• Energy Research
• Embargo close
• 13. Climate action close
• 6. Clean water close
• 15. Life on land close
• DE close
• CN close

Abstract Microgrids integrating local renewable energy sources at low-voltage level show promising potentials in realizing a reliable, efficient, and clean supply of electricity. Further improvements are expected when such a microgrid is operated based on direct current (dc) instead of alternating current (ac) infrastructure for power distribution commonly in use today. Our study aims to systemically quantify the gap between environmental impacts of microgrids at building level using the case study of power distribution within office buildings. For this purpose, a scalable comparative life cycle assessment (LCA) is conducted based on a technical bottom-up analysis of differences between ac and dc microgrids. Particularly, our approach combines the micro-level assessment of required power electronic components with the macro-level requirements for daily operation derived from a generic grid model. The results indicate that the environmental impacts of employed power electronics are substantially reduced by operating a microgrid based on dc power distribution infrastructure. Our sensitivity analyses show that efficient dc microgrids particularly lead to savings in climate change impact emissions. In addition, our study shows that the state-of-the-art scaling rules of power electronics currently used in LCAs leads to inaccurate results. In contrast, the proposed methodology applies a more technical approach, which enables a detailed analysis of the environmental impacts of power electronic components at system level. Thus, it provides the foundation for an evaluation criterion for a comprehensive assessment of technological changes within the framework of energy policy objectives.

Abstract Public participation is often part of planning and decision-making processes relating to the German energy transformation (Energiewende). Factors influencing the active involvement of individuals have not been fully investigated, although these factors may impact the outcome of participatory decision making. However, a few concepts are discussed relating to what kind of people participate in governance processes: political efficacy, place attachment, value orientation, and sociodemographic characteristics. We further assumed that the aspects of attitudes toward renewable energy technologies, general knowledge about environment and energy, specific knowledge about electricity-generating technologies, personality strength, and living situation might influence people's participation in planning and decision making related to energy issues. In this study, we examine the relevance of these concepts based on a survey for which (n=) 2400 respondents were recruited from an access panel to build up a quota sample on the three crossed characteristics: gender, age, and school education. Many of the respondents are aware of participation options but very few become actively engaged in participation processes. The multivariate analyses conducted showed that attitudes towards renewable energy technologies, value orientation towards nature, political efficacy, personality strength, and individuals' specific knowledge have a strong influence on whether someone becomes actively involved or not.

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

Climate change will bring warmer and wetter conditions and more frequent extreme events in the Nemoral climate zone. These changes are expected to affect maize growth and yields. In this study, we applied the AgroC model to assess climate change impact on changes in growing environmental conditions, growing season length, yield and potential yield losses due to multiple abiotic stresses. The model was calibrated and validated using data from dedicated field experiments conducted in Lithuania during four meteorologically contrasting years (2015, 2016, 2017 and 2019). We simulated the climate impacts on rainfed maize for long-term future climate conditions from 2020 to 2100 under the RCP2.6 (low), RCP4.5 (medium) and RCP8.5 (high) emission scenarios. As a result, we found that air temperature, sum of growing degree days and amount of precipitation during the growing season of maize will increase, especially under medium and higher emission scenarios (RCP4.5 and RCP8.5), with significantly positive effect on yields. The simulation results showed that average maize grain yield will increase under RCP2.6 by 69 kg ha-1 per decade, under RCP4.5 by 197 kg ha-1 per decade and under RCP8.5 by 304 kg ha-1 per decade. The future potential maize yield reveals a progressive increase with a surplus of +10.2% under RCP4.5 and +14.4% under RCP8.5, while under RCP2.6 the increase of potential yield during the same period will be statistically not significant. The yield gap under RCP2.6 and RCP4.5 will fluctuate within a rather narrow range and under RCP8.5, it will decrease.

Abstract Bioeconomy is deemed to be an ambiguous term with multiple facets: new products from biomass, circular and cascading resource systems, developments of new and more resilient plants, or synthetic biology for molecular biotechnology, to name a few. Accordingly, the term is interpreted just as diversely by involved stakeholders and the broader public. To enable a clear and constructive dialog on bioeconomy strategies with and among society requires a profound understanding of these perceptions. Addressing this issue, a representative survey was conducted among the German population in order to scrutinize the general public's understanding of the term bioeconomy, citizens’ knowledge, fears, and expectations, as well as factors explaining their attitudes toward the bioeconomy. Our results indicate that, so far, German citizens are not very familiar with the concept. Its underlying ideas, however, are vastly appreciated. Support for a sustainable bioeconomy is thus strong and connected to high expectations in terms of environmental and economic benefits, which needs to be taken into account both in the implementation and communication of bioeconomy strategies. Support for the bioeconomy is furthermore connected to beliefs that reflect environmental concern and to pro-environmental behavior. While most measures and principles related to the bioeconomy (e.g., the use of biogas, biofuels, renewable materials for everyday products or buildings, or the cascading and circular use of resources) are strongly appreciated, the use of genetic engineering, for example, is opposed, mainly with regard to its applications in agriculture and industry, to a lesser extent in medicine.

Abstract The framework of this study is to weight 8 selected determinants and rank energy alternatives for hydrogen investments. For this purpose, different criteria that are based on two dimensions are identified with supported literature and interval type-2 (IT2) fuzzy decision-making trial and evaluation laboratory (DEMATEL) with alpha cuts is considered to measure the significant criteria. Additionally, renewable and non-renewable energy alternatives are ranked regarding the appropriateness for hydrogen energy investments with the help of IT2 fuzzy technique for order preference by similarity to ideal solution (TOPSIS) and IT2 fuzzy Vlse Kriterijumska Optimizacija Kompromisno Resenje (VIKOR) with alpha cuts. It is concluded that the weights of the criteria are quite similar for different alpha cuts. Also, ranking results of different energy alternatives are almost the same for both IT2 fuzzy TOPSIS and IT2 fuzzy VIKOR. Thus, it can be concluded that the analysis results are reliable and coherent. The principal results indicate that cost-efficiency and reserve adequacy play a key role in hydrogen investments since they have the highest weight (0.129). Moreover, it is also found that technological capacity also plays a critical role in this regard with the weight of 0.127. However, legal regulation has the lowest importance weight (0.121) in comparison with other factors. Additionally, the weights of personnel competency (criterion 3) and storage (criterion 4) are also low (0.122). The major conclusion show that renewable energy alternatives are more suitable to generate hydrogen energy in comparison with non-renewable ones. Within this context, it is identified that solar and geothermal energies are more appropriate alternatives for hydrogen production whereas coal and nuclear are on the last rank. Hence, the main strategy should be lowering the costs by following up-to-date technological developments. Another important issue is that it becomes more logical to produce hydrogen in renewable energy sources that will not be consumed forever so that sustainable production of the hydrogen can be provided.

A mesocosm approach was used to investigate the effects of ocean acidification (OA) on a natural plankton community in coastal waters off Norway by manipulating CO2 partial pressure (pCO2). Eight enclosures were deployed in the Raunefjord near Bergen. Treatment levels were ambient (~320 µatm) and elevated pCO2 (~2000 µatm), each in 4 replicate enclosures. The experiment lasted for 53 d in May-June 2015. To assess impacts of OA on the plankton community, phytoplankton and protozooplankton biomass and total seston fatty acid content were analyzed. In both treatments, the plankton community was dominated by the dinoflagellate Ceratium longipes. In the elevated pCO2 treatment, however, biomass of this species as well as that of other dinoflagellates was strongly negatively affected. At the end of the experiment, total dinoflagellate biomass was 4-fold higher in the control group than under elevated pCO2 conditions. In a size comparison of C. longipes, cell size in the high pCO2 treatment was significantly larger. The ratio of polyunsaturated fatty acids to saturated fatty acids of seston decreased at high pCO2. In particular, the concentration of docosahexaenoic acid (C 22:6n3c), essential for development and reproduction of metazoans, was less than half at high pCO2 compared to ambient pCO2. Thus, elevated pCO2 led to a deterioration in the quality and quantity of food in a natural plankton community, with potential consequences for the transfer of matter and energy to higher trophic levels

Abstract As part of a comprehensive evaluation of the use of Sida hermaphrodita (hereafter referred to as Sida) biomass as a solid biofuel, a life cycle assessment (LCA) according to ISO 14040/14044 was carried out by means of a suitable cradle-to-gate system design. The supply and use of chips, pellets and briquettes was studied by internal and external comparisons to show competitiveness and improvement options. The results show fewer differences within the Sida process chain designs but larger distinctions to compared alternative biofuels such as wood or Miscanthus pellets. A major finding is that Sida process chains cause lower environmental impacts in comparison with alternative biofuels. The study identified hot spots within the Sida process chains and starting points for further improvement. A sensitivity analysis of important parameters, such as specific yield or heating values was performed. Because there are no similar investigations on the environmental impact of Sida used as a biogenic solid fuel to date this manuscript presents first results. So far, the results indicate that Sida provides a more sustainable option for the use of biomass in combustion processes in relation to environmental impacts.