• Energy Research
• 3. Good health close
• 1. No poverty close
• DE close
• RU close

Proton conducting ceramics (PCC) cells are promising energy conversion devices that enable high efficiency energy conversion at lower temperature range, solving the challenge of conventional solid oxide cells (SOCs) due to the high operating temperature. Electrochemical performance and chemical stability of PCC electrolyte has been investigated in recent studies, suggesting that rare-earth doped Ba(Zr,Ce)O3 perovskite-type ceramics are optimal materials exhibiting high proton conductivity and chemical stability during operations. On the contrary, mechanical stability of these PCC electrolyte materials has not been evaluated despite the fact that the mechanical properties are critically important for achieving long-term stable operation as fuel cells or electrolyser cells. For the development of conventional SOCs, mechanical stability during high temperature operation was one of the most significant challenges to deal with, which was attained as a result of detailed studies on in-situ elastic properties of composing materials such as oxygen ion conducting electrolytes and residual stresses. Similarly, for PCC cells, mechanical properties of cells and composing materials have been of significant interest in order to achieve mechanically stable long-term operation, even though PCC cells operate at lower temperature than SOCs. Furthermore, the metal-supported (MS) structure which provides superior mechanical robustness compared to anode-supported (AS) structure is expected to be applied effectively to PCC cells, which are called proton conducting ceramics – metal-supported cells (PCC-MSCs), leading to greater necessity of the mechanical evaluation of the cells and composing materials. Electrolyte is the most crucial component in an electrochemical cell and must be mechanically stable because ion transport and gas tightness made by electrolyte determines electrical performance. However, there has been important concern that larger thermal stresses might be introduced in PCC cells compared to SOCs, resulting from the thermal expansion coefficient (TEC) mismatch between the electrode and electrolyte and from the chemical expansion by the hydration that occurs in a certain temperature range. The PCC electrolyte is highly in need of investigation on in-situ mechanical properties, especially on elastic properties. In this study, elastic properties of electrochemically promising PCC, Y-doped Ba(Zr,Ce)O3 perovskite-type ceramics, were investigated under high temperature conditions. Elastic moduli such as Young’s modulus and Poisson’s ratio were measured by the method that we previously developed for elastic investigation in high temperature conditions using ultrasonic waves. This method enables highly accurate and repetitive examination of elastic properties at high temperatures in materials with poor sinterability including PCC by measuring ultrasonic sound velocities in pellets typically fabricated for electrochemical tests. Pellets of BaZr1-xYxO3-δ (BZY) with different concentrations of doped yttrium, BaZr0.9Y0.1O3-δ (BZY10), BaZr0.85Y0.15O3-δ (BZY15), and BaZr0.8Y0.2O3-δ (BZY20), were fabricated. Additionally, pellets of BaZryCe1-yY0.1O3-δ (BZCY) with different ratio of Ce to Zr, BaZr0.7Ce0.2Y0.1O3-δ (BZCY721) and BaZr0.8Ce0.1Y0.1O3-δ (BZCY811) were fabricated. Powders of PCCs above were consolidated to be thick rounded shape and sintered in air. Each prepared sample was set in an electric furnace in laboratory air atmosphere and sound velocities were measured with the sample slowly heated up to 700 °C and subsequently cooled down to room temperature to calculate elastic moduli at each measuring point. In the first series of heating and cooling measurements for as-sintered samples, hysteresis on elastic moduli in intermediate temperature range was observed. We repeatedly conducted a series of heating and cooling measurements several times, and then the hysteresis was not observed any further. Fig.1 shows final state Young’s modulus of BZCY721, BZCY811, and BZY10 (BZCY901) without hysteresis. Elastic moduli at room temperature have not changed through multiple heating and cooling measurements, and crystal structures and lattice parameters were also confirmed to remain constant by x-ray diffraction (XRD) analysis. The hysteresis found in a specific temperature range suggests that elastic moduli were influenced presumably by a change in defect structure of PCC caused by hydration or defect association of oxygen vacancies and dopants. At room temperature, Young’s modulus decreased with the increment of Ce concentration by 16 % from BZY10 to BZCY721. When materials have the same crystalline structure, Young’s modulus generally decreases as mean atomic volume of the base crystal increases. Because BaCeO3 has larger mean atomic volume than BaZrO3, this observation is qualitatively reasonable. However, in high temperatures, the difference became significant only for BZCY721, Young’s modulus decreased by 30 % from that at room temperature in BZCY721. These results suggest that Ce substitution causes different high temperature dependences. Figure 1

The application of neutron emitting radioisotopes in brachytherapy facilitates the use of the higher biological effectiveness of neutrons compared to photons in treating some cancers. Different types of high intensity sources are in use for the treatment of different cancers. To improve the therapy of bulky tumors the dose can be augmented by the additional use of the boron capture reaction of thermal neutrons. This requires information about the thermal neutron dose component around the Cf source. In this work, a Mg/Ar‐ionization chamber internally coated with was used to measure the thermal neutrons. These measurements were performed on two different sources, one in use in the Gershenson Radiation Oncology Center at Harper Hospital in Detroit, MI, and one at the University Hospital of Chiang Mai in Chiang Mai, Thailand. The results of these measurements are compared and indicate that the differences in the construction of the sources influence the thermal dose component.

We analyze how countries with different institutional settings use natural resources for economic growth. For a panel of 159 countries over the period 1992–2010, we estimate how the effect of a permanent increase in the growth rate of GDP on the growth rate of resource use depends on political institutional quality. We study this relationship for total resource use and for its subclasses fossil fuels, biomass, non-metallic minerals, and metal ores. Our results show that the effect of an increase of economic growth on total resource use growth is higher for countries with higher political institutional quality. This result holds for the subclasses biomass and non-metallic minerals and in most specifications for metal ores. In contrast, we find no positive association for fossil fuels. We reconcile our results with endogenous growth theory and suggest technology and input prices as transmission channels. In this interpretation, our results highlight that institutions provide important framework conditions, but they are no general panacea to further decrease the resource dependency of economic growth.

Abstract A standard mechanical engineering mass transfer analysis is adapted to obtain performance calculations for the cathode of a typical polymer electrolyte membrane fuel cell. Mathematical details are provided and sample calculations performed, based on a number of simplifying assumptions. The relative advantages of low and high-mass transfer formulations are critically appraised and compared to a highly-simplified method.

AbstractSoil micronutrients are capital for the delivery of ecosystem functioning and food provision worldwide. Yet, despite their importance, the global biogeography and ecological drivers of soil micronutrients remain virtually unknown, limiting our capacity to anticipate abrupt unexpected changes in soil micronutrients in the face of climate change. Here, we analyzed >1300 topsoil samples to examine the global distribution of six metallic micronutrients (Cu, Fe, Mn, Zn, Co and Ni) across all continents, climates and vegetation types. We found that warmer arid and tropical ecosystems, present in the least developed countries, sustain the lowest contents of multiple soil micronutrients. We further provide evidence that temperature increases may potentially result in abrupt and simultaneous reductions in the content of multiple soil micronutrients when a temperature threshold of 12–14°C is crossed, which may be occurring on 3% of the planet over the next century. Altogether, our findings provide fundamental understanding of the global distribution of soil micronutrients, with direct implications for the maintenance of ecosystem functioning, rangeland management and food production in the warmest and poorest regions of the planet.

Abstract Proper water management plays an essential role in the performance and durability of Polymer Electrolyte Fuel Cells (PEFCs), but it is challenged by the variety of water transport phenomena that take place in these devices. Previous experimental work has shown the existence of fluctuations between low and high current density levels in PEFCs operated with wet hydrogen and dry air feed. The alternation between both performance states is accompanied by strong changes in the high frequency resistance, suggesting a cyclic hydration and dehydration of the membrane. This peculiar scenario is examined here considering liquid water distributions from neutron imaging and predictions from a 3D two-phase non-isothermal model. The results show that the hydration-dehydration cycles are triggered by the periodic condensation and shedding of liquid water at the anode inlet. The input of liquid water humidifies the anode channel and offsets the membrane dry-out induced by the dry air stream, thus leading to the high-performance state. When liquid water is flushed out of the anode channel, the dehydration process takes over, and the cell comes back to the low-performance state. The predicted amplitude of the current oscillations grows with decreasing hydrogen and increasing air flow rates, in agreement with previous experimental data.

AbstractClimate change strongly affects the health of sub-Saharan African populations. Effective adaptation strategies are required in order to enhance their limited adaptive capacities. The DFG-funded Research Unit (RU) “Climate change and health in sub-Saharan Africa” unites nine research institutions from Burkina Faso, Kenya, Germany, and Switzerland that will design, implement, and evaluate four different adaptation projects in these two African countries from 2020 until 2022.First, the effectiveness of an agro-biodiversification and nutrition program will be established for the reduction of child undernutrition of climate-sensitive nutrients in rural Burkina Faso and Kenya. Two respective cluster-randomized controlled trials (cRCT) will be conducted, each consisting of 2 × 600 children. Second, another cRCT will be conducted among 2 × 300 households in rural Burkina Faso to investigate how sunlight-reflecting cool-roof coatings affect human health outcomes, including cardiovascular and heat-related outcomes. Further outcomes comprise indoor temperature, carbon footprint, and productivity. Third, an index-based weather insurance (IBWI) will be introduced in rural Burkina Faso. The effects of IBWI on childhood nutritional status, dietary behavior, and healthcare seeking will be determined in 2 × 20 villages. Fourth, microbial larviciding has been evaluated as a promising environmental control for malaria vectors in Burkina Faso. Here, the interactions between climatic factors and the effectiveness of the intervention will be tested using spatiotemporal models.