• Energy Research
• Embargo close
• engineering and technology close
• DE close
• DK close
• US close

This perspective covers the use of molybdenum disulfide and related compounds, generally termed MoSx, as electro- or photoelectrocatalysts for the hydrogen evolution reaction (HER). State of the art solutions as well as the most illustrative results from the extensive electro- and photoelectrocatalytic literature are given. The research strategies currently employed in the field are outlined and future challenges pointed out. We suggest that the key to optimising the HER activity of MoS2 is divided into (1) increasing the catalytic activity of the active site, (2) increasing the number of active sites of the catalyst, and (3) improving the electrical contact to these sites. These postulations are substantiated by examples from the existing literature and some new results. To demonstrate the electrocatalytic properties of a highly conductive MoS2 hybrid material, we present the HER activity data for multi-wall MoS2 nanotubes on multi-wall carbon nanotubes (MWMoS2@MWCNTs). This exemplifies the typical data collected for the electrochemical HER. In addition, it demonstrates that the origin of the activity is closely related to the amount of edges in the layered MoS2. The photoelectrocatalytic HER is also discussed, based on examples from literature, with an emphasis on the use of MoSx as either (1) the co-catalyst providing the HER activity for a semiconductor, e.g. Mo3S+4on Si or (2) MoS2 as the semiconductor with an intrinsic HER activity. Finally, suggestions for future catalyst designs are given.

An amorphous WO3 induced lattice distortion strategy leads to only 2 wt% Ir for efficient overall water splitting in acid.

Self-organizing nanopatterns can enable economically competitive, industrially applicable light-harvesting platforms for thin-film solar cells. In this work, we present transparent solar cell substrates having quasiperiodic uniaxial nanowrinkle patterns with high optical haze values. The self-organized nanowrinkle template is created by controlled heat-shrinking of metal-deposited pre-stretched polystyrene sheets. A scalable UV nanoimprinting method is used to transfer the nanopatterns to glass substrates on which single-junction hydrogenated amorphous silicon p-i-n solar cells are subsequently fabricated. The structural and optical analyses of the solar cell show that the nanowrinkle pattern is replicated throughout the solar cell structure leading to enhanced absorption of light. The efficient broadband light-trapping in the nanowrinkle solar cells results in very high 18.2 mA/cm2 short-circuit current density and 9.5% energy-conversion efficiency, which respectively are 35.8% and 39.7% higher than the values obtained in flat-substrate solar cells. The cost- and time-efficient technique introduces a promising new approach to customizable light-management strategies in thin-film solar cells.

This study provides the first comprehensive overview of the sustainability performance of the hotel sector in the Himalayan region: Sagarmatha National Park and Buffer Zone, using both environmental, economic, and technical criteria. In particular, the performance of 45 buildings in this region were measured and quantified in terms of life cycle based carbon footprint, life cycle costs, heat loss rate, number of guests, energy consumption, and area. Buildings were classified into three types: traditional, semi-modern and modern. The statistical analysis included testing for significant differences between such categories by means of ANOVA, and determination of the correlation between the same parameters. Results show a significant difference between the buildings’ total carbon footprint and operation stage carbon footprint while, there is no significant difference between the buildings’ life cycle costs. Traditional buildings have on average the largest carbon footprint and life-cycle cost over the typical building lifespan of 50 years of building lifespan. The ANOVA tests highlight how heat loss rate, size of the building and number of tourists in the hotels are significantly different across the building types. A strong positive correlation is observed between environmental impact, economic impact and energy consumption for the household activities, and a negative correlation with the number of guests and building size. By considering several buildings, this study allows to draw new and more general conclusions about effective sustainability strategies in the whole hotel sector in the Himalayan region. In particular, it shows that reducing impacts in the operation stage should be highly prioritized, focusing on reducing energy consumption and heat loss and shifting to the use of renewable energy sources.

For layered oxide cathodes, aluminum doping has widely been shown to improve performance, particularly at high degrees of delithiation. While this has led to increased interest in Al-doped systems, including $\mathrm{LiNi_{0.8}Co_{0.15}Al_{0.05}O_{2}}$ (NCA), the aluminum surface environment has not been thoroughly investigated. Using hard x-ray photoelectron spectroscopy measurements of the Al 1s core region for NCA electrodes, we examined the evolution of the surface aluminum environment under electrochemical and thermal stress. By correlating the aluminum environment to transition metal reduction and electrolyte decomposition, we provide further insight into the cathode-electrolyte interface layer. A remarkable finding is that Al-O coatings in LiPF$_6$ electrolyte mimic the evolution observed for the aluminum surface environment in doped layered oxides. ECS transactions 80(10), 197 - 206 (2017). doi:10.1149/08010.0197ecst Published by Pennington, NJ

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

AbstractWe report a nickel complex for catalytic oxidation of ammonia to dinitrogen under ambient conditions. Using the aryloxyl radical 2,4,6‐tri‐tert‐butylphenoxyl (tBu3ArO⋅) as a H atom acceptor to cleave the N−H bond of a coordinated NH3 ligand up to 56 equiv of N2 per Ni center can be generated. Employing the N‐oxyl radical 2,2,6,6‐(tetramethylpiperidin‐1‐yl)oxyl (TEMPO⋅) as the H‐atom acceptor, up to 15 equiv of N2 per Ni center are formed. A bridging Ni‐hydrazine product identified by isotopic nitrogen (15N) studies and supported by computational models indicates the N−N bond forming step occurs by bimetallic homocoupling of two paramagnetic [Ni]−NH2 fragments. Ni‐mediated hydrazine disproportionation to N2 and NH3 completes the catalytic cycle.