• Energy Research
• 13. Climate action close
• 8. Economic growth close
• CZ close

The problems of environmental pollution in the conditions of high dust content in the air during the development of coal mines in the territory of the Czech Republic are considered. A mechanism for making managerial decisions was developed using an integrated approach using the new technological process Nastup Tušimice (DNT) aimed at eliminating pollutant emissions and managing workers in dusty conditions in mining operations. The recommendations of active and passive measures aimed at reducing dustiness in the process of coal mining have also been developed.

It is important to reduce the amount of municipal waste deposited in landfills, Czech Republic, therefore, puts more emphasis on the recovery of mixed municipal waste, which oblige and EU regulations. Production of solid alternative fuel that is suitable also due to less consumption of fossil fuels, is one of the uses of mixed municipal waste (Waste to Energy). A relatively high proportion of glass in mixed municipal waste is a major problem in the production of solid alternative fuel. The glass contained in the solid alternative fuel can be the cause of formation incrusts on heat transfer surfaces in combustion plants. For all examined types of glass, it was found that the melting temperature of the muffle furnace was 750 ° C. When using the method (ISO 540) for determining the temperature of softening , melting and flow showed no effect of the amount of glass in the ash, but the melting point was significantly higher (around 1,200 °C).

Abstract An alkaline earth boro-aluminosilicate glass (Eagle XG), a soda-lime glass, and a light-weight polyethylene-terephthalate (PET) foil, used as typical substrates for photovoltaics, were treated by an energetic proton beam (3 MeV, dose 106–107 Gy) corresponding to approx. 30 years of operation at low Earth orbit. Properties of the irradiated substrates were characterized by atomic force microscopy, optical absorption, optical diffuse reflectance, Raman spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and terahertz (THz) spectroscopy. Minimal changes of optical and morphological properties are detected on the bare Eagle XG glass, whereas the bare PET foil exhibits pronounced increase in optical absorption, generation of photoluminescence, as well as mechanical bending. On the other hand, the identical substrates coated with Indium-tin-oxide (ITO), which is a typical material for transparent electrodes in photovoltaics, exhibit significantly higher resistance to the modifications by protons while ITO structural and electronic properties remain unchanged. The experimental results are discussed considering a potential application of these materials for missions in space.

This paper analyzes the effectiveness and efficiency of the normatives' controlling against the operational and strategic controlling. The general focus in studies and focus of the controlling experts is mostly on the operational controlling. For the analysis of the normatives' controlling in Bavarian SMEs a primary research data set is used. The survey was aimed on Bavarian SME's in the machine building sector. We employ regression models for the assessment of significance of the influencing factors, which are causing the negation of the normatives' controlling. We use monthly hours worked in the normatives' controlling, percentage acceptance of the normatives' controlling, used normatives' controlling instruments and the number of employees working in the controlling department as the influencing factors. The empirical evidence shows significant results affecting Bavarian SME's - Acceptance (monthly capacity of the head of controlling department) was identified as a significant variable on a statistically significant level with the estimated coefficient of 0.217 in relation to the Hours (monthly hours of work capacity) of normatives' controlling departments, and Instruments (number of instruments used) were proved to significantly influence the Employees (number of employees in controlling department) with the coefficient of 2.099. With the growing importance of the ability of an organization to publicly demonstrate its success in reaching objectives and specifically in its societal impacts, the importance of setting normatives and their control will project into higher demands on the work capacity of the controlling departments.

The presented EC FP6 Project CECILIA is studying climate change impacts in Central and Eastern Europe based on the dynamical downscaling, i.e., nesting of a fine scale limited area model (or Regional Climate Model, RCM) within the Global Climate Models (GCMs). Global Climate Models (GCMs) can reproduce climate features on large scales, but their accuracy decreases when proceeding from continental to regional and local scales because of the lack of resolution. This is especially true for surface fields, such as precipitation, surface air temperature and their extremes, which are critically affected by topography and land use. However, in many applications, particularly related to the assessment of climate change impacts, the information on surface climate change at regional to local scale is fundamental. In the region of Central and Eastern Europe the need for high resolution studies is particularly important. A resolution sufficient to capture the effects of these topographical and associated land-use features is necessary. Therefore, 10 km resolution has been introduced in the presented project CECILIA for regional climate modelling in targeted areas of Central and Eastern Europe to provide satisfactory resolution in local impact studies covering key sectors of the region like hydrology, water quality, and water management, air quality issues, agriculture and forestry.

Forest ecosystems in Europe undergo cyclic fluctuations with alternating periods of forest prosperity and disturbances. Forest disturbances are caused by large-scale calamities (climate-induced and unforeseen events) resulting in an increased volume of salvage logging. In recent decades, climate change (warming, long-term droughts, more frequent storms, bark beetle outbreaks) has contributed to an increased frequency of salvage logging. However, until now, it has not been revealed what triggers national-scale forest calamities. All of the above-mentioned natural disturbances are connected to solar activity, which is the driver of climate change. This research relates the total volume of harvested timber and salvage logging to the climate and cosmic factors in the Czech Republic, Central Europe. Data of total and salvage logging are compared with air temperatures, precipitation, extreme climatic events, sunspot areas, and cosmic ray intensities. The results document a significant effect of average annual temperatures on the total and salvage logging for the entire period of observations since 1961. A significant correlation of salvage logging to the sunspot area and cosmic ray intensity was observed. The link between salvage logging and sunspots and cosmic ray intensity is supported by spectral analysis in which a significant 11-year cycle was observed since 1973. The results also show an increasing significant effect of sunspots and cosmic ray intensity on logging in recent years in connection with synergism of extreme climate events and the subsequent bark beetle outbreaks. Space and cosmic effects are factors that substantially influence forest ecosystems. Therefore, this paper provides new knowledge about, and possible predictions of, the forest response under climate change.

In this work we assess the pathways for environmental improvement by the coal utilization industry for power generation in Australia. In terms of resources, our findings show that coal is a long term resource of concern as coal reserves are likely to last for the next 500 years or more. However, our analysis indicates that evaporation losses of water in power generation will approach 1000 Gl (gigalitres) per year, equivalent to a consumption of half of the Australian residential population. As Australia is the second driest continent on earth, water consumption by power generators is a resource of immediate concern with regards to sustainability. We also show that coal will continue to play a major role in energy generation in Australia and, hence, there is a need to employ new technologies that can minimize environmental impacts. The major technologies to reduce impacts to air, water and soils are addressed. Of major interest, there is a major potential for developing sequestration processes in Australia, in particular by enhanced coal bed methane (ECBM) recovery at the Bowen Basin, South Sydney Basin and Gunnedah Basin. Having said that, CO2 capture technologies require further development to support any sequestration processes in order to comply with the Kyoto Protocol. Current power generation cycles are thermodynamic limited, with 35-40% efficiencies. To move to a high efficiency cycle, it is required to change technologies of which integrated gasification combined cycle plus fuel cell is the most promising, with efficiencies expected to reach 60-65%. However, risks of moving towards an unproven technology means that power generators are likely to continue to use pulverized fuel technologies, aiming at incremental efficiency improvements (business as usual). As a big picture pathway, power generators are likely to play an increasing role in regional development; in particular EcoParks and reclaiming saline water for treatment as pressures to access fresh water supplies will significantly increase.

Abstract Coal energy landscapes have changed dramatically over the last decades, including geographic shifts in production and consumption, technological changes that have reduced labour demand and led to relatively new mining practices (e.g. invasive mountain-top approaches), changed economic footprints, a shutdown of capacities or a complete end of mining in many regions with massive impacts on regional and local economies, community well-being, social capital, et cetera. Then the Covid-19 pandemic and Russia´s invasion of Ukraine have fundamentally affected the global economy, disrupted energy markets, and shattered existing estimates about development trends, challenging the progress and speed of the low-carbon energy transition and coal phase-out. This article provides a brief reflection on the changing landscapes of coal and their possible futures, and serves as an introduction to the Special Issue of Moravian Geographical Reports on “The death of coal in the energy transition? Regional perspectives”.