrated system significantly improves the energy utilization efficiency of ships and reduces CO2 emissions.

The built environment remains a strategic research and innovation domain in view of the goal of full decarbonization. The priority is the retrofitting of existing buildings as zero-emission to improve their energy efficiency with renewable energy technologies pulling the market with cost-effective strategies. From the first age of photovoltaics (PV) mainly integrated in solar roofs, we rapidly moved towards complete active building skins where all the architectural surfaces are photoactive (Building Integrated Photovoltaics - BIPV). This change of paradigm, where PV replaces a conventional building material, shifted the attention to relate construction choices with energy and cost effectiveness. However, systematic investigations which put into action a cross-disciplinary approach between construction, economic and energy related domains is still missing. This paper provides the detailed assessment of a real multifamily building, taking into account retrofit scenarios for making active the building skin, with the goal to identify the sensitive aspects of the energetic and economic effectiveness of BIPV design options. By assuming a real case study with monitored data, the analysis will consider a breakdown of the main individual parts composing the building envelope, by then combining alternative re-configurations in merged clusters with different energy and construction goals. Results will highlight the correlation between building skin construction strategies and the energy and cost parameters by identifying the cornerstones for enhancing efficiency. The outcomes, related to the total life cost, self-consumption/sufficiency, in combination with different building design options (façade, roof, balconies, surface orientations, etc.), provide a practical insight for researchers and professionals to identify renovation strategies by synergistically exploiting the solar active parts towards lower global costs and higher energy efficiency of the whole building system.

An important trend of Building Integrated Solar Thermal (BIST) system is to improve the aesthetic aspect of the solar collector to meet the requirement of architectural style and energy collection. Painting on the glass cover in an appropriate method is a simple and practical way. In this study, a halftone coating was used to print a red brick wall pattern on the glass cover. A series of comparative experiments were carried out to test the effect of the coating on the thermal behavior of the solar collector. In heat collection processes, compared with the solar collector with blank cover plate, the one with coated cover plate has lower absorber plate temperature and higher cover plate temperature. The lower the solar irradiance, the smaller the effect of color coating on the solar collector. Compared with the uncoated surface, the coated surface is more sensitive to solar irradiation. In the same heat collection process, compared with the solar collector coated on the outer surface of the cover plate, the one coated on the inner surface has 0.8 °C higher heat absorber plate temperature and 5% lower top heat loss.

Wind farms (WFs) controlled with conventional vector control (VC) algorithms cannot be directly integrated to the power grid through line commutated rectifier (LCR)-based high voltage direct current (HVDC) transmission due to the lack of voltage support at its sending-end bus. This paper proposes a novel coordinated control scheme for WFs with LCC-HVDC integration. The scheme comprises two key sub-control loops, referred to as the reactive power-based frequency (Q-f) control loop and the active power-based voltage (P-V) control loop, respectively. The Q-f control, applied to the voltage sources inverters in the WFs, maintains the system frequency and compensates the reactive power for the LCR of HVDC, whereas the P-V control, applied to the LCR, maintains the sending-end bus voltage and achieves the active power balance of the system. Phase-plane analysis and small-signal analysis are performed to evaluate the stability of the system and facilitate the controller parameter design. Simulations performed on PSCAD/EMTDC verify the proposed control scheme.