• Energy Research
• Embargo close
• NL close
• FR close
• DK close

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

This perspective covers the use of molybdenum disulfide and related compounds, generally termed MoSx, as electro- or photoelectrocatalysts for the hydrogen evolution reaction (HER). State of the art solutions as well as the most illustrative results from the extensive electro- and photoelectrocatalytic literature are given. The research strategies currently employed in the field are outlined and future challenges pointed out. We suggest that the key to optimising the HER activity of MoS2 is divided into (1) increasing the catalytic activity of the active site, (2) increasing the number of active sites of the catalyst, and (3) improving the electrical contact to these sites. These postulations are substantiated by examples from the existing literature and some new results. To demonstrate the electrocatalytic properties of a highly conductive MoS2 hybrid material, we present the HER activity data for multi-wall MoS2 nanotubes on multi-wall carbon nanotubes (MWMoS2@MWCNTs). This exemplifies the typical data collected for the electrochemical HER. In addition, it demonstrates that the origin of the activity is closely related to the amount of edges in the layered MoS2. The photoelectrocatalytic HER is also discussed, based on examples from literature, with an emphasis on the use of MoSx as either (1) the co-catalyst providing the HER activity for a semiconductor, e.g. Mo3S+4on Si or (2) MoS2 as the semiconductor with an intrinsic HER activity. Finally, suggestions for future catalyst designs are given.

The luminescent solar concentrator has the potential of widespread use as a generator of electricity from sunlight well-suited for use in the urban environment owing to its adaptability in shape and coloration. The device performance is heavily dependent on the ability to transport light long distances to the edges. A common organic luminophore used in the device is based on a perylene core. In this work, we describe an overlooked effect of UV illumination on the appearance and efficiency of these devices. An additional absorption peak appears upon polymerization under intense UV in nitrogen atmosphere which significantly reduces the edge emissions from the device. The additional absorbance peak disappears after exposure to air, indicating the presence of a radical anion being formed during the UV light exposure. This suggests newly-produced LSC devices should be allowed to stand a period of time under ambient conditions before their performance characteristics are determined, which could have implications in potential future commercialization of the technology.

Abstract We focused on the production of docosahexaenoic acid (DHA)-containing microbial lipids by Aurantiochytrium sp. using of defatted soybean (DS) as a nitrogen source. Defatted soybean is a plant biomass that could provide a sustainable supply at a low cost. Results showed that Aurantiochytrium sp. could not directly assimilate the DS as a nitrogen source but could grow well in a medium containing DS fermented with rice malt. When cultivated in a fermented DS (FDS) medium, Aurantiochytrium sp. showed vigorous growth with the addition of sufficient sulfate and chloride ions as inorganic nutrients without seawater salt. A novel isolated Aurantiochytrium sp. 6-2 showed 15.8 ± 3.4 g/L DHA productivity (in 54.8 ± 12.1 g/L total fatty acid production) in 1 L of the FDS medium. Therefore, DHA produced by Aurantiochytrium sp. using FDS enables a stable and sustainable DHA supply and could be an alternative source of natural DHA derived from fish oil.

Self-organizing nanopatterns can enable economically competitive, industrially applicable light-harvesting platforms for thin-film solar cells. In this work, we present transparent solar cell substrates having quasiperiodic uniaxial nanowrinkle patterns with high optical haze values. The self-organized nanowrinkle template is created by controlled heat-shrinking of metal-deposited pre-stretched polystyrene sheets. A scalable UV nanoimprinting method is used to transfer the nanopatterns to glass substrates on which single-junction hydrogenated amorphous silicon p-i-n solar cells are subsequently fabricated. The structural and optical analyses of the solar cell show that the nanowrinkle pattern is replicated throughout the solar cell structure leading to enhanced absorption of light. The efficient broadband light-trapping in the nanowrinkle solar cells results in very high 18.2 mA/cm2 short-circuit current density and 9.5% energy-conversion efficiency, which respectively are 35.8% and 39.7% higher than the values obtained in flat-substrate solar cells. The cost- and time-efficient technique introduces a promising new approach to customizable light-management strategies in thin-film solar cells.

This study provides the first comprehensive overview of the sustainability performance of the hotel sector in the Himalayan region: Sagarmatha National Park and Buffer Zone, using both environmental, economic, and technical criteria. In particular, the performance of 45 buildings in this region were measured and quantified in terms of life cycle based carbon footprint, life cycle costs, heat loss rate, number of guests, energy consumption, and area. Buildings were classified into three types: traditional, semi-modern and modern. The statistical analysis included testing for significant differences between such categories by means of ANOVA, and determination of the correlation between the same parameters. Results show a significant difference between the buildings’ total carbon footprint and operation stage carbon footprint while, there is no significant difference between the buildings’ life cycle costs. Traditional buildings have on average the largest carbon footprint and life-cycle cost over the typical building lifespan of 50 years of building lifespan. The ANOVA tests highlight how heat loss rate, size of the building and number of tourists in the hotels are significantly different across the building types. A strong positive correlation is observed between environmental impact, economic impact and energy consumption for the household activities, and a negative correlation with the number of guests and building size. By considering several buildings, this study allows to draw new and more general conclusions about effective sustainability strategies in the whole hotel sector in the Himalayan region. In particular, it shows that reducing impacts in the operation stage should be highly prioritized, focusing on reducing energy consumption and heat loss and shifting to the use of renewable energy sources.

Industrial symbiosis (IS) is recognized as an effective practice to support circular economy and sustainable development because it is able to enhance the technical efficiency of production processes, provided IS relationships among companies remain active over the long period. However, although it has been established that IS relationships can be vulnerable to disruptive events that reduce the willingness of companies to cooperate in IS synergies, to date few contributions to the literature focus attention on the events which lead firms to interrupt IS synergies. This paper contributes to the existing literature firstly by highlighting the disruptive events affecting the willingness of companies to cooperate in IS synergies and their causes, and secondly by developing an analytical model to assess the impact of each disruption on physical and monetary flows created among companies by the IS relationship. Specifically, an enterprise input-output (EIO) model is proposed, aimed at mapping the physical and monetary flows resulting from IS synergies among companies. Through this model, disruptive events can be modeled and their impact on the above-mentioned flows can be assessed. A numerical case example illustrates how the model works and how company managers and IS facilitators could use it to evaluate to what degree their current IS relationships may be vulnerable to perturbations. The model could therefore facilitate the design of adequate countermeasures and contribute to the development of perturbation resilient IS relationships. Furthermore, policymakers could adopt the model when designing policy actions to support IS practice.

Synopsis The biological structures that fill the environment around us are derived from materials produced by organisms. These biological materials are key to the mechanical function of organisms. The pathways and growth processes that produce biological materials can influence the mechanical properties of the materials, which can in turn shape the higher level function of the system into which the materials are incorporated. Characterizing a biological system requires thorough knowledge of the underlying materials, including their mechanical function, diversity, evolution, and sensitivity to the environment. Anthropogenic activity is driving rapid and widespread changes to the natural environment and global climate, which are influencing organismal growth and physiology in myriad ways. Here, we briefly introduce a collection of articles that focus on the intersection of anthropogenic activity and the mechanical function of biological materials, as part of the “Global Change in a Material World” bundle for Integrative and Comparative Biology. In addition, we provide an analysis of the current scientific literature in this field, highlighting an urgent need to better understand how changes to our world, driven by human activity, are influencing the fundamental architecture and mechanical performance of organisms across the globe.

The production of charcoal for its many uses requires a careful selection of biomass and pyrolysis conditions, especially temperature, to ensure suitable quality. To do so, physical, chemical, and mechanical energy must be considered. This study aimed to analyze the yields and properties of charcoal produced at different pyrolysis temperatures. Eucalyptus saligna wood was pyrolyzed in a reactor with final temperatures of 450, 550, 650, 750, 850 and 950 °C. The yields of charcoal, pyroligneous liquid and non-condensable gases were determined. Mass loss was determined for each temperature. Charcoal analysis included the determination of the apparent density, proximate analysis, heating value, mechanical strength, X-ray images for the internal visualization of its structure and hygroscopicity test. Relevant charcoal properties for the steel industry and barbecue, such as density, mechanical strength, heating value and hygroscopicity, show variable trends from pyrolysis at 650 °C. The results show that pyrolysis temperature had a great impact on the properties of charcoal. The apparent density of charcoal rose from 500 °C and had no relation to the breaking strength. When the pyrolysis temperature was raised, an increase in both apparent and true densities, internal fissures and cracks and fixed carbon content of charcoal was observed.