• Energy Research
• 2016-2025close
• Closed Access close
• Restricted close
• DE close
• GB close

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

There is a widely believed myth that replacing the use of fossil fuels largely by renewable forms of energy is, with a possible exception of nuclear power, critically dependent on the development of appropriate new technologies. Accordingly, it is held that decarbonizing straight away is particularly difficult and expensive. There was a time when this idea had an element of reality, but this is no longer the case. Unfortunately, belief in this myth is shared by those in positions of influence. This paper serves to document that this presumed reality no longer holds, although the misconception may have been based on fact in the past. Whilst the survey of the available technology offered concentrates on electricity supply, it also documents that manufacture of synthetic fuels via hydrogen obtained by electrolysis of water and CO2 integrates smoothly with electricity grid stabilization as well as reducing the CO2 content of the atmosphere. The likely price and cost development in the energy market is also reviewed. In addition the role of CCS, in practice mainly capture from the air and industrial processes other than power generation is reviewed against the background of the cost effective generation of electricity by harvesting renewable forms of energy.

In the heating sector, borehole heat exchangers have become popular for supplying renewable energy. They tap into the subsurface to extract geothermal energy for heating purposes. For advanced applications, borehole heat exchangers require insulation in the upper part of the borehole either to meet legal requirements or to improve their performance. A priori numerical heat transport models of the subsurface are imperative for the systems’ planning and design. Only fully discretized models can account for depth-dependent borehole properties like insulated sections, but the model setup is cumbersome and the simulations come at high computational cost. Hence, these models are often not suitable for the simulation of larger installations. This study presents an analytical solution for the simulation of the thermal interactions of partly insulated borehole heat exchangers. A benchmark with a fully discretized OpenGeoSys model confirms sufficient accuracy of the analytical solution. In an application example, the functionality of the tool is demonstrated by finding the ideal length of a borehole insulation using mathematical optimization and by quantifying the effect of the insulation on the borehole heat exchanger performance. The presented method allows for accommodation of future advancements in borehole heat exchangers in numerical simulations at comparatively low computational cost.

Energy management is an enabling technique to guarantee the reliability and economy of hybrid electric systems. This paper proposes a novel machine learning-based energy management strategy for a hybrid electric bus (HEB), with an emphasized consciousness of both thermal safety and degradation of the onboard lithium-ion battery (LIB) system. Firstly, the deep deterministic policy gradient (DDPG) algorithm is combined with an expert-assistance system, for the first time, to enhance the “cold start” performance and optimize the power allocation of HEB. Secondly, in the framework of the proposed algorithm, the penalties to over-temperature and LIB degradation are embedded to improve the management quality in terms of the thermal safety enforcement and overall driving cost reduction. The proposed strategy is tested under different road missions to validate its superiority over state-of-the-art techniques in terms of training efficiency and optimization performance.

Abstract Solar radiation can be considered as one of the most suitable energy source to be used for cooking food. It is therefore important to promote advancement in solar cooking systems, in particular as concerns their efficiency and cooking times. In this work, we designed, realized and tested a novel low-cost solar cooker that uses a high-performance light-concentrating Fresnel lens, which is able to concentrate onto a small focal area a large amount of solar radiation. The radiation is then reflected by a mirror towards a cooking surface, where a pot can be located. The cooker has a geometrical concentration ratio of 40.97. In order to characterize the thermal performance of the cooker, we carried out several outdoor tests with a dedicated test setup, using water and silicone oil as absorbing media. Respect to other solar cookers, results show that the proposed cooker is able to reach high temperatures with good efficiency and reduced heating times: 3 kg of water can reach 90 °C in around 30 min, while 3 kg of silicone oil can be taken from 40 to 170 °C in less than one hour.

AbstractVegetation growth is affected by past growth rates and climate variability. However, the impacts of vegetation growth carryover (VGC; biotic) and lagged climatic effects (LCE; abiotic) on tree stem radial growth may be decoupled from photosynthetic capacity, as higher photosynthesis does not always translate into greater growth. To assess the interaction of tree‐species level VGC and LCE with ecosystem‐scale photosynthetic processes, we utilized tree‐ring width (TRW) data for three tree species: Castanopsis eyrei (CE), Castanea henryi (CH, Chinese chinquapin), and Liquidambar formosana (LF, Chinese sweet gum), along with satellite‐based data on canopy greenness (EVI, enhanced vegetation index), leaf area index (LAI), and gross primary productivity (GPP). We used vector autoregressive models, impulse response functions, and forecast error variance decomposition to analyze the duration, intensity, and drivers of VGC and of LCE response to precipitation, temperature, and sunshine duration. The results showed that at the tree‐species level, VGC in TRW was strongest in the first year, with an average 77% reduction in response intensity by the fourth year. VGC and LCE exhibited species‐specific patterns; compared to CE and CH (diffuse‐porous species), LF (ring‐porous species) exhibited stronger VGC but weaker LCE. For photosynthetic capacity at the ecosystem scale (EVI, LAI, and GPP), VGC and LCE occurred within 96 days. Our study demonstrates that VGC effects play a dominant role in vegetation function and productivity, and that vegetation responses to previous growth states are decoupled from climatic variability. Additionally, we discovered the possibility for tree‐ring growth to be decoupled from canopy condition. Investigating VGC and LCE of multiple indicators of vegetation growth at multiple scales has the potential to improve the accuracy of terrestrial global change models.