• Energy Research
• physical sciences close
• 7. Clean energy close
• US close
• CN close
• NL close

A range of optical fibre-based sensors for the measurement of ethanol, primarily in aqueous solution, have been developed and are reviewed here. The sensing approaches can be classified into four groups according to the measurement techniques used, namely absorption (or absorbance), external interferometric, internal fibre grating and plasmonic sensing. The sensors within these groupings can be compared in terms of their characteristic performance indicators, which include sensitivity, resolution and measurement range. Here, particular attention is paid to the potential application areas of these sensors as ethanol production is globally viewed as an important industrial activity. Potential industrial applications are highlighted in the context of the emergence of the internet of things (IoT), which is driving widespread utilization of these sensors in the commercially significant industrial and medical sectors. The review concludes with a summary of the current status and future prospects of optical fibre ethanol sensors for industrial use.

Abstract Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Additionally, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

Photosynthetic chromatophore vesicles found in some purple bacteria constitute one of the simplest light-harvesting systems in nature. The overall architecture of chromatophore vesicles and the structural integration of vesicle function remain poorly understood despite structural information being available on individual constituent proteins. An all-atom structural model for an entire chromatophore vesicle is presented, which improves upon earlier models by taking into account the stoichiometry of core and antenna complexes determined by the absorption spectrum of intact vesicles in Rhodobacter sphaeroides, as well as the well-established curvature-inducing properties of the dimeric core complex. The absorption spectrum of low-light-adapted vesicles is shown to correspond to a light-harvesting-complex 2 to reaction center ratio of 3:1. A structural model for a vesicle consistent with this stoichiometry is developed and used in the computation of excitonic properties. Considered also is the packing density of antenna and core complexes that is high enough for efficient energy transfer and low enough for quinone diffusion from reaction centers to cytochrome bc(1) complexes.

In this paper, recent achievements in the application of the lattice Boltzmann method (LBM) to complex fluid flows are reported. More specifically, we focus on flows through reactive porous media, such as the flow through the substrate of a selective catalytic reactor (SCR) for the reduction of gaseous pollutants in the automotive field; pulsed-flow analysis through heterogeneous catalyst architectures; and transport and electro-chemical phenomena in microbial fuel cells (MFC) for novel waste-to-energy applications. To the authors’ knowledge, this is the first known application of LBM modeling to the study of MFCs, which represents by itself a highly innovative and challenging research area. The results discussed here essentially confirm the capabilities of the LBM approach as a flexible and accurate computational tool for the simulation of complex multi-physics phenomena of scientific and technological interest, across physical scales.

This work investigates the optical performance of a textured back surface reflector (BSR) produced by a maskless solution-based wet chemical etch in Al $_\text{0.3}$ Ga $_\text{0.7}$ As for a 1.1- $\mu$ m-thick GaAs solar cell. Combining the maskless texture with the 94% reflective flat mirror resulted in a high haze in reflectance near 80% across the GaAs absorbing region. The increased diffuse reflectance from the maskless BSR provided a 19.7% increase in the integrated short-circuit current density from the base region of the 1.1- $\mu$ m GaAs solar cell with the maskless BSR compared to the simulated 1.1- $\mu$ m solar cell with no light trapping structures. Based on the principle concepts for the Fabry–Perot etalon, the lifetime enhancement factor (LEF), defined as the extended photon lifetime in an optical cavity due to light trapping, was derived for the BSR devices. The LEF for the maskless BSR device was measured to be 4.3 times greater than the single-pass photon lifetime, agreeing with the high haze in reflectance and improved photoabsorption near the GaAs band edge. This value agrees with the F factor in the analytical propagation model that fits the experimental external quantum efficiency curves and justifies using the LEF to quantitatively represent the optical performance of light trapping structures in sub- $\mu$ m thick solar cells.

Abstract Thin film CdTe superstrate solar cells have been fabricated by sputtering starting from CdS/CdSe front layers deposited on transparent conductor coated glass. The performance of such devices is sensitive to the fabrication details including the temperature-time profile, which leads to CdSe/CdTe interdiffusion and formation of a CdTe1-xSex bandgap-graded absorber. Mapping spectroscopic ellipsometry (M-SE) has been applied to the CdS and CdSe thin films for process calibration, which involves determining the deposition rate in terms of effective thickness (volume/area) versus spatial position on the sample. The goal is to optimize the performance of the devices by correlating cell parameters with these two effective thicknesses. Intended variations in the thicknesses along with unintended spatial non-uniformities enable coarse and fine-scale optimization, respectively. Using these methods, the highest performance solar cells from the CdS/CdSe/CdTe structure are obtained with 13 nm CdS and 100 nm CdSe. An increase in the CdS thickness above 13 nm leads to a decrease in open-circuit voltage and fill-factor attributed to the formation of a CdSe1-zSz interdiffusion region with z approaching 0.5, where the alloy electronic properties are likely to suffer. Our results demonstrate that M-SE, exploited in conjunction with deposition non-uniformities, serve as a viable approach for process optimization of complex solar cell structures.

Numerical simulations are performed within the time domain to investigate the dynamic behaviors of an SPAR-type FOWT under wave group conditions. Towards this goal, the OC3 Hywind SPAR-type FOWT is adopted, and a JONSWAP (Joint North Sea Wave Project)-based wave group is generated by the envelope amplitude approach. The FOWT motion under wave group conditions, as well as the aerodynamic, hydrodynamic, and mooring performances, is simulated by our established in-house code. The rotating blades are modelled by the blade element momentum theory. The wave-body interaction effect is calculated by the three-dimensional potential theory. The mooring dynamics are also taken into consideration. According to the numerical results, the SPAR buoy motions are slightly increased by the wave group, while the heave motion is significantly amplified. Both the aerodynamic performance and the mooring tension are also influenced by the wave group. Furthermore, the low-frequency resonant response could be more easily excited by the wave group.

AbstractReview: 50 refs.