• Energy Research
• engineering and technology close
• 13. Climate action close
• 8. Economic growth close
• CZ close

The problems of environmental pollution in the conditions of high dust content in the air during the development of coal mines in the territory of the Czech Republic are considered. A mechanism for making managerial decisions was developed using an integrated approach using the new technological process Nastup Tušimice (DNT) aimed at eliminating pollutant emissions and managing workers in dusty conditions in mining operations. The recommendations of active and passive measures aimed at reducing dustiness in the process of coal mining have also been developed.

It is important to reduce the amount of municipal waste deposited in landfills, Czech Republic, therefore, puts more emphasis on the recovery of mixed municipal waste, which oblige and EU regulations. Production of solid alternative fuel that is suitable also due to less consumption of fossil fuels, is one of the uses of mixed municipal waste (Waste to Energy). A relatively high proportion of glass in mixed municipal waste is a major problem in the production of solid alternative fuel. The glass contained in the solid alternative fuel can be the cause of formation incrusts on heat transfer surfaces in combustion plants. For all examined types of glass, it was found that the melting temperature of the muffle furnace was 750 ° C. When using the method (ISO 540) for determining the temperature of softening , melting and flow showed no effect of the amount of glass in the ash, but the melting point was significantly higher (around 1,200 °C).

Abstract An alkaline earth boro-aluminosilicate glass (Eagle XG), a soda-lime glass, and a light-weight polyethylene-terephthalate (PET) foil, used as typical substrates for photovoltaics, were treated by an energetic proton beam (3 MeV, dose 106–107 Gy) corresponding to approx. 30 years of operation at low Earth orbit. Properties of the irradiated substrates were characterized by atomic force microscopy, optical absorption, optical diffuse reflectance, Raman spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and terahertz (THz) spectroscopy. Minimal changes of optical and morphological properties are detected on the bare Eagle XG glass, whereas the bare PET foil exhibits pronounced increase in optical absorption, generation of photoluminescence, as well as mechanical bending. On the other hand, the identical substrates coated with Indium-tin-oxide (ITO), which is a typical material for transparent electrodes in photovoltaics, exhibit significantly higher resistance to the modifications by protons while ITO structural and electronic properties remain unchanged. The experimental results are discussed considering a potential application of these materials for missions in space.

In this work we assess the pathways for environmental improvement by the coal utilization industry for power generation in Australia. In terms of resources, our findings show that coal is a long term resource of concern as coal reserves are likely to last for the next 500 years or more. However, our analysis indicates that evaporation losses of water in power generation will approach 1000 Gl (gigalitres) per year, equivalent to a consumption of half of the Australian residential population. As Australia is the second driest continent on earth, water consumption by power generators is a resource of immediate concern with regards to sustainability. We also show that coal will continue to play a major role in energy generation in Australia and, hence, there is a need to employ new technologies that can minimize environmental impacts. The major technologies to reduce impacts to air, water and soils are addressed. Of major interest, there is a major potential for developing sequestration processes in Australia, in particular by enhanced coal bed methane (ECBM) recovery at the Bowen Basin, South Sydney Basin and Gunnedah Basin. Having said that, CO2 capture technologies require further development to support any sequestration processes in order to comply with the Kyoto Protocol. Current power generation cycles are thermodynamic limited, with 35-40% efficiencies. To move to a high efficiency cycle, it is required to change technologies of which integrated gasification combined cycle plus fuel cell is the most promising, with efficiencies expected to reach 60-65%. However, risks of moving towards an unproven technology means that power generators are likely to continue to use pulverized fuel technologies, aiming at incremental efficiency improvements (business as usual). As a big picture pathway, power generators are likely to play an increasing role in regional development; in particular EcoParks and reclaiming saline water for treatment as pressures to access fresh water supplies will significantly increase.

Abstract Coal energy landscapes have changed dramatically over the last decades, including geographic shifts in production and consumption, technological changes that have reduced labour demand and led to relatively new mining practices (e.g. invasive mountain-top approaches), changed economic footprints, a shutdown of capacities or a complete end of mining in many regions with massive impacts on regional and local economies, community well-being, social capital, et cetera. Then the Covid-19 pandemic and Russia´s invasion of Ukraine have fundamentally affected the global economy, disrupted energy markets, and shattered existing estimates about development trends, challenging the progress and speed of the low-carbon energy transition and coal phase-out. This article provides a brief reflection on the changing landscapes of coal and their possible futures, and serves as an introduction to the Special Issue of Moravian Geographical Reports on “The death of coal in the energy transition? Regional perspectives”.

The geography of Kazakhstan is characterized by a diverse landscape and a small population. Therefore, certain automobile roads pass through unpopulated mountain regions, where physical road diagnostics are rare or almost absent, while landscape factors continue to affect the road. However, modern geo-information approaches and remote sensing could effectively provide the road diagnostics necessary to make timely control decisions regarding a road’s design, construction, and maintenance. To justify this assumption, we researched the deformation of a mountain road near Almaty city. Open access satellite images of and meteorological archival data for the region were processed. The resulting data were compared to validate the road’s deformation triggers. Extreme weather conditions’ impacts could be identified via road destruction (nearly 40 m longitudinal cracks, 15 m short transversal cracks, and two crack networks along a 50 m road section). The remotely sensed parameters (vertical displacement velocity, slope exposure, dissections, topographic wetness index, aspect, solar radiation, SAVI, and snow melting) show the complexity of triggers of extensive road deformations. The article focuses only on open access data from remote sensing images and meteorological archives. All the resulting data are available and open for all interested parties to use.

The global energy demand is growing substantially. Clean and secure energy supply is a must for our civilization's sustainable development. Solar and wind energy is growing fast and can contribute significantly to meet the goals set by many countries to reduce greenhouse gas emissions. A deep and wide investigation of the environmental impact of solar and wind energy is important before any solar or wind plants' construction is made. In this study, the literature is reviewed to summarize the environmental impact of solar and wind energy systems in terms of the following factors; land use, water consumption, impact on biodiversity, visual and noise effects, health issues, and impact on micro climate. Although the benefits of solar and wind energy are obvious and great, negative perception of these technologies can inhibit their wide penetration in some regions. This review paper includes a critical and an inclusive analysis of solar and wind energy’s environmental impact and may serve as an important tool to conduct a proper environmental impact assessment. This critical analysis may serve also as a tool for developers, policy, and decision-when planning future solar and wind farms.

Medium and heavy-duty battery electric trucks (BETs) may play a key role in mitigating greenhouse gas (GHG) emissions from road freight transport. However, technological challenges such as limited range and cargo carrying capacity as well as the required charging time need to be efficiently addressed before the large-scale adoption of BETs. In this study, we apply a geospatial data analysis approach by using a battery electric vehicle potential (BEVPO) model with the datasets of road freight transport surveys for analyzing the potential of large-scale BET adoption in Finland and Switzerland for trucks with gross vehicle weight (GVW) of over 3.5 t. Our results show that trucks with payload capacities up to 30 t have the most potential for electrification by relying on the currently available battery and plug-in charging technology, with 93% (55% tkm) and 89% (84% tkm) trip coverage in Finland and Switzerland, respectively. Electric road systems (ERSs) would be essential for covering 51% trips (41% tkm) of heavy-duty trucks heavier than 30 t in Finland. Furthermore, range-extender technology could improve the trip electrification potential by 3–10 percentage points (4–12 percentage points of tkm).