• Energy Research
• 7. Clean energy close
• 8. Economic growth close
• 1. No poverty close
• CZ close
• UA close

It is important to reduce the amount of municipal waste deposited in landfills, Czech Republic, therefore, puts more emphasis on the recovery of mixed municipal waste, which oblige and EU regulations. Production of solid alternative fuel that is suitable also due to less consumption of fossil fuels, is one of the uses of mixed municipal waste (Waste to Energy). A relatively high proportion of glass in mixed municipal waste is a major problem in the production of solid alternative fuel. The glass contained in the solid alternative fuel can be the cause of formation incrusts on heat transfer surfaces in combustion plants. For all examined types of glass, it was found that the melting temperature of the muffle furnace was 750 ° C. When using the method (ISO 540) for determining the temperature of softening , melting and flow showed no effect of the amount of glass in the ash, but the melting point was significantly higher (around 1,200 °C).

Abstract An alkaline earth boro-aluminosilicate glass (Eagle XG), a soda-lime glass, and a light-weight polyethylene-terephthalate (PET) foil, used as typical substrates for photovoltaics, were treated by an energetic proton beam (3 MeV, dose 106–107 Gy) corresponding to approx. 30 years of operation at low Earth orbit. Properties of the irradiated substrates were characterized by atomic force microscopy, optical absorption, optical diffuse reflectance, Raman spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and terahertz (THz) spectroscopy. Minimal changes of optical and morphological properties are detected on the bare Eagle XG glass, whereas the bare PET foil exhibits pronounced increase in optical absorption, generation of photoluminescence, as well as mechanical bending. On the other hand, the identical substrates coated with Indium-tin-oxide (ITO), which is a typical material for transparent electrodes in photovoltaics, exhibit significantly higher resistance to the modifications by protons while ITO structural and electronic properties remain unchanged. The experimental results are discussed considering a potential application of these materials for missions in space.

This paper analyzes the effectiveness and efficiency of the normatives' controlling against the operational and strategic controlling. The general focus in studies and focus of the controlling experts is mostly on the operational controlling. For the analysis of the normatives' controlling in Bavarian SMEs a primary research data set is used. The survey was aimed on Bavarian SME's in the machine building sector. We employ regression models for the assessment of significance of the influencing factors, which are causing the negation of the normatives' controlling. We use monthly hours worked in the normatives' controlling, percentage acceptance of the normatives' controlling, used normatives' controlling instruments and the number of employees working in the controlling department as the influencing factors. The empirical evidence shows significant results affecting Bavarian SME's - Acceptance (monthly capacity of the head of controlling department) was identified as a significant variable on a statistically significant level with the estimated coefficient of 0.217 in relation to the Hours (monthly hours of work capacity) of normatives' controlling departments, and Instruments (number of instruments used) were proved to significantly influence the Employees (number of employees in controlling department) with the coefficient of 2.099. With the growing importance of the ability of an organization to publicly demonstrate its success in reaching objectives and specifically in its societal impacts, the importance of setting normatives and their control will project into higher demands on the work capacity of the controlling departments.

The assessment of greenhouse gases (GHGs) and air pollutants emitted to and removed from the atmosphere ranks high on international political and scientific agendas. Growing international concern and cooperation regarding the climate change problem have increased the need to consider the uncertainty in inventories of GHG emissions. The approaches to address uncertainty discussed in this special issue reflect attempts to improve national inventories, not only for their own sake but also from a wider, system analytic perspective. They seek to strengthen the usefulness of national emission inventories under a compliance and/or global monitoring and reporting framework. The papers in this special issue demonstrate the benefits of including inventory uncertainty in policy analyses. The issues raised by the authors and featured in their papers, along with the role that uncertainty analysis plays in many of their arguments, highlight the challenges and the importance of dealing with uncertainty. While the Intergovernmental Panel on Climate Change (IPCC) clearly stresses the value of conducting uncertainty analyses and offers guidance on executing them, the arguments made here in favor of performing these studies go well beyond any suggestions made by the IPCC to date. Improving and conducting uncertainty analyses are needed to develop a clear understanding and informed policy. Uncertainty matters and is key to many issues related to inventorying and reducing emissions. Considering uncertainty helps to avoid situations that can create a false sense of certainty or lead to invalid views of subsystems. Dealing proactively with uncertainty allows for the generation of useful knowledge that the international community should have to hand while strengthening the 2015 Paris Agreement, which had been agreed at the 21st Conference of the Parties to the United Nations Framework Convention on Climate Change (UNFCCC). However, considering uncertainty does not come free. Proper treatment of uncertainty is demanding because it forces us to take the step from “simple to complex” and to grasp a holistic system view. Only, thereafter, can we consider potential simplifications. That is, comprehensive treatment of uncertainty does not necessarily offer quick or easy solutions for policymakers. This special issue brings together 13 papers that resulted from the 2015 (4th) International Workshop on Uncertainty in Atmospheric Emissions, in Cracow, Poland. While they deal with many different aspects of the uncertainty in emission estimates, they are guided by the same principal question: “What GHGs shall be verified at what spatio-temporal scale to support conducive legislation at local and national scales, while ensuring effective governance at the global scale?” This question is at the heart of mitigation and adaptation. It requires an understanding of the entire system of GHG sources and sinks, their spatial characteristics and the temporal scales at which they react and interact, the uncertainty (accuracy and/or precision) with which fluxes can be measured, and last but not least, the consequences that follow from all of the aforementioned aspects, for policy actors to frame compliance and/or global monitoring and reporting agreements. This bigger system context serves as a reference for the papers in the special issue, irrespective of their spatio-temporal focus, and is used as a guide for the reader.

In this work we assess the pathways for environmental improvement by the coal utilization industry for power generation in Australia. In terms of resources, our findings show that coal is a long term resource of concern as coal reserves are likely to last for the next 500 years or more. However, our analysis indicates that evaporation losses of water in power generation will approach 1000 Gl (gigalitres) per year, equivalent to a consumption of half of the Australian residential population. As Australia is the second driest continent on earth, water consumption by power generators is a resource of immediate concern with regards to sustainability. We also show that coal will continue to play a major role in energy generation in Australia and, hence, there is a need to employ new technologies that can minimize environmental impacts. The major technologies to reduce impacts to air, water and soils are addressed. Of major interest, there is a major potential for developing sequestration processes in Australia, in particular by enhanced coal bed methane (ECBM) recovery at the Bowen Basin, South Sydney Basin and Gunnedah Basin. Having said that, CO2 capture technologies require further development to support any sequestration processes in order to comply with the Kyoto Protocol. Current power generation cycles are thermodynamic limited, with 35-40% efficiencies. To move to a high efficiency cycle, it is required to change technologies of which integrated gasification combined cycle plus fuel cell is the most promising, with efficiencies expected to reach 60-65%. However, risks of moving towards an unproven technology means that power generators are likely to continue to use pulverized fuel technologies, aiming at incremental efficiency improvements (business as usual). As a big picture pathway, power generators are likely to play an increasing role in regional development; in particular EcoParks and reclaiming saline water for treatment as pressures to access fresh water supplies will significantly increase.

With the increasing share of renewable power resources turbomachines need to be operated under a wider range of operating conditions including highly off-design regimes. Under such regimes an undesirable phenomenon of blade flutter might occur and possibly destroy the machine. To prevent this, intensive research is conducted by research teams worldwide. Blade flutter research program at the Institute of Thermomechanics of the Czech academy of sciences (IT CAS) mainly aims to advance experimental techniques for investigation of sonic and transonic blade flutter. For this purpose, the new sophisticated test facility was designed and manufactured. As part of the design process, the CFD computations were conducted in order to investigate the flow field in the test facility. This paper presents results of these computations with detailed analysis of flow structures occurring during the air flow through the stationary blade cascade.

Abstract Coal energy landscapes have changed dramatically over the last decades, including geographic shifts in production and consumption, technological changes that have reduced labour demand and led to relatively new mining practices (e.g. invasive mountain-top approaches), changed economic footprints, a shutdown of capacities or a complete end of mining in many regions with massive impacts on regional and local economies, community well-being, social capital, et cetera. Then the Covid-19 pandemic and Russia´s invasion of Ukraine have fundamentally affected the global economy, disrupted energy markets, and shattered existing estimates about development trends, challenging the progress and speed of the low-carbon energy transition and coal phase-out. This article provides a brief reflection on the changing landscapes of coal and their possible futures, and serves as an introduction to the Special Issue of Moravian Geographical Reports on “The death of coal in the energy transition? Regional perspectives”.

It is important for a modern consumer of thermal energy to know and be able to reduce the consumption of thermal energy, for which purpose an energy audit should be conducted. Today, three types of energy audit of residential buildings are used in Ukraine. The first one is development of the energy performance certificate of the building. The obtained energy performance certificate will give an idea of the level of thermal losses of the building and identify the main areas where measures to reduce the consumption of energy resources should be taken. The second method involves carrying out experimental studies to determine the class of air permeability of enclosing structures, which also makes it possible to assess the level of heat losses of the building and the condition of the ventilation system of the building. The third type of energy audit involves carrying out thermal imaging of the building envelope for the subsequent analysis of infrared images. A methodological approach has been developed for processing multiple infrared images. An energy inspection of a residential house has been conducted on the basis of which an energy performance certificate was compiled. The premises of the residential building have been tested for air permeability. Considering the main types of energy audit, its advantages and disadvantages have been determined both for the consumer and for the employees who conduct the audit.