• Energy Research
• 7. Clean energy close
• 15. Life on land close
• DE close
• FR close
• CD close

Demand-Side Management systems aim to modulate energy consumption at the customer side of the meter using price incentives. Current incentive schemes allow consumers to reduce their costs, and from the point of view of the supplier play a role in load balancing, but do not lead to optimal demand patterns. In the context of charging fleets of electric vehicles, we propose a centralised method for setting overnight charging schedules. This method uses evolutionary algorithms to automatically search for optimal plans, representing both the charging schedule and the energy drawn from the grid at each time-step. In successive experiments, we optimise for increased state of charge, reduced peak demand, and reduced consumer costs. In simulations, the centralised method achieves improvements in performance relative to simple models of non-centralised consumer behaviour.

Abstract Hybrid energy storage is a multi-modal approach to store and supply different forms of energy (electricity, heat, cold) simultaneously. This is an important sector coupling approach and enables large scale flexibility for a deep decarbonization of energy systems. Two different proposed energy storages – power-to-heat-to-X energy storage (PHXES) and pumped thermal energy storage (PTES) – are investigated in detail in this work towards their potential towards a hybrid deployment. The techno-economic analysis includes thermodynamic flowsheet simulations and unified cost estimations based on the used equipment. It is shown that the main input data set (e.g. working fluid selection, turbomachinery efficiency, pinch temperatures) has a strong influence on storage roundtrip efficiency in the thermodynamic simulations, but also on storage costs. Cost decrease and performance increase can be conflicting development targets, and it is not clear if future energy systems rather require technologies with the highest storage efficiencies or if low cost is an important prerequisite. PHXES and three variants of PTES are implemented into a simplified energy system model of the city of Hamburg that comprises the electric load and heat demand of the district heating system. Two scenarios (fossil benchmark and 80% decarbonization) are used to select the technologies and their capacities that allow the most cost-effective energy supply solution by a linear-programming optimization procedure. Large scale renewable power generation and hybrid energy storage play the major roles in the decarbonization scenario. PHXES with a storage capacity of 69 GWh, hot water storage (3.6 GWh) and a battery system (430 MWh) are part of the cost-optimal solution. A cost sensitivity analysis shows that a total cost reduction of 60–80% is required for PTES to become competitive in this model scenario.

Two stage premixed combustor with variable geometry has been developed to meet stringent NOx goals in Japan without the use of water or steam injection. This combustion system is planned to be applied for 120-MW gas turbine in 1090-MW LNG combined cycle plant. The full-pressure, full-scale combustion tests were conducted over a wide range of operating conditions for this gas turbine. The combustion tests proved that NOx levels as well as mechanical characteristics were well within the goals.

Vegetation surveys were carried out in four different study areas in the Sakha Republic, Russia: in the mountainous region of the Verkhoyansk Range within the Oymyakonsky and Tomponsky District (Event EN21-201 - EN21-219), and in three lowland regions of Central Yakutia within the Churapchinsky, Tattinsky and the Megino-Kangalassky District (Event EN21220 - EN21264). The study area is located within the boreal forest biome that is underlain by permafrost soils. The aim was to record the projective ground vegetation in different boreal forest types studied during the RU-Land_2021_Yakutia summer field campaign in August and September 2021.Ground vegetation was surveyed for different vegetation types within a circular forest plot of 15m radius. Depending on the heterogeneity of the forest plot, multiple vegetation types (VA, VB, or VC) were chosen for the survey. The assignment of a vegetation type is always unique to a site. Their cover on the circular forest plot was recorded in percent.In total, 84 vegetation types at 58 forest plots were assessed. All data were collected by scientists form the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research (AWI) Germany, the University of Potsdam Germany, and the North-Easter Federal University of Yakutsk (NEFU) Russia.

From its inception, the Nuclear Energy Agency (NEA), which is part of the broader Organisation for Economic Co-operation and Development, has contributed to the development of international radiological protection norms and standards. This continues today, in the form of studies and workshops to assist radiological protection policy makers, regulators and practitioners to develop concepts and approaches to help the international system of radiological protection, as recommended by the International Commission on Radiological Protection (ICRP), to evolve to better serve societal needs. The NEA's Committee on Radiation Protection and Public Health (CRPPH), in providing this support, has collaborated closely with the ICRP and strongly supports the current ICRP recommendation development process. In particular, active dialogue with a broad range of stakeholders is contributing to the evolution of concepts towards consensus on new ICRP recommendations. The CRPPH, as a body of ICRP recommendation practitioners, feels that the public, workers and the environment are well protected by the current radiological protection system, but agrees that a new consolidation and clarification of ICRP recommendations would be of value. The intent of the CRPPH in collaborating with ICRP is to develop a system of radiological protection that is simplified, more coherent, firmly based upon science and more clearly presented than the current system. This paper summarises the more detailed views of the CRPPH on the evolution of the system of radiological protection.

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

AbstractAlthough the road-map of the oxy-fuel process seems to be very advanced, there are still plenty of open questions. One of the significant ones is the corrosive behaviour of the heat exchanger surfaces. The Institute of Combustion and Power Plant Technology, University of Stuttgart, performs research on the fireside corrosion under oxy-fuel and conventional combustion conditions for the current and supercritical power plants considering the influence of combustion modus, gas atmosphere and fly ash deposits on the waterwall and superheater surfaces. Since the oxy-fuel-combustion atmosphere is composed of recirculated flue gases and pure oxygen, significantly higher concentrations of CO2, SO2 and H2O are present compared to the conventional combustion of coal with air as an oxidizer. In the here presented study the influence of an oxy-fuel combustion of a hard-coal on the surface of selected superheater materials is discussed and compared to the results obtained for lignite. Especially the interactions between the flue gas atmosphere, ash deposits and heat exchanger materials are studied in detail. The investigation encompassed in this paper has been focused on impacts of oxide-scale growth, carbon enrichment of the materials and sulphur-induced corrosion.Increased sulphur-induced corrosion has been observed in samples exposed to the oxy-combustion atmosphere. The noticed higher depth of corrosive attack of the oxy-fuel samples might be explained by a higher partial pressure of SO2 which is characteristic for oxy-fuel process. Moreover in certain cases the sulphur might be released by the deposits. Beside that, the oxy-fuel samples were exposed to much higher partial pressures of carbon dioxide comparing to the air-case leading apparently to rapid and massive internal carbon enrichment in the oxide scale. Moreover dependence between the chromium content and oxidation ability of the austenitic materials surfaces was noticed under oxy-fuel conditions.

Cette modélisation présente la partie de contrôle d'une pile à combustible à membrane d'échange de protons (PEMFC). L'objectif du modèle de représenter la chaîne de contrôle de la tension de la PEMFC. Ce modèle est basé sur une représentation macroscopique énergétique (REM) de la pile à combustible, puis conduit à une structure dite de contrôle maximal (SCM). La SCM est une inversion étape par étape de la REM (structure de contrôle basée sur un modèle d'inversion). Le processus de conception de la commande est basé sur une définition explicite du problème. Par exemple, les entrées de réglage, les objectifs du système ou les contraintes sont mises en évidence pour organiser la commande. De plus, le SMC montre les endroits où les capteurs sont nécessaires et où les contrôleurs sont requis. Malheureusement, le SCM n'est qu'une structure de contrôle théorique. Par conséquent, une structure réaliste nécessite certaines simplifications, ce qui conduit à une structure de contrôle dite pratique. This modeling presents the control part of a proton exchange membrane fuel cell (PEMFC). The objective of the model is to represent the voltage control chain of the PEMFC. This model is based on an energetic macroscopic representation (EMR) of the fuel cell and then leads to a so-called maximum control structure (MCS). The SCM is a step-by-step inversion of the REM (control structure based on an inversion model). The control design process is based on an explicit problem definition. For example, control inputs, system objectives, or constraints are highlighted to organize the control. In addition, the MSC shows where sensors are needed and where controllers are required. Unfortunately, the SCM is only a theoretical control structure. Therefore, a realistic structure requires some simplifications, which leads to a so-called practical control structure. AdditionnalInformation: Modèle créé lors d'une thèse en génie électrique, par Loïc Boulon (ses recherches portent sur la modélisation et le contrôle des véhicules électriques hybrides, des sources d'énergie et d'énergie et de puissance, et des systèmes de piles à combustible). Il a travaillé en vue de l'obtention du diplôme de doctorat à l'Université de Franche-Comté, Belfort, France, où sa thèse de doctorat a été réalisée en collaboration avec le FEMTO-ST, Belfort, et les Laboratoires L2EP, Lille. Co-encadrement par Daniel Hissel (PU au laboratoire FEMTO-ST), Alain Bouscayrol (PU au laboratoire L2EP) et Marie-Célie Péra (PU au laboratoire FEMTO-ST) AdditionnalInformation: Model created during a thesis in electrical engineering, by Loïc Boulon (his research focuses on the modeling and control of hybrid electric vehicles, energy and power sources, and fuel cell systems). He worked towards his Ph.D. degree at the University of Franche-Comté, Belfort, France, where his dissertation was complet in collaboration with the FEMTO-ST, Belfort, and the L2EP Laboratories, Lille. Co-supervision by Daniel Hissel (PU at FEMTO-ST laboratory), Alain Bouscayrol (PU at L2EP laboratory) and Marie-Célie Péra (PU at FEMTO-ST laboratory) Données computationnelles ou de simulation: - Langage de programmation : Langage Matlab - Plate-forme/OS : Microsoft Windows, Mac OS, Linux,... - Version : MATLAB R2018a - Statut de développement : Actif Simulation or computational data: - Programming language: Matlab language - Platform/OS: Microsoft Windows, Mac OS, Linux,... - Version: MATLAB R2018a - Development status: Active Project: Thèse de doctorat en génie électrique - Loïc Boulon, Contrat doctoral (Region Bourgogne Franche-Comté) Label: PHE (Plateforme Hydrogène-Energie) Audience: Research

Abstract. An improved understanding of present-day climate variability and change relies on high-quality data sets from the past 2 millennia. Global efforts to model regional climate modes are in the process of being validated against, and integrated with, records of past vegetation change. For South America, however, the full potential of vegetation records for evaluating and improving climate models has hitherto not been sufficiently acknowledged due to an absence of information on the spatial and temporal coverage of study sites. This paper therefore serves as a guide to high-quality pollen records that capture environmental variability during the last 2 millennia. We identify 60 vegetation (pollen) records from across South America which satisfy geochronological requirements set out for climate modelling, and we discuss their sensitivity to the spatial signature of climate modes throughout the continent. Diverse patterns of vegetation response to climate change are observed, with more similar patterns of change in the lowlands and varying intensity and direction of responses in the highlands. Pollen records display local-scale responses to climate modes; thus, it is necessary to understand how vegetation–climate interactions might diverge under variable settings. We provide a qualitative translation from pollen metrics to climate variables. Additionally, pollen is an excellent indicator of human impact through time. We discuss evidence for human land use in pollen records and provide an overview considered useful for archaeological hypothesis testing and important in distinguishing natural from anthropogenically driven vegetation change. We stress the need for the palynological community to be more familiar with climate variability patterns to correctly attribute the potential causes of observed vegetation dynamics. This manuscript forms part of the wider LOng-Term multi-proxy climate REconstructions and Dynamics in South America – 2k initiative that provides the ideal framework for the integration of the various palaeoclimatic subdisciplines and palaeo-science, thereby jump-starting and fostering multidisciplinary research into environmental change on centennial and millennial timescales.